Gas Blower Dealers

• Automation Grade: Manual
• Feature: Explosion Proof, Rugged Design

Bio gas blowers are generally compressor embedded in biogas lines to boost the gas pressure to meet the burner input demand. It is equipped with all the tools to allow the bio gas plant run under all circumstances. We are Super combustion technologies, the company which continuously manufacturers and supplies the Bio gas blower to meet the clients’ demand.

• Displacement: 27.2 cm3
• Weight: 3.6 kg*
• Sound Pressure Level: 92 dB(A)
• Sound Pressure Level: 105 dB(A)
• Vibration Level Right**: 10.5 Ms2
• Air Throughput***: 700m3/h
• Max. Air Throughput***: 700m3/h
• Air Speed***: 71m/s

Nominal data Type R2E190-AO26-05 Motor M2E068-BF Phase 1~ 1~ Nominal voltage VAC 230 230 Frequency Hz 50 60 Method of obtaining data fa fa Valid for approval/standard CE CE Speed (rpm) min-1 2500 2700 Power consumption W 58 75 Current draw A 0.26 0.34 Capacitor µF 2 2 Capacitor voltage VDB 400 400 Capacitor standard S0 (CE) S0 (CE) Min. back pressure Pa 0 0 Min. back pressure inH2O 0 0 Min. ambient temperature °C -25 -25 Max. ambient temperature °C 50 55 Starting current A 0.40 0.41 

Prominent & Leading Manufacturer from Noida, we offer Process Gas Blower and Rotary Gas Blower and Sliding Vane Compressors. Product Details: Brand Swam Max CFM As per the requirement of customer Body Material As per the requirement of customer In order to cater the variegated demands of our precious clients, we are manufacturing and exporting a wide range of Process Gas Blower.

Gas Blowers can be defined as special blower types, where the compression chamber is separated from the gear and bearing chambers. This helps in preventing bearing damages, related with corrosive gas. You can avail these blowers in water cooled segments, where the pressure is not more than 7000 mmWG (0.7 Kgcm2).

• MOC: SG iron, Xylene plating
• Duty: Continuous Duty
• Footprint: Small footprint
• Gas Handeled: LPG,PNG,Biogas

Gas Blowers are available in TWIN LOBE construc)on with wide range of models to choose as per applica)on and capacity requirements. Capacity - From 15 m3/hr to 10000 m3/hr Pressure Range - from 100 mbar to 1000 mbar.. Unique Features- • Non pulsa)ng Oil free Gas Delivery. • Air cooled design. • Suitable for Con)nuous Duty. • Improved Volume Efficiency. • Lobe with integral sha8 for be9er performance. • PTFE strips on rotor lobe to minimize back flow /Slip. • Small foot print. Material Of Construc)on- • Sha8 Integral Lobes— SG Iron / SS304/SS316. • Casing - CI FG360 / SS304 /SS316. • Gear - Spur type En353 • Turned Parts - En 8 • Accessories - M.S Fabricated & Epoxy painted/Powder Coated. Special XYLON Coating on Lobes & Casing Gas blowers are used as Booster to convey the Gas at raised Pressure to - ¨ Genset— For Power Genera)on. ¨ Gas Balloon—To inflate and store the Gas. ¨ Gas Burner— To Flare the Gas. ¨ Inert Gas cleaning.

• Type: Gas Blower
• Application: Industrial
• Color: Grey
• Material: Mild Steel

• Pressure :: 2” WC to 25” WC
• CAPACITY:: 500 CFM to 50000 CFM
• Brand Name: FIBROTECHNIKS

We are offering diverse range of gas blowers with following specification: capacity : 500 cfm to 50000 cfm. we design gas blower as per client's requirement. We manufacture and supply complete air exhaust blower unit after testing. these gas blowers are manufactured in pp+frp/pph+frp/pvc+frp/pvdf+frp/frp/frv/grp etc. our impellers are dynamically balanced as per is standards. Impellers are fabricated in pp or frp. impellers are fabricated in clockwise and anti-clockwise directions as per the client's requirements. pressure and type of gas blowers are as follows type : direct drive coupling drive vee belt drive.

Gas Blowers are used for boosting and conveying the gas. Gas is sucked from the system and delivered to the desired destination against the system pressure. For Gas Blower one has to consider the characteristic, nature of gas, chemical composition, temperature etc., before selecting the blower.

Gastight bare shaft machines and custom packages. Click Here To View More Detail

• Type: Gas Blower
• Application: Industrial
• Color: Grey, Grey
• Condition: New
• Automatic Grade: Semi Automatic

• Voltage Range: 115VAC, 230VAC, 24VDC
• Frequency: 50/60 Hz
• Air Volume: 50-1,500 m3/h
• Power Input: 20-820 W
• Back Pressure: up to 4,000 Pa

• Type: Gas Blower
• Condition: New
• Color: Blue
• Max CFM: 5000
• Flow Rate: NA
• Feature: Highly Efficient

• Features: 100% oil free air delivery, High efficiency twin-lobe rotor, low pulsation, and quiet running, Low vibration, Improved volumetric efficiency and reduced operating temp.

• Type: Gas Blower
• Application: Industrial
• Color: Grey
• Condition: New
• Automatic Grade: Semi Automatic
• Driven Type: Electric

Centrifugal Blowers can be accessible in standard and variable width of impellers. TRIMECH success is based upon our skill, High degree of flexibility, exceptional product range and a Strong pledge to Quality Assurance.

We offer gas blowers. Bio gas blowers, based on Positive Displacement Rotary Air Blower principle, have been specially developed for pumping of biogas. These gas blowers are generally used in biogas lines to boost the gas pressures to meet the burner input demand. These gas blowers are generally vertical in construction, that is suction top and discharge bottom, so as to prevent any accumulation of corrosive matter inside the casing. Since they operate in closed loop, suction and discharge silencers are generally not required. Special material of construction, lubrication and sealing arrangements make them ideal choice for biogas applications.

Gas Blowers are used for boosting and conveying the gas. Gas is sucked from the system and delivered to the desired destination against the system pressure. For Gas Blower one has to consider the characteristic, nature of gas, chemical composition, temperature etc., before selecting the blower.

Gas Blowers can be defined as special blower types, where the compression chamber is separated from the gear and bearing chambers. This helps in preventing bearing damages, related with corrosive gas. You can avail these blowers in water cooled segments, where the pressure is not more than 7000 mmWG (0.7 Kgcm2).

We offer Centrifugal Blowers for handling corrosive hazardous gases application like Wet Chlorine, HF, Acetylene, Hydrogen & Sniff Gases of capacity 300 to 3000 cu.m hr. Our Centrifugal Blowers are made from Titanium, Hastelloy-C, SS 316L for Impeller & Casing with Air and water for seal cooling.

We are renowned supplier of Biogas Blower of premium quality. These blowers are widely used in sewage treatment plants, water treatment plant, fertilizers, grain, sugar industries, gas boosting, liquid agitation and sewage disposal etc.Offered product is appreciated for its durability, energy conserving, stable performance, low noise and high efficiency. These blowers are in high demand nationwide. Biogas Blowers have been specially developed for pumping of biogas. Gas is sucked from the system and delivered to the desired destination against the system pressure. These are generally used in biogas lines to boost the gas pressures to meet the system input demand. Special material of construction, lubrication and sealing arrangements make them ideal choice for biogas applications. For inflammable and toxic gases leak tightness is ensured. For Gas Blower selection one has to consider the characteristic, nature of gas, composition, temperature, required gas flow rate & pressure etc. Motor can be sized accurately to pressure requirements.

Using cogeneration to produce hot water for heating systems is widespread in all of India. Since the demand for heating varies according to the seasons, a cogeneration systems would not be profitable if heat generated by the cogeneration modules were not used in the summer. In summer, what really needed is cold water for air conditioning, and this is usually obtained by means of high power-consuming refrigerating compressors.

• Certification: CE Certified
• Condition: New
• Automatic Grade: Semi Automatic
• Features:: Lightweight ,Perfect finish ,Flawless finish

Gas blowers are used for boosting of Bio gas, Nitrogen, Flue gas , Co2 gas and many more. These blowers are suitable for pressure from0.1 kg/cm2 to 1 kg/ cm2. Biogas Blowers generally used in biogas lines to boost the gas pressures to meet the burner input demand. These are generally vertical in construction, that is suction top and discharge bottom, so as to prevent any accumulation of corrosive matter inside the casing. Since they operate in closed loop, suction and discharge silences are generally not required. Special material of construction , lubrication and sealing arrangements make them ideal chice for biogas applications.