Gas Cutting Hose Pipe Dealers

When Welding, heating & cutting operations are done with oxygen acetylene flame, the gases are carried to the required equipment from different gas storage and cylinders with the help of rubber hose. The hose used should be light as in consistent with strength and durability and it must be nonporous to prevent loss of valuable gases.

• Material: Rubber
• Working Pressure: -5 to + 70 Degree Celsius
• Usage: Gas
• Color: Blue, Red
• Pay Mode Terms: T/T (Bank Transfer)
• Size: 1/2 inch, 8mm Id
• Single Hose Length: 100mtr, 6m-12m

• Country of Origin: India
• Shape: Round
• Finishing: Coated
• Thickness (mm): 10mm
• Usage: Industrial Use
• Specialities: Scratch Proof, Perfect Finish, Optimum Performance, Easy To Use
• Size (Inches): 2 Inch
• Hose Length (mm): 5mm

• Type: Welding Rubber Hose
• Brand Name: Oriental
• Material: Rubber
• Certification: IS 447-1988
• Color: Red
• Finishing: Coated
• Packaging Type: Roll
• Pressure: 25.5kgf/cm2
• Outer Diameter: 13.5mm
• Country of Origin: India
• Inner Diameter: 8mm
• Corrosion Resistance: Yes
• Fluid Type: Oxygen / Acetylene Gas
• Usage: Industrial Use
• No. Of Layers: 3 Layer
• Specialities: Durable
• Weight in Kg: 20Kg
• Hose Length (mm): 100mm
• Is It Flexible: Yes
• Hose Lining: Yes
• Reinforcement: Braided/Spiral Plies Of Synthetic Yarn Of High Tenacity.
• Tolerance: 0.75mm
• Working Pressure: 12.75kfg/cm2

• Type: Flexible
• Material: Rubber
• Certification: ISI Certified
• Color: Available in many colors
• Length: 2-5 Meters
• Feature: Good Quality, Heat Resistance, Leak Proof

Gravity offers premium welding & gas cutting hoses featuring a highly flexible & flame resistant tube & cover. These hoses are compatible with common used fuel gases, including acetylene, propane. The synthetic textile braids provides additional resistance & thick cover resist impact from heat, sharp edges & rough treatment.

• Material: rubber and pvc
• Country of Origin: Made in India
• Single Hose Length: 20-25 m
• Diameter: 12 mm

No backfire during cutting because o f "Nozzle-Mix" technology. Aluminium die cast body with ventilation holes reduces overheating of motor and other electrical parts. Unbreakable, smooth and precise horizontal and vertical adjustment of torch. � Bevel setting with locking facility means bevel accuracy during long cutting. Remote mounted gas control knobs make flame adjustment during cutting operation easy. Single lever ON-OFF control for cutting Oxygen makes the stopping and restarting of cutting very easy and saves Oxygen. Stainless steel heat reflectors (2 nos. with air gap), protect the motor from heat during cutting thus adding to the life of the machine. Travels on standard 1.8 mtr extruded Aluminum rai

• Color: Red and Blue
• Packaging Type: Box
• Working Pressure: 25 Kg/sqcm
• Usage: Gas
• Size/Diameter: 8 mm

• Head: 90°
• Nozzle for Propane: PNME

Under the strict supervision of our experienced professionals, we are offering an innovative collection of NM Gas Cutting Blow Pipe. Our offered range is availed in a variety of sizes, dimensions and other such specifications to choose from. The offered range is precisely designed at our highly advanced manufacturing unit following industry defined guidelines. The offered range can also be availed from us at the industry leading prices.

Used to carry gases from cylinders to their place of use. ISI approved. Highly durable. Non-porous which prevents loss of valuable gas. Separate hose is available for LPG and Oxygen gas and the same should not be interchanged. ARCON also provides dual hose pipe where both LPG hose pipe and oxygen hose pipe are joined together using special material. This reduces the effort of the personnel to carry two separate hose pipes for two gases. Also eliminates the kink problem.

• Size/Diameter: 8 mm
• Material: Rubber
• Color: Blue and Red
• Country of Origin: Made in India
• Usage/Application: Gas Welding Cutting
• Length: 20-25 m
• Temperature: -10 to 90 Degree C

• Material: Rubber
• Country of Origin: Made in India
• Color: Blue and Red
• Size/Diameter: 8 mm
• Length: 20-25 m
• Temperature: -10 to 90 Degree C

The Gravity Range of welding hose pipe has been specifically designed for the Indian market. The hoses conform to pressure & tensile load requirements as laid down in BIS 447 for welding, cutting & allied processes.It is important to use the correct type of hose for the required gas to be used. Pressure drops will occur through hoses therefore allowances made to compensate for this when setting up equipment and adjusting requirements.

The delivery pressure of our hose is remarkably stable inspite of changes in flow rate temperature and other conditions. They are rugged in design and are very safe both of which are important aspects for superior performance.It is hazardous to interchange acetylene hose or use other types of welding hose for LPG. LPG being Liquefied Petroleum Gas has corrosive action which dissolves interior of lining & this mixture would retard flame temperature and produce inferior cut. Also in extreme cases it could lead to explosion & serious fire.

• Temperature range: (-) 20° C to (+) 70° C

The Welding Hose Pipe as Suraksha manufacturer, exporters and suppliers. These are suited for Gas Cutting and Welding at any site. These are superior rubber welding hose. Meets or exceed IS 447 BS EN 559, Application: Rubber Hose for welding, cutting and allied Processes. Media: Oxygen Acetylene LPG other fuel gases. Inner tube: Gas-Oil resistant synthetic rubber. Reinforcement: Single layer braid high tensile steel wire hose. Outer cover: Weather Ozone Abrasion resistant synthetic rubber (Red-Blue-Green in colour), Temperature range: (-) 20° C to (+) 70° C, Colour: Red colour hose is used for Acetylene or other fuel gases, Blue and Green colour hose for Oxygen.

RealOn welding hose meets all requirements for welding, brazing and cutting operations including oxygen & Acetylene welding by hand & machine. It is also used for other non-combustible gases. RealOn Red welding hose is used for acetylene application while blue hose is used for oxygen and other non-combustible gases

Gas cutting hose pipe, Double Gauge Oxygen Pressure Regulator, Double Gauge DA Pressure Regulator, Gas Cutter (standard Length).

GAS CUTTING HOSE PIPE, Bow Shackle, Full Body Harness

GAS CUTTING HOSE PIPE, disposable earplug, Drill Pipe, valve lubricants