Graphite Gaskets Dealers

• Material: Graphite Steel
• Shape: Round
• Thickness: 10-20mm
• Color: Brown, Grey
• Finishing: Polished
• Grade: AISI
• Application: Fittings
• Feature: Durable, Fine Quality, High Strength

Graphite (Graphoil® ) moulded rings are made from pure graphite containing no binder or Fillers. Flexible Graphite Gaskets can be made to any size, shape, profile as per Drawing from Sheets.These May be from :Plain Flexible Graphite- Sheet / Foil insert Tanged Sheet insert- Sheets / Gaskets with Metal Insertion of SS 304 / SS 316 / GI- Wire Mesh in Stainless Steel / Carbon Steel.The Flexible Graphite Gaskets are specially designed to provide the desired compression with high percentage recovery and low creep relaxation. Seels the minutest imperfections - Effective and excellent Sealing.Specifications : High Temperature Resistance : -200 deg C to 600 deg C (+3000c in non-oxidizing areas) High Chemical Resistance : PH 0-14 High Pressure Resistance : Upto 1000 PSI High Cross Section Density : 1.6 gm/mm (For Moulded Rings) depending on design Upto 12000PSI fro metallic Gaskets.

their high thermal conductivity ensures rapid heat dissipation and allows high temperature capability (except in oxidizing atmospheres). Our gaskets made from graphite flake material excel in extreme conditions, withstanding heat, pressure and aggressive/corrosive chemical environments to retain stability and sealing performance in high temperatures and pressure fluctuations. Graphite gaskets are often reinforced with a stainless steel insert.  Industries Refineries Chemical and Petrochemical Plants Paper Mills Industrial Fluid Sealing Vibration Dampening Steam Services Cryogenic Applications Thermal, Electronic and Electrochemical Applications

The Corrugated Metal Graphite Gasket that we provide is highly appreciated for its high quality including features like strength and durability. This Corrugated Metal Graphite Gasket is manufactured with a corrugated metal as core with flexible graphite sheet adhered to both gasket faces. This type of Corrugated Metal Graphite Gasket makes an excellent product for both standard flange gaskets and heat exchanger type gaskets where there is low bolt load or high available gasket stresses. Highlights : High seal abilityConformity where low bolt load is availableMaintains high bolt loads, upon re-tightening, in heat exchanger applicationsHeavy gauge corrugated insert for supportChoice of insert metals

• Thickness: 10 mm-45 mm
• Size: 1/2-36 Inch
• Material: CFT,PTFE,Rubber,And also available in,Stainless Steel,Copper,Mild Steel,Ne,Graphite,Aluminium
• Shape: Round
• Brand: Technoseal Engineering
• Pack Type: Box

Gaskets - Manufacturer of Industrial Gaskets and Customized Gasket from India. Specialized in making CAF Gaskets, Spiral Wound Gasket, Ring Joint Gaskets, Metal Jacketed Gasket, Rubber Gaskets and Teflon Gasket from India.

Our organization offers highly effective range of graphite gasket, which is widely used in various industrial application.

V ONE Graphite Gasket is made from 100% pure flexible graphite with SS316 sheet and wire mesh insert. The gaskets are available in wide range of densities as per client̢۪s requirement. Graphite Gasket is very versatile in its range of application suitability and this could be attributed to its unique properties such as excellent resiliency, compressibility & inertness. The metallic reinforcements of Graphite Gaskets provide mechanical strength which enhances its temperature & pressure taking capacity. Applications : Flanges handling superheated steam, as cylinder head & exhaust gaskets in automobiles, Nuclear & aerospace applications. It can also be used for sealing flanges handling acids, alkali, solvents & other aggressive fluids. Technical Parameters & Chemical Content : Temperature : -200oC to +650oC (in steam)Pressure : Upto 650 bar (for Metallic)pH Range : 0 to 14Chloride Content : < 50ppmAsh Content : 0.5% max

• Size: 10-20inch
• Type: Exhaust Manifold Gaskets
• Material: Rubber
• Shape: Oval
• Thickness: 10-20mm
• Color: Dark Black
• Finishing: Polished
• Warranty: 0-50 ℃
• Application: Electric Use, Industry Use
• Feature: Fine Quality, High Strength, Perfect Shape

• Size: 1/2 " to 24 "
• Type: Spiral
• Material: Rubber
• Shape: Round
• Thickness: 10-20mm
• Certification: ISI Certified
• Color: Grey, Green
• Finishing: Polished

REX Graphite Rings are manufactured normally in a range of densities from 1.2 g/cc to 1.8 g/cc with carbon content ranging from 99% to 99.85% Corrosion and Oxidation resistant grades and PTFE impregnated grades also supplied. Flexible and highly impermeable to gases and liquids. Metal tipped graphite molded rings to customer drawings are available for high pressure/anti extrusion applications. These rings have high thermal conductivity and don’t contain any Adhesives or Binders and have self lubricating properties and is therefore virtually maintenance free. Standard Carbon Content : 99% Density Range : 1.2g/cc to 1.8g/cc. Temperature : -200°C to + 2,800°C in inert or reducing conditions. -200°C to + 500°C in oxidising conditions. Tensile strength : ASTM F152 >5.2Mpa Compressibility : 47% Recovery : ASTM F36/A >9% Chloride content : 50 ppm maximum. Suphur content : 1300 ppm Fluoride content : < 30 ppm Ash content : < 1.0 %

Flexible and conformable nature Chemical resistant, compatible with most corrosive chemicals Heat and flame resistant Thermal conductive, electrical conductive Low creep relaxation and no aging

• Thickness: 1-10mm, 2-16mm
• Weight: 50-100g, 100-150g
• Outer Diameter: 0-15mm, 15-30mm
• Specialities: Durable Finish Standards
• Shape: Round
• Color: Silver

Graphite (Graphoil®) moulded Rings are made from pure graphite containing no binder or fillers. Graphite Gaskets can be made to any size, shape, profile as per Drawing from Sheets. These may be from Plain Flexible Graphite Sheet / Foil insert Tanged Sheet insert Sheet / Foil insert Tanged Sheet insert Sheets / Gaskets with Metal insertion of SS 304 / SS 316 / GI Wire Mesh in Stainless Steel / Carbon steel. The Graphite Gaskets are specially designed to provide the desired compression with high percentage recovery and low creep relaxation. Seals the minutest imperfections – Effective and excellent Sealing. High Temperature Resistance : -200 deg C to 600 deg C (+3000C in non-oxidizing areas) High Chemical Resistance : PH 0-14 · High Pressure Resistance : Upto 1000 PSI High Cross Section Density : 1.6 gm/mm (For Moulded Rings) depending on design Upto 12000PSI for metallic Gaskets

We are of the biggest gasket manufacturers in india with more than two decades of experience. We manufacture all kind of gaskets which includes; asbestos gaskets, non asbestos gaskets, graphite gaskets, copper gaskets and multi layer steel gaskets. Our specialty lies in manufacturing of asbestos, non asbestos and graphite gaskets where we provide one of the finest qualities to our customers at the cheapest rate across the world.

• Thickness: 1 mm to 3 mm
•  :  
• Temperature: 650

1. Grafoil Metallic Non Metallic Gasket We are instrumental in offering our esteemed clients with Grafoil Gasket, which are precision made making use of finest quality raw materials. Moreover, these gaskets are highly acknowledged for its ability to withstand wide range of temperature that makes them ideal for all pumps and valves at cryogenic and elevated temperature at nuclear plants, steam turbines, pharmaceutical and food industries. We offer these gaskets in various technical specifications as per clients’ demands. Further, these gaskets are offered at very lower price as compared to others in market. Features: High vibration resistance Totally independent compound designed product High mechanical, electrical and physical properties Designed to meet high temperature Sizes 1 through 9 Material: Grafoil® (standard on both Reflex or Clear Gauges) Fiber or PTFE also available 2. Metallic and Nonmetallic Graphite Gasket We bring forth our valued clients a wide array of Metallic and Nonmetallic Graphite Gasket, which are generally to prevent leakage from or into the joined objects while under compression. Moreover, these Gaskets are well acclaimed for its high end features such as abrasion resistant, ductile and have enhanced load bearing capacity. We offer these gaskets in various modified forms as per clients’ demands. Also, these Gaskets can be offered at very economical prices in market. 3. Non Asbestos Gasket Backed by a team of highly experienced engineers, we are engaged in providing best quality Non Asbestos Gasket, which is a sealing material made by adding special adhesives and a little packing into it, then roll and sulfured. Moreover, these gaskets are extensively used in engineering, auto mobile, chemical, oil & gas, petro chemical, power generation, paper, glass & ceramic, sugar, steel, smelter, boiler, pharmaceutical, marin & various other industrial application.