Geocells Dealers

• Brand Name: Indokon
• Color: Black
• Thickness: 1.2 | 1.5 | 1.65 mm
• Depth: 75 | 100 | 150 | 200 mm
• Weld Space: 356 | 445 | 660 | 712 mm
• Features: Fast and Easy to Install , Easy to Transport , Lightweight
• Applications: Slopes and Embankments, Road and Railways , Landfill and Contaminated Sites

It is a three-dimensional cellular confinement system manufactured by an extrusion process using Polyethylene. These honeycomb-shaped cells are used for erosion protection of slopes, enhancing load carrying capacity of weak soils. The cell walls are permeable to water, air and nutrients with increasing stability and vegetative performance.  

• Color: Grey, etc
• Feature: Preserving the soil structure
• Application: Enabling flow of water, nutrients and soil organisms
• Usage: Preventing run-off and soil erosion
• Advantage: Easy to Operate
• Performance: Optimum

The Geocell slope and shoreline protection system confines. reinforces and restrains the upper soil layer and infill controlling down-slope movement and slippage due to hydrodynamic and gravitational forces. Provides effective slope protection and structural confinement of topsoil/vegetation and granular materials suchas send, gravel and larger rock or stone. Becomes a flexible concrete mat with built-in expansion joints when cells are infilled with concrete. Creates additional stability by integrating tendons on steeper slopes and shoreline embankments or when a geomembrane or hard soil/rock surface prevents anchoring with stakes. Allows embankments to be steeper than when unconfined, reducing use of valuable land space.   Subgrade Preparation Excavate and shape foundation soils. Insatll a geotextile underlayer on prepared surfaces. If required, install geogrid underlayer on prepared Surfaces. Geocell Panel placement and tendon fixing First calculate the length of the slope in order to determine the number of panels required and the length of your tendons. Allow approx. 200 mm for each securing anchor to be tied off plus an additional 1 m per tendon run for anchor placement. The number of securing anchors and tendons used will depend on the gradient of the slope. (i.e the steeper the slope the more anchors and tendons required.) Position collapsed geocell panels at crest of slope. Secure tendons at the crest of the slope with galvanized anchors. Feed the tendon through the first collapsed panel. Secure subsequent panel / s with connecting studs and continue to feed tendon through each individual collapsed panel. Once the tendon has been fed through all panels, fully extend tendon down the slopw Drive a rebar J- Pin trough every perimeter cell along the crest of the slope to secure the top edge of the geocell panels in place.Begin to expand the panels / s down the slope, securing the panels as you go with J-pins (according to suggested laying pattern) in their fully expanded postion. Once the entire matrix has been positioned, return to tendons working from the crest down, drive in anchors tight against the cell walls in line with tendon. Take the slack from the tendon and wrap it aroung the central column 3 or 4 times before repeating the process on the next anchor. Tie off the tendon securely on the last anchor at the bottom of the slop, drive a rebar-J-Pin Through every perimeter cell along the final row.   Infill Material: Infill expanded panels with chosen material working from the bottom of the slope up towards. the crest (for less exposed slopes seeded top-soil is suggested, adding small shrubs will give improved protection). Limit Drop height to a maximum of 1 m to avoid damage or displacement of the cell walls. Compact infill material per engineer's specification. Typical applications Cut or fill embankment slopes Shoreline revertments Abutment protection Stormwater / Waste water lagoons Containment dikes and levees geomembrane protection Landfill linings and covers Dam faces and spilways

• Material: LDPE
• Color: White
• Application: Erosion Control
• Feature: Filtration, Premium Quality, Protect From Drainage
• Type: Geocells
• Country of Origin: India

• Brand Name: Gayatri Geo
• Product Type: Hdpe Geocell
• Width: 142 inches
• Place Of Origin: Vadodara,Gujrat
• Condition: Good

G3 Geocell Adjustable Series is designed to provide more flexibility insection size than regular GeoGrid Section and cell size will change aseach section is expanded to the required dimension.Section length can be increased or decreased by adding or subtracting cells at no additional charge.G 3 450G3 Standard section are manufactured from 58 strips of HDPE, resulting in a section length of 29 cells and 10 cells wide. Each strip is the appropriate width and 142 inches (3.6 m) in length. Weld spacing is 18 in .12 in (450  3 mm). Cell density is 22 cells per meter squared. Cell walls are smooth and if perforations are required approximately 11% 1: 2% of the cell wall is removed.G 3 650G3 Standard section are manufactured from 58 strips of HDPE, resulting in a section length of 29 cells and 10 cells wide.Each strip is the appropriate width and 142 inches (3.6m) in length. Wed spacing is 26.0 in 1 .12 in (650 : 3mm). Cell density is 9 cells per meter squared. Cell walls are smooth and if perforations are required 11% :k 2% of the cell wall is removed.G 3 350G3 Standard sections are manufactured from 58 strips of HDPE, resulting in a section length of 29 cells and 10 cells wide. Each strip is the appropriate width and 142 inches (3.6m) in length. Weld spacing is 14.0 in 12 in (355 : 3mm). Cell density is 35 cells per meter squared.Cell walls are textured and if perforations are required 11% 2% of the cell wall is removed.

• Material: High-quality Polymer Material.
• Application: Multi-layered Earth-retaining And Water-retaining Gravity Structures.
• Brand Name: KT
• Usage: Used in construction and soil-erosion treatments.
• Condition: Good
• Place Of Origin: Mumbai
• Min. Order Quantity: 20 Feet Container

We are proficient in manufacturing Geocells. Our Geocells are made using high-quality polymer material. Geocells are designed for protection and stabilizing applications. We offer Geocells which help in enhancing the performance of material used in construction and soil-erosion treatments. Our Geocells are durable and highly efficient in their field of operation which makes us a well-known Manufacturer, Exporter & Supplier of Geocells in Maharshtra, India. Applications Protection and stabilization of steep slope surfaces Protective linings of channels and hydraulic structures Static and dynamic load support on weak subgrade soils Multi-layered earth-retaining and water-retaining gravity structures

• Country of Origin: India
• Type: Geocells
• Thickness: 1.5-2mm
• Application: Ground Stabilization, Load Support
• Color: Black
• Feature: Filtration, Long Life, Premium Quality
• Pattern: Plain

• Country of Origin: India
• Type: Geocells
• Material: HDPE
• Thickness: 0.5-1mm, 1.5-2mm, 2.5-3mm
• Application: Erosion Control, Ground Stabilization, Load Support, Slope/Channel Protection
• Color: Black
• Feature: Long Life, Premium Quality, Protect From Drainage
• Pattern: Plain, Texture
• Size: Customized Size Available

KM Green Vision is the best HDPE Geocell Manufacturer in India. We manufacture Geocells in India that meet evolving needs across various sectors obliterating higher costs. They are in high demand owing to the rapid infrastructure and road developments around the globe. Geocells are cellular confinement devices that were developed as simple and long-lasting materials for stabilizing and protecting the environment. Cellular confinement methods successfully preserve the compaction of the soil, resulting in a stronger structure for both the infill and the pavement. The Geocell’s three-dimensional honeycomb shape ensures its strength and durability. This format establishes a framework for better load distribution. The cell is built of high-density polyethylene (HDPE), which is used to stabilize soil that is weak or unstable. This is due to their capacity to minimize soil particle lateral movement while vertically loading on the enclosed infill. Our company is counted among the best HDPE Geocell Supplier in India. Geocells give a mattress effect and improve the flexibility of the materials in addition to providing stability. The cells have high elastic stiffness and tensile strength, and as a result, they increase the product’s load distribution. Less rutting occurs in the surface materials above due to the weight distribution created by the cells. This also cuts down on the amount of granular infill required. The design of the cells allows for infill to be imported locally, allowing for the use of marginal soil as an infill. Finally, Geocells increase the product’s asphalt layers, which has numerous advantages. The primary benefit is the possibility to use less asphalt because the cells last longer than ordinary asphalt. Contact us and get the best HDPE Geocell Manufacturer in Delhi.