Fuel Sensor Dealers

• Brand: Filpro
• Flange Material: Aluminum
• Permissible Load: 500 Ohm
• Measurement resolution: 5 mm
• Output: 4 to 20 mA
• Input: 24 V DC
• Probe Length: 2000 mm
• Operating Temperature: -25 to +100 DegC
• Accuracy: 0.50%

• Country of Origin: Russia
• Type: Fuel Sensor
• Material: Metal
• Application: Fuel Levelling
• Color: Black
• Feature: Suitable For Sensing Level
• Voltage: 0-15VDC, 15-30VDC
• Automatic Grade: Automatic
• Driven Type: Battery
• Warranty: 3yrs
• Brand Name: Mielta

• Wetted Parts: Anodized Aluminium
• Flange: Aluminium or MS
• Enclosure: Aluminium or Plastic
• Probe Length: 150mm to 2000mm
• Input: 12 to 24V DC
• Output: 4-20mA, 0-5V, 0-10V, RS485 0/P
• Connection: 3 core cable l mt

Fuel level sensoris a low cost capacitance type level sensor. It is designed for monitoring levels in fuel tanks of vehicles, Bulk storage tanks fitted on vehicles, diesel storage tanks. The Design is simple & light weight. It measures the level accurately and reliably. The sensor output is connected to vehicle monitoring and tracking system or level indicators. The sensor consists of measuring probe which is encircled with a reference probe. This given more linear output and is not affected by turbulence inside the tank. Fuel Level Sensor As the fuel level increases, the capacitance value also increases. The fuel acts as the dielectric between electrodes. The increase in capacitance directly proportional to increase in fuel level. This change in capacitance is measured and converted into 4-20mA, 0-5V, 0-10V, RS485 O/P.

• Brand Name: Omnicon
• Material: Plastic
• Country of Origin: Made in India
• Usage/Application: Fuel Level Monitoring
• Model Name/Number: LLS 4
• Fuel Rod length: 32 cm

• Material: Plastic
• Weight: 50 - 400 gm
• Warranty: 6 Month
• Color: Black

• Enclosure: Aluminum anodize/S.S-304/S.S-316
• Rotor: Aluminum anodize/S.S-316/PPS
• O-ring: NBR/Viton
• Shaft: Hard Stainless Steel-316
• Accuracy (standard installation position): +/- 0.5% ( Higher on request)
• Maximum working pressure: 10MPa
• Fluid &Ambient temperature: -40 to80 Deg
• Power voltage: 5 - 24V DC
• Connection: Threaded M/F / Flange

• Material: Plastic, Aluminum
• Voltage: 24 V
• Current: 0.5A
• Length Range: 110-165 mm
• Usage: kirloskar tractor

• Operating Temperature: -20 ° C to +70° C
• Operating Voltage: 9V to 36VDC
• Probe Length: up to 450 mm
• Fuel Measurement Resolution: 0.3mm
• Probe Diameter: 22 mm
• Probe Material: Aluminium
• Dead Band: 10mm from the probe tip
• Housing: Aluminium
• Termination: 4 core extendable cable from the electronics
• Communication Interface: MODBUS RS485
• Mounting: 6-Bolt flange mount

• Material: Metal
• Warranty: 6 Months
• Accuracy: 100%
• Quality: Superior
• Condition: New
• Use: To Check Levels

With the incessant care of our qualified workforces, we are indulged in awarding a varied amassing of fuel sensor these products are treasured for their limitless concert. Some of the noticeable stuffs of these fuel sensors are its lifelong feature and asset. Following the precise stresses of consumers, we offer these fuel sensors in numerous models. Fuel level sensor enables us to avoid situation like site being down due to dg couldn’t run! fuel was low! with continuous fuel level sensing, you will have enough time to refill and avoid being in that type of putdown condition. Fuel consumption can be monitored with its change in level with dg run, also the fuel theft can be stopped at some extend. With fuel level monitoring you will have proper accounting of fuel refill, fuel consumption and dg set performance. You will also have got to know about that extra amount of fuel getting disappear everyday without any accounting! the benefits ¾ timely information of top up & drain ¾ daily fuel consumption analysis ¾ fuel theft can be ceased ¾ it also helps to avoid situations like site down due to low fuel in dg features: longer service life quality-tested flawless finish

SFL-02 is a LED based Fuel Indicator designed using advanced automotive grade components. It can be deployed on any stationary or mobile fuel tank level measurement. The system provides Fuel Level Indication on Circular LED bar. SFL-02 can directly replace the analogue fuel gauge without changing the panel cut out or wiring. SFL-02 is a LED based Fuel Indicator designed using advanced automotive grade components. It can be deployed on any stationary or mobile fuel tank level measurement. The system provides Fuel Level Indication on Circular LED bar.

To satisfy the variegated needs of the customers, we offer Vehicle Fuel Sensor. We make available Vehicle Fuel Sensor that is reckoned for its optimum performance and reliable operation. We offer Vehicle Fuel Sensor that is reasonably priced. Besides, we are a well-acclaimed Supplier of Vehicle Fuel Sensor.

• Type: Analog
• Usage: Liquid Level Measurement

• Brand: Ligo
• Type: Capacitive Fuel Sensor
• Accuracy: 99.5%
• IP Protection Class: IP57
• Housing Material: Stainless Steel
• Suitable Media: Liquid
• Model Number: SP-AF
• Flange Material: Aluminum
• Features: High accuracy , Automatically recognizes new length after being cut, Quick installation.