Fluid Bed Coater Dealers

Fluid bed coater have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles. The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size

• MODEL: FBD 30 FBD 60
• Gross Capacity (max kgs): 30 60

The FLUIDPRO Fluid Bed Processor makes drying and agglomeration possible in a single equipment. The basic equipment is 2-bar pressure shock resistant and consists of air handling unit, inlet chamber, product container, retarding chamber with finger bag assembly and exhaust unit consisting of exhaust blower. Uniform drying and rapid exchange of granules Single piece retarding chamber and finger bag chamber with inflatable gasket

• Voltage: 220V
• Power: 1-2kw
• Driven Type: Electric
• Warranty: 2years
• Automation Grade: Automatic
• Total Electric Power Kw: 3.75

Fluid bed coater is precisely designed for granule or pellet coatings and widely used in pharmaceutical industry. The basic concept of this coater or processor begins with a simple dyer unit to which various different option packages can be added for conversion to a granulation, pellet coating, and film coating. We at Nu Pharma Engineers & Consultant, come up with a new range of fluid bed coater in the market. Being a trustworthy Fluid Bed Coater Manufacturer from Gujarat, we make sure that the offered range of coater is processed using quality material and advanced technology. The offered equipment is featured with cartridge-type blowback filters, tangential spray, multiple spray nozzles, Liquid pumping system, and Controls for liquid pumping. The range of fluid bed coater offered by us is rugged in design, durable, easy to operate and maintain and give an optimum-level performance. As we are a well-reckoned fluid bed coater supplier in India, the offered equipment is thoroughly tested on different parameters by our quality examiners assuring their flawlessness before final delivery. You can buy this fluid bed coater from us at an industry-leading price.

The insulating coating is used on parts where you need good electrical resistance or insulating properties. The fluidized bed is used for coating of powder on component at 250 deg temperature. The component is oscillating in fluidized bed. The frequency of oscillation decides the coating thickness.

• Capacity CFM: 3000, 4000, 4500, 5500, 6000

Fluid Bed Processor is suitable for coating of fine drug pellets. These pellets are coated with the help of a Wurster design product chamber with bottom spray gun and partition in the centre of distribution plate. The air distribution plate is well designed to give uniform air flow for uniform coating without agglomeration. These pellets when coated with the solution will be lifted to such a height that they get fairly dried by the time they reach the product chamber thus avoiding agglomeration.

Fluid Bed Processing involves Pallets and Granules coating and drying of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Biotech, Nutraceuticals, Cosmetic, Chemicals, Biochemical, Food, Dairy, Confectionery, Agrochemical, Herbals, Ceramics, Detergents and Pharmaceuticals Institutes. The equipment is use application for following process. Aqueous or Solvent based solutions or suspensions Enteric Release coatings Controlled release coatings.

Our company is counted amongst the prime manufacturers and suppliers of Fluid Bed Particle Coaters in the markets. Our fluid bed dryer consists of a simple drying unit and helps in the conversion to a granulation or coater when optional packages are incorporated. Our dryers are available in standard pneumatic logic and sophisticated computerized controls and are also offered in Steam heated Model Attributes CGMP modelHeating media : Steam hot water electricityFace & bypass air handlingHigh static blowerDrying , granulating , coating & palletizing all in a single systemTwin chamber design for un-interrupted processSafety interlocks for operational ease2 bar pressure shock resistant construction Benefits Reduction in the amount of finesImprovement in the flow abilityImproved compressibility for tableting Controllable bulk densityOptimized solubility Kinds of coatings Lipid coatingTaste maskingMoisture and oxidation-protection coatingsEnteric coatingsVisual appearance Applications PharmaceuticalsBulk drugsChemicals

Fluid bed bottom Spray Coating called Wurster fluid-bed process is a technology for precision application of high quality reproducible films onto particulate materials such as powders, crystals, or granules. In bottom spray coating for wurster coating spraying is done from below upwards. The spray nozzles are integrated in the flow bed and thus completely swathe by the product. By combining flow bed and partition, a targeted and controlled movement of the particles can be achieved. This is the requirement for the optimal application of the coating materials to the particles.

Fluid Bed Processor & Coater GMP Model offers an effective and efficient method for drying, granulating, coating and agglomerating. It is invented keeping in mind the latest GMP norms with all contact parts AISI 316 Quality. By using modular construction and simplified design, we provide flexible installation. The Machine is vertical type, Steam Heated, Electrical controls Auto Mode, Arrangement for spraying an active ingredient on to the carrier bed for top spraying, Explosion proof and suitable for efficient accurate and uniform drying wet granulated pharmaceutical solid powder at lower temperature.

• Working Capacity in Kg.: 1
• Total Electric Power Kw: 3.75
• Drying Temperature: 40 to 85° C

Designed strictly compliance with the stipulation of cGMP. Product contact parts AISI 316 316 L Quality & Food grade silicon. Capacity available from 1 Kg to 15 Kg for laboratory and pilot scale plants. Single Pot Technology for mixing, drying & Agglomerating Inbuilt Inlet Air handler with S.S. Electric heater, 20 & 5 micron filter & 0.3 micron HEPA. Exhaust air blower with 20 micron filter. Option for Interchangeable Bowl 5 kg, 3 Kg, and 1 Kg. Option for advance PLC controls system with HMI Touch screen.

batch Capacity in Kg @0.5 bd:1.2 to 3 ,6 to 10,5 to 15 ,120. Blower motor HP *:5 ,7.5,10. Air Flow CFM ± 10 %:250,350,530.Drying Temp (deg.C):35-80, Contact Parts:SS 316.

• Container Volume in Liters: 2 Liters
• Batch Capacity in Kg at 0.5 bulk density: 500 GM. To 1 KG

The Fluid Bed system have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles. The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size.

We are offering fluid bed coater. Platinum fluid bed coater is suitable for coating of fine drug pallets. the pallets are coated with the help of a wrester design product chamber, with bottom spray gun and partition in the center of distribution plate. the air distribution plate is well designed to give uniform air flow for uniform coating without agglomeration. The pallets when coated with the solution will be lifted to such a height that they get fairly during by the time they reach the product chamber thus avoiding agglomeration. standard design features: all contact parts ss 316 all other parts ss 304 electric heaters steam heaters with inlet ahu advantages: coating is done with the minimum loss of spraying solution coating uniformity on pellets high efficiency drying operational time 60% of the coating pan time pellet stability improved. Zero pollution zero maintenance cost very economical description of equipment a bottom section jack box made out of ss 304g which connects the bottom of the product container to the inlet air plenum the bottom part of the inlet air section is equipped with a water drain port for easy cleaning & easy drain, a inlet butterfly damper valve flap close / opened function with a help of pneumatic actuator. ï�� inflatable gasket (silicon) arranged in bottom end of the expansion chamber, the inflatable gasket worked through plc panel which makes the system leak proof by symmetrically sealing the product container to expansion chamber, as well as bottom jack box to container sealing with container top & bottom joints. following features of machine parts:- product container with spray guns â�� 3,4 noâ��s ï�� product container made out of ss316 g, with view glass or window and over all conical shape to be suitable for container conical shape. Product container with product bed temperature port, sample taking port & quick disconnection to bottom perforated plate from the product container. ï�§ wurster product container made out of ss 316g doing with bottom section to facilitate fixing of spray nozzles 3 cylindrical partitions and perforated plate to be provided. Product container shall be provided with whurster cylinder located inside with sliding adjustment facility upto 40mm height. Ï�§ central bottom suction discharge port. Ï�§ 3head peristaltic pump with table trolley. product container trolley ï�� the trolley made out of ss 304g, with arrangement 4 noâ��s of castors (nylon / polyurethane) to support and mobility for the product container / wurster container. Castors housing made out of ss304g. nozzle chamber ï�� nozzle chamber is made out of ss304g, wurster spray guns are holding on the circumstances area. It will be easy removing purpose for spray gun nozzle. This chamber attached to the bottom of the product container. expansion chamber with charging port ï�� expansion chamber is made out of ss 316g, this chamber is using for drying & coating purpose. View glasses are fixing from the front side of the chamber, itâ��s used for observe the material status (drying, coating, shaking of the filter bag) in the chamber. ï�� its equipped with 3,4 nozzle port and control of panel prepared for fluied bed coating. The housing provided with view lamp matching view window for illumination. ï�� exhaust air ducts connected to the exhaust air duct work by a â��yâ�� junction connected with exhaust air temperature port located in the exhaust air duct including pt 100 sensor, pneumatically operated leak pipe close / open chamber flaps and one non leak tight pneumatically operated modulating exhaust air flap with the help of actuator and positioner. ï�� earthing system between machine and control panel upto operating terminal will be provided, all metal parts are properly grounded to lead any electrostatic charge to the grounding system. (main earthing point to be done by customer). ï�� suction inlet material charging port with butterfly damper valve flap close / opened function with a help of pneumatic actuator. mesh & filter housing chamber ï�� filter housing chamber allows continuous fluidization during the cleaning of filters and consists of pressure relief flaps one set of product filter assembly suspended on a stainless steel support ring with ss hocks. The lower end of the filters are sealed to the filter housing by using of inflatable gasket. Automatic pneumatic shaking system with each pneumatically operated shaking cylinder of the purpose of shaking filter, during the working process to remove fine material from the filter and to return it back to the product container. ï�� mesh housing chamber allows continuous fluidization during the changing & washing of mesh construction of electro pneumatically operated cylinder assembly suspended on a stainless steel eye bolt with clamping. Bottom of the mesh are sealed to the mesh housing by using inflatable gasket. explosion chamber ï�� explosion chamber top of the chamber of the equipment, made out of ss316g, it contains pressure relief disc horigentally along in a 2 bar upto 1.5mtr is part of the supply. A top lid will be arrange the top of the explosion chamber with easy removable accessibility. exhaust air blower ï�� ms centrifugal type powder coated from fan with ms hub statically and dynamically balanced. ï�� the fan or impeller is directly coupled to a 3phase squirrel cage induction motor through hub of the impeller (flp / non-flp). ï�� the fan housing is made out of ms with powder coated paint and equipped with a rigid plate as well as with a water drain point and cleaning window point. ï�� the blower is mounted on a base frame vibration absolves by using anti-vibrating pads. ï�� the inlet port of the fan is arrange with flexible connector during avoid the vibration of the blower to the machine. ï�� the blower motor starter (star & delta starter) are mounted in the separately supplied powder coated panel board. inlet air handling unit ï�� ahu unit made out of double skin ss304g body (panels) with puff insulation and structure construction is made out of aluminum section. ï�� inlet air filters (flange type) eu4 including door for easy access. ï�� face & bypass temperature controlling system to approach optimized temperature. ï�� inlet air heaters for steam tubes (seamless) and fins made out of ss304g. ï�� inlet air filters (flange type) eu7 door for easy access to arrangement of injues. ï�� differential pressure across eu7 is indication at that place. ï�� pneumatically operated on/off steam control valve to be installed in series connection of the pipe line as like as steam strainer are supplied by (platinum) remaining valves and taps are customer scope or end user. control panel with plc system ï�� plc panel with hmi touch screen. (mitsubishi plc) ï�� front panel / operating panel board made out of ss304g along with a printer equipped with a plc based controls for the fallowing functions :- ï�§ emergency push button station for emergency stopping of a machine and locking of machine off position. ï�§ this push button station is mounted on the front panel or support column. ï�§ machine operation pressure gauge for pneumatic accessories to be put on the front panel. ï�§ pressure gauges arranged in front panel to mentoring the sealing gasket pressure. .plc operations ï�� filter bag / mesh sealing with inflatable gasket. ï�� product container sealing with inflatable gasket. ï�� inlet air temperature control with pid. ï�� exhaust air temperature will be displayed. ï�� filter bag shaking on / off ï�� filter bag shaking duration ï�� filter bag shaking interval. ï�� steam on / off ï�� process on / off ï�� liquid pump on / off ï�� spray gun atomization air on / off ï�� interlocking alarms. the following electrical accessories are mounted in ms powder coated panel. ï�§ pneumatic components and controllers ï�§ pneumatic connectors & terminals ï�§ main switch ï�§ control transformer ï�§ motor star delta starter ï�§ over load relays ï�§ smps (switch mode power supply) ï�§ mcb (miniature circuit breaker) control panel with rlc system ï�� blower on/ off ï�� heating low / high (steam or electrical) ï�� product container sealing on / off ï�� spray gun air on / off ï�� spray gun air regulator with gauge ï�� display the inlet , outlet and product temperature. .

Description: SHEE BHAGWATI Mutifunctional Fluidized Bed  combines the top spray granulating ,drying , bottom spray coating and tangent spray pelleting,coating etc. into one unit in pharmaceutical,chemical industry,foodstuffs etc. SHEE BHAGWATI MUTIFUNCTIONAL FLUIDIZED BED  HAS FOLLOWING PROCESSES: Mixing: All products which can be fluidized e.g. powder, granules, extrudates, pellets etc. are homogeneously mixed in the Jinggong fluid bed process unit. By using special air flow (horizontal , radial and tangential ) to make the mixing prfect. Drying: All products which can be fluidized up. GranulationPowdery products. By spraying of binders nearly every requested granules can be produced. Features: With high efficiency, spray granulating could be accomplished within 60-120 minutes WURSTER coating system makes the pellets only contact with the atomizing area to improve the speed and uniformity of coating. centrifugal rotary disc technology and heating air for tangent spray to make pellets directly from power These three function to be conducted in the closed machine so as to prevent the dust polluting the workshop. The whole machine is made of stainless steel SS316,SS314 that will not react chemically with the material.   Operate easily, and can set many groups of parameters Anti-explosion,2bar,10bar,12bar can be chosen toguarantee Safety. Dehumidification system and WIP online cleaning system are optional can print and record operation parameters under the control of PLC and HMI

ACMEFIL Fluid Bed processing includes Drying as well as granulation, agglomeration and coating of particulate materials. It is designed to uniform drying of the material at low temperature and is ideal for a wide range of both heat sensitive and non-heat sensitive prodcts for low moist powder. In case of fluid bed coater cum granulator, agglomeration and granulation may be performed in a number of ways depending upon the feed to be processed and the product properties to be achieved. Fluid bed coating of powders, granules involves the spraying of a liquid on the fluidised powder under strictly controlled conditions. We offer fluid bed drying system made up of S.S.304 / S.S. 316 with GMP standards. The complete unit is supplied with suitable motor, blower, filters, filter bag, & control panel. Heating system will be provided as per customer requirement i.e. Steam / Electric Heating system and any other. Salient Features Availabale capacity of Fluid Bed Dryer is 2.5 Kgs to 300 Kgs. Time, space, energy and labour saver Automatic shaking arrangement Safe earthing device with low voltage relay Design confirming to cGMP norms and its documentation Flame proof electrical PLC for automation and control Single piece construction with modular type design HEPA Filtration system Dehumidification of inlet air Solid Particle Flow Monitor Sampling port on product container   APPLICATIONS OF FLUID BED GRANULATOR CUM COATER Fluid Bed dryers have universal applications like: Chemical Industry Pharmaceuticals Industry Bio-Chemicals Industry Polymer Industry Food and Dairy Products Industry

• Brand Name: solace
• Driven Type: Mechanical
• Power: 10-12kw
• Automation Grade: Fully Automatic
• Weight: 1000-1500kg
• Country of Origin: India

We are offering fluid bed coater. The modern effective medicines aimed at increased bio-availability of the drug and sustained release of to various ingredients have introduced many innovative processes in manufacturing and delivery of the drugs. The solace fluid bed coaters offer a unique and economical process of coating powders, pallets and granules coupled with perfect drying. These fluid bed dryers use wurster technology, world’s best bottom mounted choke-free spray guns and specially designed cartridge filters for a perfectly coated product. The equipment is capable of handling any of the following: aqueous or solvent based solutions or suspensions. controlled release coatings enteric release coatings fine particle coatings active layering

Fluid Bed Coater, pharmaceutical filters, fluid bed granulator

Fluid Bed Coater, liquid oral manufacturing plant

• Brand Name: spt fluid bed coater

We offer fluid bed coater 90 kg ,300kg, 500kg four spray gun model ,48 and 96 no tray drier ,48" coating pan ss tanks .

Fluid Bed Coater, Coating Pan, Ceramic Batch Ball Mill

Fluid Bed Coater, High Shear Mixer, vacuum transfer system

Fluid Bed Granulator Cum Coater, Spray Pyrolysis System, fluid bed granulator

Fluid Bed Granulation Coater, air jet cleaning machine, Packing Conveyor

Fluid-Bed Granulator Coater, steam coil, Revolving Coating Pan

Fluid Bed Coater, wet granulator, Granulator Dryer

fluid bed coaters, spheronizer, Dry Heat Sterilization System

Fluid Bed Coater, Powder Transfer System

fluid bed particle coaters, Blending System, rotary vacuum driers

fluid bed coaters