Gas Monitors Dealers

• Brand Name: Optima
• Gas Type: Natural Gas
• Display Type: Digital
• Power Source: Battery
• No of Channel: 6 Channels

• Display: 3 ½ digits – 12 mm high LCD. With backlight and switch
• Gas: Any one gasz as per table.
• Range: Any one range as per table.
• Resolution: 0.1 % steps.
• Accuracy: + 2 % FSD at constant temperature
• Repeatability: 1 % of range.
• Response: 90% in 20 seconds.
• Sensor type: Non-Dispersive Infra-Red
• Working temp: 5° – 45°C
• Relative humidity: 0-95 % non-condensing.
• Sampling method: By using in-built pump
• Sampling: Intermittent spot checking
• Pump suction: > 4 hg Column
• Pump Flow: 1 liter per minute
• Flow Indicator: Provided. 0 ??3 l/m
• Calibration: With certified calibration gas.Low Battery ; Low battery alarm provided.
• Power standard: 12 V Rechargeable battery
• Size (+ 12 mm): 21cm x 21cm x 8cm deep
• Weight: 2 kg ( + 250 gm)
• Housing body: Aluminum
• Battery Charged: On 220V AC mains through adaptor.

• Type: Automatic
• Voltage: 220V
• Frequency: 50HZ
• Warranty: 1 Year
• Connectivity: Wired, Wireless
• Data Storage Capacity: 1tb, 4tb
• Accuracy: 100%

The check on quality has been kept by our experts who ensure that the inputs we source are free from any sort of impurities. Thus, we ensure quality products at buyer's end. We are the most promising name when it comes to Ammonia Gas Leak Detector.

• Color: White
• Condition: New
• Application: Stack Monitoring
• Feature: Accuracy, Easy To Fit, Measure Fast Reading, Robust Construction
• Display Type: Digital
• Temperature Range: Thermocouple, 1200°C
• Accuracy: ±2% F.S
• Signal Output: 3 x 4-20mA, isolation 1 x MODBUS RS485 (Optional) 1 x MODBUS RS232 (Optional)
• Purge: Auto Purging

Introduction:The PTV-91 Module is a new generation of the Online emission Monitoring instrument, which can monitor the Temperature, Pressure, Velocity/Flow rate of Flue Gas in various typical applications in a long time under severe conditions. These are very crucial parameters to calculate the pollutant emission in the OCEMS. PTV-91 has Low/high precision micro Differential Pressure/Static Pressure Sensor with the equipped blowback unit. Compared with conventional integrated monitor, it can measure Pressure Value also. TFT WQVGA Color Graphical display measure data and signal, convenient reading and debugging; smaller size ensures convenient moving, installation and maintenance.Application:Measures Velocity, Temperature, Pressure, Flow of high Temperature, Humidity and dusty gas in a variety of boiler, furnace flue and mine exhaust pipes.Features: Ultra-high-precision pressure sensor achieves the measurement of low-flow (2m/s). Optional: TFT color display operating unit for good human-machine interaction interface. Timing of back blow, velocity field parameters Pitot tube coefficient and stack radius can be set. Overvoltage protection effectively avoids pressure sensor being damaged and reducing operating cost. Strengthen output signal protection

Model 2620 single channel digital control modules are designed to supervise and display the status of a single integral or remote (2620 R) sensor assembly. Model 2620 is housed in a NEMA AX wall mount enclosure or Ex- proof enclosure. Model 2620R Single Channel controllers interface with industry standard two or three wire 4-20 mA sensor or other standard voltage / current sensor transmitters and provide the user with concentration display and two independent adjustable alarm levels. The 3 J4 digit LCD or Alphanumeric LCD display can read the concentration. LEDs on the front panel provide indication of all three alarms. The alarm relays can be programmed to be either latching or non-latching and to activate either as a rising or failing alarm. The relays are SPDT Form C type rated at 5 Amps, to provide direct alarm action, reducing the need for interposing relays. Local Alarm devices can be connected to the configurable on board alarms. The Fail Safe Supervisory provides a reliable indication that the Monitor is fully operational. I he "hail Safe" design monitors the input power and status of the power supply for the amplifiers. A failure of any one of these functions illuminates a "Fault" Light Emitting Diode. The HEART of any Analytical system is the SENSOR. It is the most critical component in overall system performance. Because no single sensor technology is ideal for all applications, ENDEE offers TEN different sensor technologies. This capability is mandatory in today's complex industrial market. Command of each of these technologies enables us to "FITTHE PRODUCTTO THE APPLICATION", and assure long-term service and reliability & optimal performance in every application. The Monitor is a Single Gas Multi-purpose monitor that combines simplicity and high performance in a low cost low maintenance package. The rugged NEMA 4X or 7X assembly is suitable for a variety of industrial, commercial and general purpose applications to monitor HAZARDOUS,Toxic gases or Oxygen iri Process Fuel Gas or Ambient Air. Fast and accurate response. Long Life Applications Specific Gas Sensor Tech. Solid State Electronics Continuous Monitoring Two Alarm Levels Fail Safe Protection Recorder Output Integra or Remote Sensing Sensor Un-attended Operation Sampling by Diffusion or sample Draw Pump. Flexibility to fit your application needs Interfaces with Industry Standard Transmitters. The HEART of any Analytical system is the SENSOR. It is the most critical component in overall system performance. Because no single sensor technology is ideal for all applications, ENDEE offers TEN different sensor technologies. This capability is mandatory in today's complex industrial market. Command of each of these technologies enables us to "FITTHE PRODUCTTO THE APPLICATION", and assure long-term service and reliability & optimal performance in every application.

AGM 7200 Features Incorporating latest medical gas sensor technology by Dragerwerk AG & Co. KGaA, Germany First indigenously manufactured Anaesthesia Gas Monitor. Continuous & Real time monitoring of 5 Anaesthesia Agents (Isoflurane, Sevoflurane, Enflurane, Desflurane, Halothane), etCO2, Respiration, N2O Display of MAC (Minimum Alveolar Concentration) Operates on Non Dispersive Infra Red technology. 4 models available. Inspiration & end tidal values of all gases (Colour coded as per standards) Sidestream gas measurement with sampling Rate @ 200ml/min Automated Zero Calibration-first zero 35 min after power on, then once every 24 hours Colour TFT Display – 7” with touchscreen. Built-in Rechargeable Battery with battery back-up of more than 2 hours. Ideally suited for Low Flow Anaesthesia in Operation Theatres.

Stack Gas Monitor, Type: SM809 manufactured by Nucleonix Systems, designed using state-of-art electronics is primarily used for monitoring Alpha, Beta activity present in the form of suspended particulate in air and Kr-85 preset in the form of gas. It is very much essential to monitor the quality of air in & around Radiochemical plants, reprocessing plants and other similar facilitates. Usually stack, by pass lines are let into this system & after measurements, it is connected back to stack. It essentially has an air suction system comprising of a suction pump, rotometers to measure air flow rate, beta suction chamber with arrangement for trapping of suspended dust particulate onto the filter paper. An end window GM tube of 1� dia facing the filter paper counts for Beta activity in CPM CPSBq on continuous basis. In addition this system has Alpha air-sampler detector assembly consists of a filter holder 60mm dia, a suction chamber with air inlet and outlet & detector housing fabricated with stainless steel .Alpha Detector consists of ZnS (Ag) deposited on loose mylar support of 50mm dia coupled to matched PMT with Pre-amplifier. Detector Efficiency achieved is of the order of 25% for Plutonium alpha particles over the entire window area.

• Country of Origin: France
• Type: Gas Monitor
• Application: Industrial Use
• Color: Black
• Voltage: 220V
• Condition: New
• Connectivity: Wired, Wireless
• Make: Oldham
• Model: BM25
• HC: 0-100% LEL
• O2: 0-25% Vol.
• CO: 0-2000ppm
• H2S: 0-100ppm
• Sensors: Catalytic, Infrared, Electrochemical, PID
• Battery: Upto 6 days continious running

• Display Type: Analog, Digital
• Brand Name: Drager
• Application: Industrial
• Measurement Range: 100to 1000 ppm
• Installation Type: PARSONAL

• Application: Industrial Use
• Warranty: 1year

A gas monitor is a device used in gas detection systems that monitors and controls the flow of gas through a building or facility. It is typically installed in a central location and connected to gas detectors and alarm points throughout the building to provide a comprehensive gas detection system. The monitor receives signals from gas detectors and activates warning and alarm devices in the event of a gas leak or other gas-related emergency. It may also have built-in functions such as automatic shutoff valves to control the flow of gas and prevent further leaks. Gas Monitor come in various sizes and configurations, depending on the size and complexity of the facility and the types of gases being monitored.  Some control panels are designed to work with specific types of gas detection sensors, while others are more flexible and can be programmed to work with a range of sensors. When selecting a gas monitor, it’s important to consider factors such as the number and types of gas detection sensors required, the size and layout of the facility, and the level of control and feedback required.

Compact, Light Weight Intelligent Unit with Application Specific Sensors Sensitiveto PPB / PPM or % age levels of Gases & Vapors. Complete Automatic Operation. LCD Display Continuous Diffusion / Suction Sampling Confidence Beep every 15 seconds. Complete self Integrity check on start Automatic Calibration. Display of WARN & ALARM Low battery Alarm Intrinsically Safe Automatic Sampling & Analysis for specified periods at preset intervals – Completely Unattended.