Gear Switches Dealers

• Switch Type: Rotary Limit Switch
• Usage: Suitable for Reversing Drives such as Hoists,Cranes,Winches,Rolling Mills,Theatres,Coke Ovens.
• Current Rating: 10 Amps
• Ambient Operating Temperature: -25 Degree Centigrade to 70 Degree Centigrade
• Material: Impact-Proof Thermoplastic and GFN
• Degree of Protection: IP 55,IS 13947 Part I
• Country of Origin: Made in India
• Model Name/Number: FG
• Power/Voltage: Up to 600 V.A.C.
• Warranty: One Year (Condition Apply)
• Shaft Diameter: 12mm
• Make: Powermech,Speedocontrols and Equivalent to other Brand is also Offered.
• No. of Contacts: 2NO 2NC or 4NO 4NC
• Gear Ratio: 1:12.5, 1:25, 1:50, 1:100, 1:200 and 1:400.
• Protection Degree: IP-55 IS : 13947 Part 1
• Mounting Position: All Position Mounting
• Drive: Worm Screw
• Cable Entries: Twin, 3/4 Inch BS Conduit
• Contact Material: Double brake, Silver Cadmium (Snap)
• Wire Connection: Screw Terminal Contact

• Voltage: 450 V
• Current Rating (Amps): 40 Amps
• Power Source: Electric
•  :  

• Warranty: 1 year
• Current Rating: 12 amp
• Switch Type: Gear Limit Switch
• Operating Frequency: 50 Hz
• Power/Voltage: 440 V

Eot Crane Rotary Gear Limit Switch is basically consists of heavy duty worm gear drive. The worm gear unit is built in a cast housing fitted on main body of Limit Switch. The cam shaft which extends from behind the gear in to housing, accommodates the cams adjustable actuators which are fitted on the cams. These actuators strikes the contact finger of respective contacts

• Type: Rotary Gear Limit Switch
• Color: Gery, Blue
• Feature: Easy To Operate, High Performance
• Frequency: 50Hz
• Country of Origin: India
• Current Type: AC

Suni makes Flameproof (FLP/WP )Rotary Gear type Limit Switch that is used on Control / Power circuit of reversing drives so as to limit their rotation / movement within a predetermined position.The Flameproof (FLP/WP) Rotary Limit switch FlameproofTesting as per IS/IEC 60079-1:2007 & Dust ignition protection as per Is/IEC 60079-31:2008 & Weatherproof Testing as per IS/IEC 60529:2001 for IP 66 Enclosue Material is in Die Cast Aluminium Ally LM6 & used in Zone 21, 22 & 1&2, for gas Group-IIA,IIB & IIC atmosphere   The function of the Limit Switch is to stop the mechanism of drive at the extreme clock wise / anti clock wise position. Suni Make Rotary Limit Switches are particularly suited for use on reversing drives such as Electric Hoists, Winches, Over Head Cranes, Traversers etc. The contacts of these Limit Switches are rated for 40 amps at 500 Volts A.C.The Limit Switch can be provided with 2NC contacts or (2No + 2NC) contacts as per the requirement.The geared type rotary limit switch basically consists of heavy duty worm gear drive with a ratio of 48:1 The Crane Duty Rotary Geared Limit Switch is made in IP-66 enclosure.   in case of IP-66, the cover is of cast Aluminum. Also the Base and cover have machined surface to protect the Limit Switch against dust.The cam shaft which extends from behind the gear into the Aluminium housing accommodates the cams.   2 or 4 cams are used depending upon whether the Rotary Limit Switch is of 2 contacts or 4 contacts operation.The contacts have a maximum continuous Current capacity of 40 amps AC.The contact tips are made of high grade Silver Cadmium Oxide alloy.   When used for Series operation [up to 40 Amps maximum], the Contacts are suitable for 720 operations per hour and in case of Shunt operation [ for Control Circuit ] , the Contacts are suitable for 1000 operation per hour.The same Contacts can be used in Series as well as in Shunt configurationsThe switching capacity of the Contacts when used for Shunt operation is 15 amps at 400 Volts, AC on highly inductive load and 2.5 amps at 220 Volts DC.These switching capacities in fact are far in excess of what is actually required in practice and hence replacement of Contacts for Shunt may not be necessary for a long time.The body of the Contacts is made of high grade Melamine which is specifically suited for heavy duty operation .The material is non – tracking and is capable of with standing heavy arcing.The FLP/WP Rotary Limit Switch operates in the following manner:The Mechanism or the Drive coupled to the Limit Switch actuates the Contacts through the Worm Gear Drive and the Cams.When the Mechanism or the Drive approaches the pre determined position, the Cam strikes the Contact finger of the corresponding Contact which in normal condition is in a closed position. This immediately opens the Contacts and the Circuit is broken there by disconnecting the respective Motor from the supply and resulting in the stoppage of the Drive or Mechanism.The Actuator or Cam is provided with a maximum follow-through angle of 60 degrees there by ensuring that the normally closed Contact, which has been opened by the Actuator / Cam, shall remain in the open position for at least 8 full additional revolutions of the Input Shaft.This provision is adequate for most of the Reversing Drives where the Mechanism or Drive comes to a complete stop with in 1/5th of a revolution of the Input Shaft of the limit Switch.In addition to the adjustment provided for the Actuator/Cam a further fine adjustment knurled Screw is provided for each Contact. This adjustment can be locked in position by locking Screws provided with each Contact fitting.

• Product Code: RGLS
• Availability: In stock

Speedage” make Rotary geared type Limit Switches are used on control and power circuit of reversing drives so as to limit their rotation/movement within a predetermined position. The function of the Limit Switch is to stop the mechanism or drive at the extreme forward / reverse position. The limit switches are particularly suited for use on reversing drives such as hoist, winches, rolling mechanisms used in steel plants such as coke ovens, feeding machinery, valve drives etc. The Geared type Rotary Limit Switch basically consists of heavy duty worm gear drive with a ratio of 48:1 or 60:1. the worm gear unit is built in a sturdy cast aluminium housing which is fitted on the main body of the Limit Switch, covered with dust tight gasket in cast aluminium enclosure. The limit switches are made in IP 54 enclosure with cast Aluminium cover duly machined surfaces to protect against dust and dirt.

• Warranty: 1 Year
• Application: Home, Office
• Condition: New
• Power/Voltage (V): 240 V
• Operation: Electric
• Finish: Coated

• Mill Duty MDT: (300mm - 600mm)

Thruster brake is a device to retard the speed of moving machinery and to stop it accurately to the desired position. The braking force is applied to the brake shoes by a pre-stressed compression spring. The shoes press on the rotating brake drum retarding its speed, and finally stopping it. The releasing of the brake and compressing of the spring is done by thruster. Thruster Brake Series - SMD with Eldro, (150mm - 710mm) , Thruster Brake Series - Mill Duty MDT (100mm - 250mm) , Thruster Brake Series - Mill Duty MDT (300mm - 600mm).

• Feature: Heavy duty usage, Better functionality, Superb performance
• Body Material: Cast Iron / Cast Aluminum die cast

• Type: Rotary Gear Limit Switch
• Certification: CE Certified, ISO 9001:2008
• Color: Orange
• Voltage: 380V, 440V
• Frequency: 50Hz
• Current Rating: 15-30Amp

• Type: ROTARY TYPE
• Brand Name: ELECTRO POWER
• Max. Voltage: 440 V
• Mechanical Life: GOOD
• Application: CRANE
• Operating Temperature: 55
• Max. Current: 40 A
• Protection Level: ACCURATE
• Output: GEAR RATIO 48 :1 60:1

We are offering rotary gear limit switch. rotary geared type limit switch is basically consists of heavy duty worm gear drive. The worm gear unit is built in a cast housing fitted on main body of limit switch. The cam shaft which extends from behind the gear in to housing, accommodates the cams adjustable actuators which are fitted on the cams. These actuators strikes the contact finger of respective contacts function : limit switch is to stop the mechanism of drive at the extreme clock wise anti clock wise position. These rotary limit switches are particularly suited for use on reversing drives such as electric hoists, winches, over head cranes, traversers etc. application: rotary geared type limit switches are suitable for use reversing drives such as hoists, winches, rolling mills and various other mechanisms used such used in steel plants such as coke oven, feeding machinery etc. technical data: body material : aluminum die cast degree of protection : ip-55 gear ratios : 1:48, 1:60 drive : worm drive cable entries : 34" conduit contact material : double break silver cadmium rated voltage insulation : 500 v.a.c. thermal test current : 1040 amps. no. Of contacts : 6 maximum cam setting : adjustable contacts : normally open normally close

We are instrumental in manufacturing and exporting world- class Back Gear Switches to the clients. Manufactured using premium grade materials, our Back Gear Switches are high on demand in the automobile industry. As the name suggest, the Back Gear Switches are widely used for back gears in varied vehicles. In addition to this, the clients can obtain the quality-tested Back Gear Switches at most competitive prices in the markets. Attributes Excellent qualityPrecision engineered Reliable performance Durable

• Application: EOT CRANE
• Brand Name: GIOVENZANA
• Thermal Test Current: 10 Amps.
• Rated Voltage Insulation: 500 V.A.C.
• Wire Connection: Screw terminal
• Contact Material: Double break silver cadmium
• Maximum Rotation Speed: 1200 rpm
• Body Material: Black Nylon

• Feature: Futuristic design, High recital, Easy fixture, Rust free

Our geared limit Switches are apt for the usage in  control and power circuit of reversing drives so as to limit their rotation/movement within a predetermined position. The function of the Limit Switch is to stop the mechanism or drive at the extreme forward / reverse position. Our geared limit switches are made in IP 54 enclosure with cast Aluminum cover duly machined surfaces to protect against dust and dirt. They are perfectly suited for reversing drives such as hoist, winches, rolling mechanisms used in steel plants such as coke ovens, feeding machinery, valve drives etc.  

gear switches High quality moulded casing Improved and rugged design of operating mechanism Improved sensitivity for quick operation

• Brand Name: POWERLINE
• Switch Type: Rotary Limit Switch
• Application: Eot Crane
• Make/Brand: Powerline
• Power/Voltage: 440 V
• Crane Type: Eot Crane
• Minimum Order Quantity: 1 Piece

Rotary geared limit switch is used to trip motor supply when the moving loads reach the extreme end positions of working zone. Rotary geared limit switches are suitable for use on reversing drives such as Hoists, winches, rolling mills and various other mechanisms used in steel plants such as coke oven, feeding machinery etc. A two(or more) contact elements are operated by respective rotating cams, suitably adjusted on a cam shaft which rotates with fixed speed ratio of the drive motor shaft. The cams can be steplessly positioned so that they trip motor supply and stop the motion at the set point of travel. The Rotary geared limit switch with IP-44 / IP-54 degree of protection are available in desired NO/NC contacts combinations and specified gear ratios Supplier of Rotary geared limit switch and manufacturer of Rotary geared limit switch. Pethe Industrial Marketing Company Pvt. Ltd. is the leading manufacturer of Rotary geared limit switch in India. Pethe Industrial is the leading supplier of Rotary geared limit switch in Mumbai, Maharashtra, Gujarat, Delhi, and all over India.     Salient Features • Body material is made of Aluminium / CI casting. • Enclosure is of IP-44 / IP-55 degree of protection. • Mounting position is Vertical. • Cable entry is of ¾” conduit • Common Gear ratios are 48:1 & 60:1 • Drive is of worm type. • Rated voltage is 500 V • Thermal test current is 10 Amps • No. of contacts is 2NO or 2 NC adjustable cam setting • Contact material is of silver cadmium. • Any other specification can be manufactured upon request.           Application   • All Material Handling and Lifting Equipments   • Hoisting : electric wire rope Hoists and Crabs   • Cross travel and Long travel : EOT / Gantry / Goliath / Derrick Cranes   • Winches and Conveyors   • Rolling mills   • Sugar, Mining, Cement, Textile industries to name a few.   • Brake motors

Rotary Geared Limit Switch GRLS is used to trip motor supply when the moving load reaches the extreme end positions of working zone. The driving motion is transmitted by worm gear through worm shaft. The rotations and movements are transmitted to switches by adjustable cams. Worm Drive Limit Switch FGLS are suitable for use on reversing drives, such as Hoists, Cranes, Winches, Rolling Mills, Theater Curtains, Coke Oven etc. The driving motion is transmitted by worm gear. All gears and hubs are made of low wear thermoplastic material. The rotational movements are transmitted to switches by adjustable cams. Limit Switch LSR Cross Rotary for travel Motion Operates the control change over the contacts of a motor of a moving equipment which when operates with a load a actuates the 300mm rods of the Limit Switch and this in turn operates the NO/NC change-over contact elements.

• Voltage: 500 V
• Body Material: C.I casting
• Enclosure: IP-44/IP-54
• Mounting Position: Vertical
• Contact Material: Silver Cadmium
• Drive: Worm drive
• Thermal Test Current: 10 Amp

• Body Material: CI Casting (GR 25)
• Gear Material: Nylon 30% Glass
• Worm Material: Nylon 30% Glass
• Gear Ratio: 48:1

Rotary geared type Limit Switches are used on control circuit of reversing drives so as to limit their rotationmovement with pre-determined position. The function of limit switch is to stop the mechanism at extreme forwardreverse position. The limit switches are available in different combinations with totally enclosed in LP-55 degree of protection with N.O. and N.C. contracts combination.

• Brand: Netgear
• Color: Blue
• Voltage: 240 V
• Power Source: Electric
• Model Name/Number: GS106
• Ports: 8

The reverse gear switches are used in transmission equipments to sense the position of reverse gear. These are high precision switches with a durability of 2 million operations with a rated load upto 4 Amps .

• Brand Name: Kalyan Engineers
• Application: This Solenoid switch for automatic gear shifting purpose.
• Current Rating (In Amps): 10A
• Power/Voltage: 12VDC

Rotary Geared Limit Switch GRLS is used to trip motor supply when the moving load reaches the extreme end positions of working zone. The driving motion is transmitted by worm gear through worm shaft. The rotations and movements are transmitted to switches by adjustable cams.

• Switch Type: Key Lock, Rotary Level, Rotary Limit
• Switch Configuration: NC
• Application: Machine Tools
• Brand Name: GIOVENZANA
• Rated Voltage: 240 VAC
• Model No.: FGR series