High Temperature Fluidized Bed Reactor
Get Price Quote
We are instrumental in the manufacturing and supplying of high performing high temperature fluidized bed reactor range. The high temperature fluidized bed reactor offered by us is extensively used for the purpose of fero chrome/ feronickel ore reduction in co and lpg gases. We offer high temperature fluidized bed reactor at market leading rates to the valued clients.
0.0
View Profile
Fluidized Bed Reactor
2,000,000 - 20,000,000 Per Piece
1 Piece (MOQ)
· Volume: 500 ml to 200 Ltr. Pressure Range: up to 12 bar Temperature Range: up to 1050°C · Amar has been leading manufacturer and exporter of fluidized bed reactors and systems in India since past many years. · A fluidized bed reactor is a vertical cylindrical tube having 2 sections i.e., reaction section & disengagement section. · Even temperature distribution throughout the burning zone, while solid catalyst particles are freely suspended using gas of high velocity. · Product is collected from top & solid residue collected from the bottom. · Solid Feed: - Batch/Continuous. · Uniform particle mixing. · Uniform temperature gradients. · Catalyst/solid can be fed from top/bottom while gas/liquid is fed from the bottom. · Explosion proof plants for hazardous area. · Automation: Customisable unit is offered for gas / liquid / solid feed combinations, product outlets, multi zone heating furnaces etc. with integrated controls, high level of safety, automation, and SCADA software Application: Packed Tubular reactors are extensively used in chemical and associated industries such as petroleum, petrochemical, oil and gas, mineral and coal industries, pharmaceuticals, fine and specialty chemicals, and biochemicals. Applications may vary considerably from industry to industry and may include cracking of large organic molecules into useful desired products, upgrading petroleum feedstock, conversion of unsaturated organics into saturated products, conversion of coal-derived products, syngas generation, pyrolysis reactions, biomass / coal gasification reactions, multi-purpose reactions, vapor phase reactions, conversion of gaseous reactants into fuels, hydrodeoxygenation (HDO) of bio-oils (upgrading), polymerization of monomers for a variety of commodity applications, liquefaction reactions, etc.
0.0
View Profile
Best Deals from Fluid Bed Reactor
fluidized bed stucco machine
300,000 Per Set
Equipment name: fluidized bed stucco machine model name: - fbs - 550 fbs - 750 application: the fluidized bed types of stucco machines are meant for backup stucco. It is used for refractory sands of larger grain sizes like - 16 +30, -30 +40, or -60 +80. For the backup coats, the fluidized bed gives a uniform coating and higher stucco efficiency. specifications and salient features: • type : blower driven type. • m o c : m. S. • overall size : fbs – 550 - 675 (dia) x 1020 (h). fbs – 750 - 850 (dia) x 1290 (h) • work area : fbs – 550 - dia. 550mm x 550mm fluidized sand ht. fbs – 750 - dia. 750mm x 550mm fluidized sand ht. • drive : fbs – 550 - 5 hp (3.75kw) blower. fbs – 750 - 10 hp (7.5kw) blower. • dust collection : a dust collection chute is provided. When connected to an efficient dust collector, this will enable uniform suck out the dust generated during operation. Machine features : ➢ refractory sands of -16 +30, -30 +40, or -60 +80 or similar mesh sizes are thoroughly fluidized in the fbs ➢ the fbs is a set containing 2 fluidized beds and one blower. ➢ purpose designed air distribution nozzles are used to ensure uniform fluidizing of the stucco sands. ➢ baffles are provided in the air line and the dust collector line, to enable control the air flow. ➢ dust collector port is provided to connect suitable dust collector to the fluidized beds. ➢ the fluidized bed provided with a 1” dia. Drain port. If the sand is fluidized with drain port open, all the refractory sand flows out of the bin through the drain port. ➢ the fbs has been ergonomically designed to maximize worker comfort. ➢ note: the blower power is subject to the density of the sand.
0.0
View Profile
FLUIDIZED AEROBIC BED REACTOR
Get Price Quote
The FBR process is the latest advance in attached growth aerobic biological treatment technology. FBR employs RING PAC MEDIA, neutrally buoyant bio film carrier elements, to achieve outstanding BOD/COD removal productivity from a compact bioreactor. In Fluidized Bed Reactors, the liquid to be treated is pumped through a bed of small media at a sufficient velocity to cause fluidization. In the fluidized state the media provide a large specific surface for attached biological growth and allow biomass concentrations in the range 10-40 kg/m3 to develop. For aerobic treatment processes the reactor is aerated. This is done by recalculating the liquid from the reactor to an oxygenator where air, or possibly oxygen, is bubbled. To overcome problems related to high re-circulation rates, needed when there is high oxygen demand in the reactor, the reactor might be aerated directly. The basis for the use of fluidized bed systems is the immobilization of bacteria on solid surfaces. Many species of bacteria (and also other microorganisms) have the ability for adhering to supporting matrices. In this process, a volume of Ring Pac media is immersed in water and is fluidized (kept in constant motion) through the movement of gas and liquid in the treatment reactor. As the media supports a biomass concentration several times that achievable in activated sludge systems, treatment is significantly more productive. Advantages The FBR requires very less hydraulic retention time (HRT) compared to an extended aeration or activated sludge process to perform the same BOD reduction duty. High resident biomass concentration, intense mass transfer conditions and aggressive biomass-sloughing action enable the process to rapidly respond to variations in process load Less footprint area required for installation. Less operation and maintenance cost during plant operations.
0.0
View Profile
Fluid Bed Reactor
500,000 Per Piece
0.0
View Profile
Fluidized Bed Bio-Reactors
Get Price Quote
In Fluidized Bed Reactors, cells are "immobilized" in small particles which move with the fluid. The small particles create a large surface area for cells to stick to and enable a high rate of transfer of oxygen and nutrients to the cells. The fluidized bed reactor is most suitable when a high viscosity substrate solution and a gaseous substrate or product are used in a continuous reaction system. Here also we have four phases in treatment i.e. Preliminary treatment, Primary, Secondary & Tertiary Treatment. Preliminary Treatment In Preliminary treatment removal of contents as Poly-ethenes, Papers, fibres, Vegetable & edible pieces, grits, Oil â grease etc. by bar Screening chambers & Oil-trapping is carried out in the equalization sump. Primary Treatment In the next Primary Treatment stage we go for chemical treatment for adjusting ph and this chemical dosing is optional will depend on the raw water. Secondary Treatment In the secondary Treatment Removal of organic matters suspended solids by Biological treatment, decomposition and Clarifications are carried out with specialized attached growth biological treatment technology. Here the Biological action takes place in aeration tank , tube settlers and the clarified water is passed to chlorine contact tank. Tertiary Treatment In the Tertiary Treatment the water from chlorine dosing tank is allowed to settle in buffer tank. From Buffer tank the water is pumped to sand filter & carbon filters respectively. Features Removes hydrocarbons and BOD/COD.Uses oxygen transfer with a large protected biofilm attachment area.Incorporates neutrally-buoyant Media Pac.CompactNo/Less Civil work.Low Operational cost.Easy Maintenance & Operations.Portability.Reduced Noise.Quick InstallationMin Sludge
0.0
View Profile
Fluidized Bed Reactor
500,000 Per Piece
0.0
View Profile
Fluidized Bed Reactor
350,000 Per Unit
0.0
View Profile
Fluidized Bed Reactor
Get Price Quote
1 Piece(s) (MOQ)
We are offering fluidized bed. Film formation on dipping is dependent on the material resistivity. Resistivity of the material should remain practically constant for the equally coating at all surface of the sample. Dipping-coating is well suited for high quality coating of relatively all shapes. For uniform formation of coating, resistivity of coating material should be reduced. The process to reduce its resistivity and which make it act like fluid is called fluidization. Process is to make it fluidized by applying air through it. The resistivity of material will reduce and will act like a fluid. Unit is supply with instrument which makes act powder as fluid during coating process.
0.0
View Profile
Fluidized Aerobic Bedreactor
Get Price Quote
We are offering fluidized aerobic bedreactor.
0.0
View Profile
Fluid Bed Reactor
Get Price Quote
Fluid Bed Reactor, Chlorine Dioxide, Chlorine Dioxide Powder
0.0
View Profile
Post Free Ad
