Gas Fired Heater Dealers

• Type: Gas Water Heaters
• Color: Blue, White
• Condition: New
• Application: Bathrooms, Kitchen
• Automatic Grade: Automatic
• Feature: Corrosion Proof, Easy To Install, Instant Heating Process, Low Power Consumption
• Energy source: Gas

Quick hot water supply With advanced design get high heat transfer rate which provides you hot water in just few minutes.  Superior Quality Insulation Milcent's gas fired water heater is provided with superior quality glass wood insulation. This helps in keeping water warm for 8 to 10 hours. Chrome Plated Highly Efficient Burner Milcent’s gas fired water heater imported chrome plated highly efficient sandwich burner, which provides uniform & efficient flame at low cost of fuel. Auto start and Auto stop With auto start & Auto stop feature, main burner is ignited immediately. once water temperature falls below preset level of temperature and shuts off as soon as the desired temperature is reached. Advanced safety Gas cut - off feature Gas supply is cut off immediately if the pilot flame is extinguished either by operator or by accident. Built in pressure Regulator Milcent’s Gas fired water heater comes with built in gas pressure regulator which ensures uniform gas flow under all conditions. High Temperature Resistant Inner Coating High temperature resistent inner coating ensures coating lasts for years which presents corrosion & gives heater longer operational life. Available in Various capacity As per your requirement you can opt from optimum size from 50 liter to 1000 liter capacity. Available in various gas As per your requirement you can opt from LPG/PNG models.

We are offering natural gas fired thermic fluid heater. Backed by diligent team of personnel and years of experience, we are able to manufacture and supply a wide assortment of natural gas fired thermic fluid heater.

ENERGYPACK gas fired thermic fluid heater are designed with unique liquid sealing arrangement to prevent oxidation of thermic oil, which increase the life of oil. Gas fired thermic fluid heater are fabricated in both vertical & horizontal design as per the client requirement & availability of space. Standard Operating Temperature up to 300 C.

• Type: Gas Fired Heater
• Material: Stainless Steel
• Application: Industrial
• Motor Power: 6-9Hp
• Features: Durable, Easy Installation
• Temperature: 100-150°C

• Approx Price: Rs 3.25 Lakh / Unit

Our Gas Fired Thermic Fluid Heaters are built to last long. We always remain concerned about delivering a flawless range of products and thus we store the entire lot under secured environment till the final dispatch of the orders. Customers are free to place small as well as bulk orders, timely deliveries of the same are our topmost priority.

The company is a major Manufacturer, Exporter and Supplier of Domestic Gas Fired Water Heater. Domestic Gas Fired Water Heater offered by us is of very good quality which involves less maintenance cost. The company manufactures Domestic Gas Fired Water Heater using high-grade raw-material which speaks for the durability of machine. Domestic Gas Fired Water Heater is efficient in boiling water in very short span of time. We offer Domestic Gas Fired Water Heater at reasonable prices Highlights Cost-effectiveDurableSuperior quality Salient Features Imported, highly sensitive, quick-acting thermostat starts heating water quickly.The flue baffle maximizes heat absorption in the Flue Tube; by minimizing air movement in the heater.Pilot burner ignites main burner once water temperature falls below preset level and shuts it off, as soon as the desired temperature is reached.Imported energy saving gas controls and cutoff mechanisms ensure absolute safety.Fully Automatic Control Shuts Off the Valve, once the Pilot Burner is off either by operator or by accident.Three convenient thermostat settings at your finger tips ( warm, Hot and very Hot ).Accordingly, you get water at the preset temperature throughout the 24 hrs. a day. No need to fire or extinguish the burner.Simple robust construction using heavy gauge steel tanks for longer life.Hand-hole clean-out door makes internal cleaning very simple and easy.No need of any hazardous electrical controls.Specially selected energy efficient thermal insulation significantly minimizing losses

• Type: Thermic Fluid Heater
• Application: Industrial
• Material: Mild Steel, Stainless Steel
• Brand Name: Avon Engineering
• Driven Type: Electric
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Motor Power: 1-3Hp, 3-6Hp

Specification Rapid heat transfer with fluid Powered by efficient gas source Durable construction for lasting use Precise temperature control Introducing our state-of-the-art Gas Fired Thermic Fluid Heater – an embodiment of innovation in industrial heating solutions. This advanced heater redefines heat transfer, offering a seamless fusion of speed, efficiency, durability, and precise temperature control for a wide range of industrial applications.   Key Features:   Rapid Heat Transfer with Fluid: Experience the efficiency of quick and uniform heat transfer using thermic fluid with our Gas Fired Thermic Fluid Heater. It adeptly converts gas into heat, ensuring rapid and reliable heat exchange for various operational needs.   Powered by Efficient Gas Source: Embrace the efficiency of gas as an energy source. Our heater taps into this reliable fuel type, providing a continuous and dependable heat source for diverse applications.   Durable Construction for Lasting Use: Designed with longevity in mind, our heater features robust construction that can withstand the demands of industrial environments. Its sturdy build guarantees consistent performance and reliability over time.   Precise Temperature Control: Achieve accurate temperature control within your processes with our Gas Fired Thermic Fluid Heater. Its advanced control systems enable you to maintain the desired temperature ranges, crucial for applications requiring specific heat levels.   Experience Cutting-Edge Heat Transfer: Our Gas Fired Thermic Fluid Heater introduces a new realm of industrial heating. Whether for manufacturing, chemical processing, or other sectors, this advanced heater delivers reliable, efficient, and precise heat transfer, optimizing your processes. It integrates technology, efficiency, durability, and precision, offering a forward-focused solution that aligns with your energy and operational goals. Elevate your heat transfer processes and invest in a product that ensures exceptional performance. Embrace a new era of heat exchange with our state-of-the-art Gas Fired Thermic Fluid Heater.  

We are recognized among the major Oil And Gas Fired Thermal Fluid Heater Manufacturers in India. The Oil and Gas Fired Thermal Fluid Heaters offered by us are accessible in vertical and horizontal types. They have the burner control of Single Stage, Two Stage, and Step Less Modulating.   Advantages of our Oil and Gas Fired Thermal Fluid Heater :-   Fully automatic operation Larger heating surface enables high thermal efficiency Clean and smokeless combustion Noise less operation No explosion hazards   Specifications of Oil and Gas Fired Thermal Fluid Heater:-   Available in 25,000 kcal/Hr. to 400,000 kcal/Hr. Temperature Range 300°C, 340°C and 340°C

Purchase energy efficient Gas Fired Heater with three most convenient thermostat setting including warm, hot and very hot water options. Our energy saving gas controls and cut off mechanisms that we have designed ensures absolute safety. Our extremely advanced mechanism in our product enables it to provide pre-set temperature water. We are proud manufacturers and suppliers of such sturdy constructed Gas Fired Heaters from Anand, Gujarat. Our products inner tank has anti-corrosion coating while our superior fabrication ensures excellent service life.   Salient Features : lightely energy efficient thermal insulation Significantly minimizes losses. The flue battle maximizes heat absorption in theFlue Tube by minimizing air movement in the heater. Fully automatic control shuts of the gas, once the pilot burner is extinguished either by operator or by accident. Imported energy saving gas controls and cut - off mechanisms ensure absolute safety. Three convenient thermostat setting at your fingertips (Warm,Hot and Very Hot). Accordingly, you get water at pre-set temperature throughout 2 hrs. a day. No need to fire or extinguish the burner. Simple robust construction using heavy gauge steel tanks for longer life. The size of water connection provided ensures full - iiovv delivery to the fixture. No need of any hazardous electrical controls. Inner tank is coated with anti corrosive paint.

We are one of the leading Manufacturers, Exporters and Suppliers of Oil/Gas Fired Thermic Fluid Heater. All critical components that are incorporated for manufacturing Oil/Gas Fired Thermic Fluid Heater result in smooth, trouble free performance. Our clients highly depend on our Oil/Gas Fired Thermic Fluid Heater for its maximum operational feature. The Oil/Gas Fired Thermic Fluid Heater, offered by us, is widely used in industries such as textile, chemical, paint, automotive, oil & dairy etc.Attributes : Maximum running reliability Easy maintenance Air preheating Robust design & compact in size Versatile

Description Thermic fluid (hot oil) heaters are used in many industrial applications where efficiency and accurate temperature control between 100 ° C and 350 ° C are required. They work in a way of heating directly Thermic fluid in the pipes with the high temperature smoke. With the help of forced circulation oil pumps, the fluid with low temperature will come back to the heater from the heat-required equipments (like dryers) and is re-heated again. The shell plate is made of Q235-A/B steel plate. The outside insulation is aluminium silicate fibrofelt with thickness of 150mm. The heater is packed by 0.5mm stainless steel sheet. OLYMSPAN has many years experience in this field and we offer can a broad range of products, service and support. Product Features · High thermal efficiency, unique structure, general thermal efficiency can reach 90%.· The proprietary combustion technology and the structure of heating coiler can absolutely avoid the overheat And damage of coilers in common use conditions.· The top of inner coiler is designed into cone-shape, which can prevent the casting material on the top fall off In high temperature.· When abnormal conditions happen, safety interlock system starts up to protect the boiler.· Accurate temperature control. The oil temperature in the outlet can be controlled within ± 1 ° C.· The compact structure can cover a small working area.· Easy to install, operate and maintain.

Direct Oil / Gas Fired water heaters are the best solution where fuel fired hot water system can be used. Wide range output can be achieved in this water heaters. Fully automatic burners are used for safe operation.Advantages : Efficiency is maintained throughout the range of load.Even at part load all energy is converted into heat Space requirements are minimum Separate boiler not required Installation is simplified The calorifier can be installed with minimum electric load Maintenance is kept to a minimum. Low nox burners are used Fuel efficient burners are used. Diesel oil, Natural Gas, LPG and Propane can be used Can also be used with solar or heat pump system where oil or gas fired system can be considered as a backup Water heaters are fitted with removable type fire tube heat exchanger. These heat exchangers are made of carbon steel tubes and coated with specially formulated coating material to withstand high temperature.BurnerMono block pressure jet fully automatic oil / gas fired burners are used to heat the water. Depend on recovery, burners can be selected either on / off type or full modulation type. Burners will be highlyfuel efficient and with low nox capabilities.Gas Fired Burner : Energy Saving and compatible with environmental requirements Quiet in operation and designed for easy maintenance Designed and approvaed in accordance with the European Standard EN676 Plug – in contact facilities the installation Hinged flange Designed for one stage, two stage, or modulating operation Available for natural gas, LPG, town gas, biogas    .Oil Fired Burner : Energy Saving and compatible with environmental requirements Quiet in operation and designed for easy maintenance Reliable and trouble – free Designed and approved in accordance with the European Standard EN267 Suitable for high resistance boilers Industry standard components easily available Designed for on / off and high/low operation Plug-in contact facilities the installation With hydraulic air adjustment Fuel – Light distllate oil Class D (1.5-5.5 cSt@40°C)

Direct Oil / Gas Fired water heaters are the best solution where fuel fired hot water system can be used. Wide range output can be achieved in this water heaters. Fully automatic burners are used for safe operation. Advantages Efficiency is maintained throughout the range of load.Even at part load all energy is converted into heat. Space requirements are minimum. Separate boiler not required. Installation is simplified. The calorifier can be installed with minimum electric load. Maintenance is kept to a minimum. Low nox burners are used. Fuel efficient burners are used. Diesel oil, Natural Gas, LPG and Propane can be used. Can also be used with solar or heat pump system where oil or gas fired system can be considered as a backup. Water heaters are fitted with removable type fire tube heat exchanger. These heat exchangers are made of carbon steel tubes and coated with specially formulated coating material to withstand high temperature. Burner Mono block pressure jet fully automatic oil / gas fired burners are used to heat the water. Depend on recovery, burners can be selected either on / off type or full modulation type. Burners will be highlyfuel efficient and with low nox capabilities. Gas Fired Burner Energy Saving and compatible with environmental requirements Quiet in operation and designed for easy maintenance Designed and approvaed in accordance with the European Standard EN676 Plug – in contact facilities the installation Hinged flange Designed for one stage, two stage, or modulating operation Available for natural gas, LPG, town gas, biogas . Oil Fired Burner Energy Saving and compatible with environmental requirements Quiet in operation and designed for easy maintenance Reliable and trouble – free Designed and approved in accordance with the European Standard EN267 Suitable for high resistance boilers Industry standard components easily available Designed for on / off and high/low operation Plug-in contact facilities the installation With hydraulic air adjustment Fuel – Light distllate oil Class D (1.5-5.5 cSt@40°C)

Grand Prix offers Indirect Water Bath Heaters for indirect heating of Crude Oil & Hydrocarbons by using Gas Fired Burners having a max capacity of 10 MMBTUHr.

• Material: SS, MS
• Application: Industrial
• Brand: Thermotech
• Surface: Galvanized
• Efficiency: 92%

We are recognized among the major Oil and Gas Fired Thermal Fluid Heater Manufacturers in India. The Oil and Gas Fired Thermal Fluid Heaters offered by us are accessible in vertical and horizontal types. They have the burner control of Single Stage, Two Stage, and Step Less Modulating.   Advantages of our Oil and Gas Fired Thermal Fluid Heater :-   Fully automatic operation Larger heating surface enables high thermal efficiency Clean and smokeless combustion Noise less operation No explosion hazards   Specifications of Oil and Gas Fired Thermal Fluid Heater:-   Available in 25,000 kcal/Hr. to 400,000 kcal/Hr. Temperature Range 300°C, 340°C and 340°C

We offer gas fired vertical thermic fluid heater. In recent times, thermic fluid heaters have found wide applications for indirect process heating. Employing petroleum - based fluids as the heat transfer medium, these heaters provide constantly maintainable temperatures for the user equipments. The combustion system comprises of a fixed grate with mechanical draft arrangements. we manufacture and supply best quality oil/gas fired vertical thermic fluid heaters that are extensively used in several industries. These oil/gas fired vertical thermic fluid heaters are available with high operating temperatures (up to 300°c) with low system pressure. In diffrent fuels like f.o./ l.d.d./ h.s.d./gas/ diesel. Etc. range of. 25,000 kcal/hr to 15,00,000 kcal/hr. Fully automatic operation larger heating surface enables high thermal efficiency clean and smokeless combustion noise less operation no explosion hazards

We offer Oil Gas Fired Thermic Fluid Heater. Capacity from 50, 000 Kcalhr. To 80, 00,000 K calhr. VerticalHorizontal furnace Oil, LDO, HSD, Natural Gas, LPG Features » Heatex Oil-Fired Thermic Fluid Heater is horizontalvertical cylindrical design. » The Burner assembly is designed for easy adjustment, cleaning & maintenance of diffuser plate, nozzle electrode etc. For long term cleaning of coil, it is quite convenient to take out the coil as it is horizontally designed. » It is a three pass coil forced draft Thermic Fluid Heater.

• Feature: Low maintenance , Efficiency of heat transfer, No scale problems, No boiler regulation.
• Tank Orientation: Horizontal
• Usage: Industrial
•  :  

We are Leading Manufacturer, Supplier, Dealer & Exporter of Gas Fired Thermic Fluid Boiler. We supply an exclusive range of the finest quality Gas Fired Thermic Fluid Heater.

At high temperature, water and steam requires a corresponding high operating pressure. Establishing this with water and steam can be very controversial and expensive. In thermic fluid heaters a special oil is used instead as the heat carrier, operating at atmospheric pressure up to 300°C. Compared to water and steam, it would require a pressure of 85 bar to obtain this temperature. There are several advantages of using thermic fluid heaters compared to steam boilers. The most obvious are : High temperature upto 300°C at atmospheric pressure. No equipment for pre-treatment of boiler feed water. No heat loss due to hot condensate and flash steam. No risk of corrosion. Low maintenance costs. Easy to operate ( does not require a steam boiler certified operator).   The Alfa thermic fluid heaters are thermodynamically optimized & are characterized by high efficiency & excellent heat transfer to the thermic fluid. The combustion chambers are generously dimensioned & are sufficiently long. The flame can thus burn fully & the emission values remain very low for all fuel types.Competitive Advantages of the productAlfa has the following distinct advantages Large heating surface area hence higher efficiency Hinged front door for easy cleaning & inspection Rugged construction Maximum running reliability

Product Description :   The high performance Aero Therm Thermic fluid heater built with following safeties:    » Circulating pump motor interlock.  » Low level in expansion tank.  » Low fuel oil temperature (F.O. fired only).  » 2 Nos. of reassure switch for no flow/low flow.  » High thermic fluid temperature.  » Flame monitor by photocell (LDR). Salient Features:    » Coil from Seamless ASTMA 106 GR-B Pipes.  » Independent Drive for Fuel Pump 1440 RPM.  » No Scale Formation.  » Easy & Economical Operation.  » Outside purview of IBR. Details require for quotation:    » Capacity in KCAL/HR.  » Temperature in Deg. C.  » Type of Fuel in Light Diesel Oil / Furnace Oil / L.P.G. / Natural Gas.