Glass Lined Reactors Dealers

Line Reactor or Line choke or Inductor are put on the input or output of the motor control unit known as VFD (Variable Frequncy Drives) which protects VFD and motor from peak current. Line Reactor also reduce di/dt that is known as rate of rise of current. Reactor also helps to reduce the harmonic content in the current waveform. Reactor put on line side (input) is known as line reactor/choke and the reactor put on load side (output) is known as load reactor/choke. Line reactor/choke will reduce the voltage and current stress on the input rectifier of motor controlling unit (Variable Frequency Drive - VFD) which will increase reliability and life of VFD. Load reactor/choke generally used in the condition where too much long cable to connect motor with VFD. It will create parasitic capacitance effect which will harmful for motor and in some cases motor winding burns. In this case load reactor/choke will be a good and reliable solution. On the number of phases Line Reactor and Load Reactor classified in four categories. 1. Single Phase Line Reactor 2. Three Phase Line Reactor 3. Single Phase Load Reactor 4. Three Phase Load Reactor Any Reactor generally selected from motor power rating or current rating, % Impedance, Rated Voltage level. Features: Manufacturing Single Phase line/load reactors for 0.5HP to 7.5 HP VFD/motor or as per customers requirement Manufacturing Three Phase line/load reactors for 0.5HP to 500 HP VFD/motor or as per customers requirement Our reactors are known for quality and noise free operation Vacuum pressure impregnation We also manufacture the line reactor / choke / inductor as per customer requirement.

Jackted Glass Reactor 20 Liters Senco Jacketed Reactors are first choice reactors in any scale up lab due to flexibility, compact size and ease of operation. The Reactor setup is complete with Skid mounted reactor setup with overhead stirrer, reflux condenser, drip system. Various options like Distillation, Separation Receiving, Rectification receiving, Jacket pressure release device, System pressure release device, reactor baffles are available to choose from. Size ranges right from 10L, 20L, 30L, 50L, 100L and 150L. Known for its best in class heat transfer rates, Senco glass reactors can be installed and configured within minutes and fit easily in most walk in fume hoods. Senco Glass reactors are developed by sticking to the basics, keeping in mind safety of the user and focusing on giving desired results. They enable to achieve desired results affordably and are backed by trustworthy service. The Cap Style reactor is simple yet accurate, basic yet precise, up to the mark on performance and friendly on budget. These Jacketed Reactors are used for a variety of applications including: Common Chemical Reactions Liquid/Liquid, Liquid/Solid Distillations Reflux Boiling Azeotropic Distillation (Phase Separation) Evaporation to any desired consistency Multi-component Reactions Gas dispersion below liquid surface Crystallization Mixing

PTFE lined piping technology was developed to meet serve operating conditions in the chemical handling industry to solve the problems of Corrosion, Erosion & maintenance free operation for many years. This product is the substitute for MS / SS piping & PP / HDPE plastic piping which causes Corrosion and maintenance problems frequently  

• Material of Construction: Glass Line Reactor, Borosil Glass

We are offering glass reactors.

• Condition: Used
• Warranty: 1 Year
• After-Sales Service Provided: Spare Parts
• Capacity: <1 Kl, 1-2 Kl, 2-3 Kl, 3-4 Kl, 4-5 Kl, >5 Kl
• Material of Construction: Glass Line Reactor, Stainless Steel, Borosil Glass, Mild Steel, Grp
• Max Pressure: 0-3 Kg, 3-6 Kg, 6-9 Kg, 9-12 Kg, 12-15 Kg, >15 Kg
• Features: Vertical Orientation, Horizontal Orientation, Temperature/ Pressure Indicator, Insulated Jacket

We are offering glass reactor.

Glass Line Reactor available in various Capacities From - 50 Litre to 20KL Make - GMM Pfaudler &amp; Swiss Glascoat

• Country of Origin: India
• Type: GLASS
• Brand Name: GARG

• Brand Name: Ablaze
• Material: Borosilicate Glass

We are offering glass distillation set up over glr. Glass lined reactors are used instead of glass reactors specially when scale of operation is large and relatively high pressure steam is to be used as heating media. Quite often assemblies like simple distillation unit, reaction distillation unit and fractional distillation unit etc. Are installed above glass lined reactors. The basic features of these assemblies remain the same but glass shell and tube heat exchanger is preferred due to large scale of operation. A typical fractional distillation unit type assembly over glr is shown in nearby figure. The assembly can be separated into different categories.

• capacity: 500 liters to 10,000 liters

Glasslined reactors from 500 liters to 10,000 liters capacity, gland packing or mechanical seal. reactor should be in working condition and not damaged.

• Voltage: 220 V
• Type: Lined
• Warranty: 1 Year
• After-Sales Service Provided: Spare Parts
• Power Source: Electric
• Frequency: 50 Hz

We are one of the trusted companies in India, which is manufacturer and exporter of Assemblies over Glass Lined Reactor. The system we provide is based on latest technology, which is mechanically designed and tested by our engineers so that it can give the best of its performance. Our system is fully customized to meet our client’s requirement.Glass Lined Reactors are used instead of glass reactors specially when scale of operation is large and relatively high pressure steam is to be used as heating media. Quite often assemblies like Simple Distillation Unit, Reaction Distillation Unit, Fractional Distillation Unit etc. are installed above glass lined reactors.The product delivers best performance, has dimensional accuracy and durability. It is used instead of glass reactors especially when the steam of relatively high pressure is to be used as a heating media.Features : Effectiveness Excellent finish High strength

• Country of Origin: India
• Brand Name: YASH
• Voltage: 220-240 V
• Name: Glass Assemblies Over Glass Lined Reactors
• Color: Transparent

Yash has the technical expertise to provide various types of GLR Overhead Assemblies specially customized as per client’s requirements.Glass Lined Reactors are used instead of glass reactors specially when scale of operation is large and relatively high pressure steam is to be used as heating media. Quite often assemblies like Simple Distillation Unit, Reaction Distillation Unit, Fractional Distillation Unit etc. are installed above glass lined reactors. The basic features of these assemblies remain the same but glass shell and tube heat exchanger is preferred due to large scale of operation. A typical fractional distillation unit type assembly over GLR is shown in adjacent figure.

Glass autoclaves pressures upto 6 bar.100 ml to 2 ltrs. volume.High torque zero leakage magnetic drive coupling.Ideal for corrosive applications and to view the reaction.Fully automated PC controlled high pressure system pilot plant to continuously monitor, control & record various parameters like temperature, pressure, motor speed, gas liquid flow, level, pH, turbidity, torque etc.Polycarbonate transparent cover is provided from all 4 sides of glass vessel for safety.Material of construction (MOC): Glass with SS316 Peek PFA coating Hastelloy BC Monel Inconel Nickel Titanium Tantalum Zirconium etc.

Operating Limits Shaft Dia: 40mm to 140mm Pressure: 10 Bars (max) Temperature: -50°C to +180°C Speed: 200 rpm (max) Ceramic Sleeve as a special feature

• Brand Name: BLOCK
• Supply Voltage Max: 480VAC
• Output Current: 90A
• Length: 4.1"
• Height: 7.1"
• Phase Type: 3 Phase
• Product Range: LR3 Series
• Width: 8.3"
• Inductance: 245µH
• Part Number: LR3 48-3/90

Ms glass lined reactor jacketed pan 100 liter for top glass assembly. Export quality glass lined vessel.

Swet Flon manufacturer of all spares for Glass Lined reator & Column like Valve Seats, Adaptor Rings, Gaskets Protection Rings, Manhole covers, Spargers, Dip Pipes, Spindle. Also manufacturer repair parts like Repair boots (Agitator and Baffle), Shaft Sleeves, Nozzle repair shields, Manhole repair shields as per Customer requirements.