Frequency Counters Dealers

• Frequency measurement :: 0.01Hz – 2.4 GHz
• Period measurement :: 0.5µs – 10s
• Input sensitivity :: 30mV(rms)
• Power :: AC 110/220V ± 10%

We have in our store a high performance range of Frequency Counter FC3165. These are hand held, compact and highly stable instruments. Their display is designed to give clear readability also in bright sunny ambiances. Specification: 8-digit LED display, clear readingRange and gate time adjustable continuously (100ms – 10s)Selective rangeHigh stability

Product Category :  Electronics Measuring Instruments Demonstrator (Series : 800)Product Name : Digital Frequency Counter Demonstrator  Model No. : SE-805Product Details : This has Built-In DC +5V/±12V/500mA fixed power supply, on board sine wave input signal generator with variable frequency upto 100KHz and variable amplitude upto10 Vp-p, the circuit uses associate circuitry of Schmitt trigger, driver, PLL frequency multiplier with logical & BCD Counter circuit to drive the LED Seven segment displays to indicate the frequency of applied input signal, Indication on three CC LED Seven segment Display, Frequency counter range 100KHz maximum, complete setup with maximum test points. Objectives : To Study the Principle of Digital Frequency Counter. To observe and note the output frequency on LED Seven segment display w.r.t. the applied variable input signal frequency. To compare the Observed (Practical) value with applied theoretical value. Accessories Included :  Set of Patch Cords, Operating Manual  

• Features: Built-in STOPWATCH to measure duration, Selectable attenuator of X0.1 (Hig h voltage, low frequency)/ X1/x10/x50 (low amplitude, high frequency).
• Item Code: FC-50M-FC2G

• Signal Frequency Range: 0-5MHz; Frequency Counter range
• Outputs: One channel of Arbitrary Waveform; 8 Bits signal; Synchronized signal
• Inputs: Two channels of Frequency counter; 8 Bits signal; External Trigger
• General waveforms: Sine, Square, Triangle, Saw-tooth, TTL, White Noise, Gauss noise, Exponent, AM, FM
• Settable Parameters: Amplitude, Frequency, Offset

• Power: AC 110/220V ± 10%
• Frequency measurement: 0.01Hz – 2.4 GHz
• Period measurement: 0.5µs – 10s
• Input sensitivity: 30mV(rms)

We have in our store a high performance range of Frequency Counter FC3165. These are hand held, compact and highly stable instruments. Their display is designed to give clear readability also in bright sunny ambiances.   Specification: 8-digit LED display, clear readingRange and gate time adjustable continuously (100ms – 10s)Selective rangeHigh stability

Frequency Counter Salient Features Wide Frequency range: 2 Hz to 50 MHz. Built-in STOPWATCH to measure duration(max. 27 Hrs.) between two optically isolated start/stop events with resolution of 1msec. 8 digit 0.5" bright red display with accuracy of + 1 count + stable crystal controlled time base accuracy. I/P voltage 300 Vpp max. Selectable attenuator of X0.1(High voltage, low frequency)/ X1/ X10/ X50 (low amplitude, high frequency). Sensitivity of 50 mVpp min two separate inputs with sensitivities of 250 mVpp and 50 mVpp min. Input impedance of 1M?. Useful for testing and measurement in the laboratory and on field.

• Brand Name: Radical

Digital Frequency counter  SALIENT FEATURES: Features: ·  8digits green LED display ·  Selective range, high stability ·  Two Channels, operation mode memory ·  Range and gate time adjustable ·  Power supply: AC 110V/220V, +10%, Max. consumption : 5W     Technical Specification: ·         Frequency Range : 0.01Hz ~ 2.4GHz ·         Cyclic Measurement Range : 0.5nS ~ 10S ·         Attenuation : 20dB ·         Channel A (40MHz ~ 2.4GHz) : Sensitivity: 50m Vrms Input resistance: 50Ω Maximum Input: 3V ·         Channel B (0.01Hz ~ 40MHz) : Sensitivity: 30m Vrms Input resistance: 1MΩ (<35pF) Maximum Input: 30V ·         Accuracy : Time base error x Frequency+1Digit ·         Time Gate : 100ms ~ 10s ·         Input Impedance : 1MΩ ·                 Standard Accessories  : Power Cord, Manual           ·                 Dimension                      :270 x 215 x 100mm

• Power: 0-25W
• Voltage: 220V
• Type: Frequency Counter
• Weight: 1000-2000 Gms
• Frequency: 50Hz
• Country of Origin: India

Our company is counted as one amongst the forefront Digital Frequency Counter Suppliers in India. Catering the requirements of the national as well as international clients, the company has acquired noteworthy position amidst the reliable Portable Frequency Counter Exporters. Additionally, we offer Frequency Counters that comply with the international standards in terms of quality, performance and output.

The SM5051 is a high performance Universal Counter. The instrument has three high sensitive inputs and provides signal measurement capability from 01 Hz to 1 GHz. Period measurement can be done from 1 us to 100s. With a very high timing resolution, precise measurements can be performed in the period averaging mode. This enables reliable measurements in fast logic circuitry. SM5051 has been designed to deliver optimum performance at low cost with high reliability in diverse applications such as frequency monitoring, production testing , research and development and education amongst others. Features Frequency Range 0.1 Hz to 1 GHz Sensitivity 20mV max. Period Measurement & Event Counting Automatic Positioning of Decimal Point Leading Zero Suppression

• Type: Frequency Counter
• Certification: ISO 9001:2008 Certified
• Voltage: 110V, 220V
• Frequency: 50Hz, 60Hz
• Automation Grade: Automatic
• Dish Size: 0-100mm

We are the main supplier of this product.

The Frequency Counter offered by us is the instrument that is used for measuring the frequency. It usually measures the frequency by measuring the number of pulses or oscillations per second in repetitive electronic signal. It is a microprocessor based counter that measures frequency, pulse and crystal measurements. It is a high resolution multi-functional counter with 5-range function select, 8-digit LED display and 4-step gate time. Our frequency counter finds application in Indian defense academy, telecommunication industry, military, aerospace and many more.   

• Usage/Application: Industrial
• Model Name/Number: VC-3165
• Brand: HTC
• Frequency Range: 0.01Hz
• Power Supply : AC 110V/220V

The Keysight 53200 Series of 350 MHz RF and universal frequency counter/timers serve all of your frequency and time interval measurement needs. Three available models offer resolution capabilities up to 12 digits/sec single-shot frequency resolution on a one second gate. Single-shot time interval measurements can be resolved down to 20 psec. All models offer new built-in analysis and graphing capabilities to maximize the insight and information you receive. Use the connectivity of your choice: LXI-C/Ethernet, USB, GPIB. Additionally, an optional battery is available to increase portability and maintain timebase accuracy.

• Output Voltage Range: 0 to 1000 V
• Output Current: 0 to 100 amp.

Frequency counter in various industries and Educational Institutes. The output voltage produced by DC power supply ranges from 0 to 1000 V and output current ranges from 0 to 100 Amp. Power supply are provided with Digital Panel Meters for voltage and current .

3 ranges, 2500 MHz, 100 MHz, 10 MHz. Frequency, Period, Hold, Relative, Max., Min., Average, 8 digits LCD. High sensitivity for VHF & UHF frequency. Size : 173 x 80 x 35 mm, Portable type.

We are offering frequency counter. features: • 8 digits green led display • selective range, high stability • two channels, operation mode memory • range and gate time adjustable • power supply: ac 110/220v +10%, max consumption: 5w standard accessory: power chord, manual dimensions: 270 x 215 x 100mm

Scientech 4093 Frequency Counter is a multifunction Frequency Counter based on state of art technology. Scientech 4093 Frequency Counter measures signals over a wide range from 0.1 Hz to 1000 MHz. Two selectable gate time fixed values: 1s and 10s are provided. Scientech 4093 Frequency Counter provides high performance, and stability at low cost. The Counter can measure Frequency and Period. It has 3 step Frequency range selection, and LCD display. Product Features Frequency measurement from 0.1Hz to 1000MHz Frequency range selection in 3 steps Two selectable Gate time; 1s, 10s Frequency and Period measurement Digital readout with backlit LCD Microcontroller based design Attenuation of 20dB and input impedance of 1MΩ (Input A) Low power consumption Easy to operate Online Product Tutorial