Jabsco Rule Float Switch - 40A
3,200 - 3,201 Per Piece
1 Piece (MOQ)
· Dimensions: 127mm long, 40mm wide,110mm high (at max. lift)· Maximum Current: 14(amps)· For automatic on/off bilge pump control.· Switch design prevents rapid on/off cycling.· Also available with fuse holder - see below· Mercury Free· Packaged Dimensions: L:14.00 x H:11.00 x W:14.00cm· Actual Weight: 0.10 Kg (Approx. 0.30 Kg packed)
Cable Float Switch
Get Price Quote
We offer superior quality Cable Float Switch, made from high-grade material in our advanced precision manufacturing facility. These cable float switches are heat resistant, strong, easy to install and dimensionally accurate. All our cable float switches have to pass through our stringent quality checks for their accuracy and performance. We also offer customisation of these cable float switches based on the application they are needed for. We are a reputed manufacturer, exporter and supplier of cable float switches from New Delhi, India. Product Code : JKI-CFS-3M Product Specification : Leveraging on our rich industry experience, we are manufacturing, exporting and supplying the best quality Cable Float Switch. This switch is precisely manufactured by our highly skilled team of professionals using the progressive technology and superior grade raw materials in sync with international quality standards. Our quality controllers check this switch on well-defined quality parameters in order deliver the best quality products at clients' end. Further, we offer this Cable Float Switch at market leading rates to the clients. Features : Thermal resistance Sturdy construction Easy to fit Precise dimension Details : Level Switch for drinking water to sewerage. Switch differential is set with the help of a counterweight that can be adjusted alongside the cable of the switch. Our Level switches are non-toxic body materials and mercury free operated micro switch enable its use in drinking water applications. Maximum load - 15 A at 250 V AC, Contact Type - Micro Switch with NO and NC contact, Process temperature- -20°C to 80°C, Liquid density- min. 0.8, Housing material- Non-Toxic Polypropylene, Switch angle- +/-45°, Cable Length- 5 Meters (Extra cable length on request)
Best Deals from Float Switches
Water Level Control Float Switch
Get Price Quote
10 Piece (MOQ)
Sinicon water switch effectively monitors and controls water/liquid levels in the overhead tank, sump, and well etc. It prevents overhead tank from overflowing and also prevents overflowing of sump, well etc. Thanks to sinicon water switch, the user need not worry about switching the electric water pump on and off and makes water available round the clock. Functions & Features Fully Automatic Operation Switches water pump on when overhead tank is empty and switches water pump off when overhead tank is full Switches water pump off when sump/well is empty and allow pump to run only when the sump/well is filled up to the set limit. Extremely easy to install Fit and forget type and no routine maintenance required. Applications Villas, apartments, sewage plants, water treatment plants, mixing and filling plants etc. Special features on request Higher water columns (9535) Cable length (9525)
Cable Float Level Switch
350 - 450 Per Nos
2 Piece (MOQ)
Float Level Switches
Get Price Quote
1 Piece (MOQ)
Pyramid offer top or side mounted float type levels switches for various ranges. Float material of construction is ss 304 or ss 316.
Float Switch
Get Price Quote
A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm for water level in the tank. We have float switches range from small to large. It is a mercury switch inside a hinged float. A series of optical or conductance sensors produce discrete outputs as the liquid reaches many different levels within the tank. A float switch is used with water level controller indicator to know the current water level status in the tank.
Jabsco Rule Float Switch - 40A
3,200 - 3,201 Per Piece
1 Piece (MOQ)
· Dimensions: 127mm long, 40mm wide,110mm high (at max. lift)· Maximum Current: 14(amps)· For automatic on/off bilge pump control.· Switch design prevents rapid on/off cycling.· Also available with fuse holder - see below· Mercury Free· Packaged Dimensions: L:14.00 x H:11.00 x W:14.00cm· Actual Weight: 0.10 Kg (Approx. 0.30 Kg packed)
35A Jabsco Rule Float Switch
3,000 Per Piece
1 Piece (MOQ)
Details: For automatic on/off bilge pump control. Switch design prevents rapid on/off cycling. Also available with fuse holder - see below Mercury Free
Jabsco Rule Float Switch - 40A
3,200 - 3,201 Per Piece
1 Piece (MOQ)
>Dimensions: 127mm long, 40mm wide,110mm high (at max. lift)· Maximum Current: 14(amps)· For automatic on/off bilge pump control.· Switch design prevents rapid on/off cycling.· Also available with fuse holder - see below· Mercury Free· Packaged Dimensions: L:14.00 x H:11.00 x W:14.00cm· Actual Weight: 0.10 Kg (Approx. 0.30 Kg packed)
Cable Float Switch
Get Price Quote
series cfs cable float switch no hazardous mercury, adjustable counterweight cable float switch control the level of liquids in filling or draining reservoirs and tanks with the series cfs. The mercury-free switch is designed with an inverter microswitch housed in a polypropylene cover. The unit includes a counterweight to adjust the stop and start levels of pump up/pump down application. installation instructions: the installation is very easy by holding the cable with a small clamp in the reservoir or container. by fixing the counterweight to the cable, at a closer or farther from position float, the desired differential between the highest and lowest level can be freely adjusted. Several differentials between levels, against counterweight-to-float distance are given: installation of counterweight: insert the cable in the counterweight, from the conical part and rotate it, thus causing the plastic ring inserted in the opening to become detached (if necessary this operation can be facilitated with the use of a screwdriver). The ring should then be positioned in the point where it is desired to block the counterweight. force the counterweight on the ring by rotating it, using a slight pressure. if the counterweight position is to be changed, the counterweight should be retracted, the ring position changed and secured once again. other details: modelcable length cfs-26.5 ft (2 m) cfs-10 32.8 ft (10 m) related products model fpc-1200 duplex pump controller model fpc-1200 duplex pump controller series qpc quadraplex pump controller series qpc quadraplex pump controller series sld single channel leak detection relay series sld single channel leak detection relay series dpc duplexing pump controller series dpc duplexing pump controller series dld dual channel leak detection relay series dld dual channel leak detection relay
Float Switch
Get Price Quote
Cable Float Switch
Get Price Quote
1 Piece (MOQ)
Float level switch with mercury free microswitch can be used for the level switching of water and water based solutions. The float is hermetically sealed due to double chamber and its unique moulding process. Switch differential is set with the help of the counter weight that can be adjusted along the cable of the switch.
Float Switch
Get Price Quote
Available Features : Use wires:Black and blue with these contacts the regulator, Close when down, Open when up, The wire that is not used must be correctly insulated. Operating Range: Cable float level switch( water level controller, tank level switch) series can be used for long time after it being installed. Alost no maintenance and repairing problem would happen during its opera Float switch (cable float level switch) series apply to branch water, sewage, acid base solution of less than medium concentration oils and situation requiring on pollution( for example food and drinks industry), diesel oil gasification kitchen range, and automatic fuel feeding.
Mini Magnetic Float Probe Level Switch
800 - 1,500 Per Piece
01 Piece (MOQ)
Waterino Cable Float Switch
Get Price Quote
WATERINO cable float switch are widely used for controlling liquid levels in free flowing liquid tanks, pits. Our cable float switch are easy to install, reliable design and economical solution for trouble free operation. Switching of ON or OFF differential is adjustable by counterweight on the cable by determine free float cable between weight and float. No special arrangement is required to install the cable float switch, just hanging the cable from top of the tank as per required level will help to automate the emptying and filling up of tank. Our cable float switch can be used directly with single phase pump or to be used through control circuit in three phase pump set as per define current limit.Features It automates the start and stop of single phase electrical pump directly according to set water level. SPDT micro switch with NO & NC signal output. IP 68 Degree of protection.
Float Level Switches
3,200 Per Piece
2 Piece(s) (MOQ)
Our premium quality Float Level Switches are used along with the float level controllers, predominantly in water tanks to ensure that water doesn’t overflow or set an alarm when the water reaches the full mark. As a reputed manufacturer we ensure that we use only proven quality components and material to ensure durability and efficiency. We are also a well-known exporter of these products from Chennai in India.
Magnetic Float Switch
Get Price Quote
Float Switch
1,250 Per Piece
100 Piece (MOQ)
Cable Float Switch
Get Price Quote
1 Piece (MOQ)
Cable floats are a control device for filling and discharging pumps, motor and magnetic valves. It is also an alarm device at certain pre-determined surface levels.Special Feature An Economical, Viable alternative for control in liquid levels Simple, Rugged & Reliable Range: upto 10 mtr Switch rating: 10-14 Amp @ 230 VAC Material of Construction PVC suitable for most liquids Housing: Weatherproof to IP 66/68/ Flameproof – On request. InstallationCable Float switch is simply placed in liquid so that float follows the movement of the surface. The switch height differential is adjusted by moving the weight along the cable. If differential is minimum, when weight is nearest to the float. If the viscosity of the liquid is high, we recommend an extra weight on the cable.
Float Level Switch
Get Price Quote
We are offering float level switch.
Post Free Ad
5.0
