Glass Assembly Dealers

• Voltage: 220 V
• Material of Construction: Metal
• Power Source: Electric
• Automatic Grade: Semi Automatic
• Frequency: 50 Hz
• Max Pressure: 3-6 Kg

Glass Lined Reactors are used instead of glass reactors especially when the scale of operation is large and relatively high pressure steam is to be used as heating media. GLR is very common in API, Fine chemicals and chemical Industry Quite often assemblies like Simple Distillation Unit, Reaction Distillation Unit, and Fractional Distillation Unit etc. are installed above glass lined reactors. The basic features of these assemblies remain the same but glass shell and tube heat exchanger is preferred due to the large scale of operation   Glass Assembly Set up changes with process requirements like Batch /Continuous Size of GLR Requirement of Azeotropic distillation Site constraints Process Requirements Instrumentation and Automation requirements   You are requested to give following details to furnish you offer GLR Size Available total height area Operating Pressure

• Material: Mild Steel
• Surface Finishing: Polished
• Shape: Round
• Application: Glass Assembling
• Feature: Accuracy Durable, Dimensional, Extra Stronger, Hardend & Temper, High Quality, High Tensile
• Type: Boiler Gauge Glass Assembly

• Material: Borosilicate Glass

Over - GLR Glass Assemblies are used for a general purpose distillation process which is to be operated at atmospheric pressure or vacuum. Vapours from the Glass Lined Reactor (GLR) rise through the column and enter into condensers. Condensed Material then after gets either refluxed back or collected into a receiver flask. This type of unit is consisting of adaptor plate, bellow with flange, column sections, Heat Exchangers, Pipe line components, vent valves, reflux line, receiver flask and drain valve. This unit is available for GL Reactors of capacity 500Ltr. to 3000Ltr. These Glass Assemblies can be designed as per the Clients' requirements.

Structural Glass Assemblies also know as Suspended Assemblies or Spider Glazing Systems have high impact visually but as they are always specific design solutions do require significant engineering consideration and must still provide a high level of weathering despite contingency in the detailing.Details : Structural glass assemblies can be large or small  from a trophy cabinet to a 100% glass commercial structure The use of no mechanical fittings is possible. As structural glass assemblies do not have the benefit of movement joints or seismic receivers like a conventional aluminum framed curtain wall, special consideration must be given to building movement, live load deflections and environment loads such as wind and seismic. As these types of assemblies are often installed in areas of high density people movement, ie emergency egress pathways where human safety is paramount, it is imperative that they are engineered accordingly and that the glass specified is appropriate for overhead situations. Product Features : A wide range of fittings are available from standard spider fittings to  designer fittings. Fixing detail can be tailored for individual projects including side fixed, bottom fixed or top mounted fittings to meet the requirements of small canopies through to complex glass walls. Manufactured from 316 stainless to maximise the products life and appearance and available in polished or satin finishes. Swivels are available for toughened, laminated, or double glazed units including flush fitting and surface mounted fixing options. Custom design and fabrication services are available for specific projects.

• Country of Origin: India
• Size: 20-25Inch, 35-40inch
• Type: Rear Axle Assembly

We are Offering Rear-door-glass-sub-assembl.

• Country of Origin: India
• Size: 30-45cm
• Type: Glass Assembly
• Material: Borosilicate Glass 3.3
• Diameter: 0-10mm, 10-20mm
• Shape: Round
• Thickness: 0-5mm, 5-10mm
• Application: Glass Assembling
• Grade: AS, ASTM
• Color: Transparent
• Feature: High Quality
• Surface Finishing: Polished
• Brand Name: YASH

Our company is an experienced name, which is counted among the top Manufacturers and Suppliers of Glass Wiper Assembly from Maharashtra, India. We manufacture Glass Wiper Assembly using high-grade raw material and the latest techniques at our well-equipped production house. Due to its perfect design, it is used to clean glass surfaces in both residential and commercial sectors. Our quality controllers conduct stringent tests on Glass Wiper Assembly in order to ensure that only the defect-free ranges reaches the customers’ end. Used when manual cleaning required inside glass surface in side glass / ports

• Type: VIEW GLASS
• Brand Name: KABIR
• Certification: ISO 9000-2001
• Model Number: TMVG-09
• Place of Origin: VADODARA

We are a reputed manufacturer and supplier of Tank Mounted View Glass Assembly based in Vadodara, Gujarat, India. We supply a wide range of Tank Mounted View Glass Assembly as per the customers requirements. We supply high rated units of ANSI 150#, ANSI 300# and ANSI 600# where the material certification is furnished with all the units. The maximum operating temperature of the assembly is 200° C and the maximum pressure that it can sustain is 25Kg/cm.   Details : “Kabir”Manufactures Industrial Sight Glass Assembly for various mounting options such as Weld Pad type according to requirement, ANSI Flange OR Plain Pad type, Weld Neck Flange type. Other mounting options are available as per the requirement “Kabir”make Sight Glasses of Weld Pad types are designed to be welded on the Vessel or Tank. The lower weld pad flange is available in many alloys and is 150# rated standard, higher rated units are available. Cover plate flanges used in the manufacturing of our sight glasses are from ASME Section VIII acceptable materials. The lower weld pad can be provided with a cylindrical or spherical curve to match the vessel or tank, eliminating the need for special nozzles and expensive saddles. Special configurations are always available to meet customer requirements “Kabir”make Sight Glasses of ANSI Flanged type are Bolt-on units designed for attachment to ANSI flanged nozzles or vessel studding outlets. The lower flange is a standard ANSI 150# Raised Face flange. Higher rated units are also available. (300# and 600#). Material certification is furnished with all the units “Kabir” make Sight Glasses of Weld Neck Flange type are weld neck units designed to be welded on to pipe ends or into tanks or vessels. The lower flange is a standard ANSI 150# weld neck flange. Higher rated units are also available. (300# and 600#). Material certification is furnished with all the units.    Features : Temperature Ratings : Maximum Operating Temperature rating is 200oC Connections : Flanged OR Socket Weld OR Butt Weld OR Weld Pad OR Weld Neck Flanged End Connection Pressure Ratings : Maximum Pressure rating is 25 Kg / Cm2 Sizes : From 15 NB to 300 NB Pad Flange : M.S, C.S. (A–105), S.S.304, S.S.316, or any other alloy. Cover Flange : M.S, C.S. (A–105), S.S.304, S.S.316, or any other alloy. Window : Toughened Borosilicate Glass. Fasteners : SS316 or SS304 or SA 193 Gr.B7 Gasket : CAF or PTFE.

We are a well-known manufacturer and supplier of sight glass assembly in india. We offer sight glass assembly with excellent durability. Right from the procurement of the raw materials required for the manufacture of sight glass assembly, we consciously work on the high quality standards. Various features of the sight glass assembly make it a utility material for the clients. types double window sight glass assemblyround sight glass assemblysight glass applications used in pressure vesselsused for shock absorptionsuitable for operating with different fluids

• Size: Standard
• Type: Automatic
• Material: Borosilicate Glass
• Shape: Round
• Thickness: 5-10mm
• Application: Industrial
• Temprature: 400 Deg/Cel
• Stirring Speed: 400 - 650 rpm

Distillation Assembly on Glass Lined Reactor that we provide is manufactured using high-grade borosilicate glass in order to assure excellent quality. Our Distillation Assembly is easy to install and require low maintenance. We make available Distillation Assembly with different technical specifications to meet the diverse demands of buyers. Distillation Assembly on Glass Lined Reactor is widely used in chemical, paint and fertilizer industries. Features : Distillation Top With Coil Heat Exchanger Vent Condenser and External Reflux with receiver for vesselDistillation top with shell and tube heat exchanger and exter and reflux separator with receiver for vesselDean and Stark Type Distillation Top with Coil heat exchanger ,Product Cooler and internal reflux with receiver for vesselsDistillation Top with Coil Heat Exchanger Product Cooler and Internal reflux with receivers for vessels Technical Specification : All Glass items shown are manufactured from borosilicate glass 3.3 are widely used as the basis for the construction of complete process systems all over the chemical, dyestuff, food pharmaceutical, and petrochemical industries. The abbreviation for the coefficient of linear expansion which is (3.3 ± 0.1) x 10-6 K-1 . This is lower than any other industrial glass. Since this glass expands less, the tensile stresses in the glass wall during heating are less, which means that it is able to withstand a greater thermal shock and the maximum working pressure for a given operating temperature is greater. One reason for this widespread used is the special properties of borosilicate glass 3.3 (see below), complemented by the use of other highly corrosion resistant materials such as PTFE and ceramics Brief about product : Glass lined reactor is FDA approved equipment which can be installed in Flame Proof / Explosion Proof Areas of a chemical plant for large scale operations where operating parameters within the GLR are higher than glass assemblies because large volumes are handled. Here high pressure steam can be used as heating medium on glass lined reactors. Glass distillation assemblies of various types can be installed on these reactors as per the process requirements . The basic features of such assemblies remain the same but coil type heat exchangers can be replaced with higher capacity shell & tube heat exchangers

• Material: Stainless Steel
• Application: Chemical Industries
• Diameter: 17 mm
• Color: Transparent
• Size: 300 mm
• Types Of Glass: Reflex Gauge Glass
• Brand: Baumer

• Brand Name: Shankar Scientific
• Material of Construction: Glass Line Reactor
• Capacity: 100 L
• Max Temperature (degree Celsius): 100

Spherical Cylindrical Graduated Feed Vessels for controlled addition of Liquid Reactants. Vapour Column – Packed or Hollow Primary Condenser – Coil Type Glass Heat Exchanger or Shell & Tube Type Heat Exchanger. Vent or Secondary Condenser Product Cooler – For cooling distillate Phase Separators – For multi-component distillation or Azeotropic Distillations Distillate Receivers for continuous operation without breaking of Vacuum Pressure Equalisation ensured by process pipeline design being to maintain complete hydraulic integrity and single point application of vacuum over the complete system.