Grease Milling Machine Dealers

The pneumatic grease pump is suitable for dispensing of grease & automatic feeding of grease to bearing and other moving parts of machines. Such as milling machine, rolling machine, presses & hammers, rubber processing machine, dye casting machine, furnaces etc. This pump is suitable for grease upto NLG-2. For distribution we used progressive blocks through this pump.

• Power: 3 hp- 30 hp
• Driven Type: Electric
• Sigma kneader: 5 kg-450 kg

• Voltage: 20 HP
• Brand Name: Perfect Engineers
• Phase: 20 HP
• Material: Stainless Steel
• Model: PECM-20
• Capacity: 1.5-2.5 MT/hr
• Drive Motor: 20 HP
• Inlet and Outlet: 3 inch
• Motor Speed: 2900 RPM
• Phases: 3
• Available Motor Brand: ABB, Crompton

Grease is a fine dispersion of an oil-insoluble thickening agent - usually soap in a fluid lubricant which is generally mineral lubricating oil. The soap is made up of fatty acid, tallow or vegetable oil saponified with alkali which can be hydrated lime, caustic soda, lithium hydroxide or aluminum hydroxide. The lubricating oil component is refined base oil-naphthenic, of medium viscosity index, or cylinder oil stock. Structurally grease is a “water-in-oil” emulsion. Its appearance is smooth, mostly translucent, soft or hard. Properties essential for performance of grease are structural stability, lubricating quality, low and high temperature performance (which are provided by the selected lube oil base stock), where as properties such as water resistance, high temperature quality, resistance to break down through continuous use and ability of grease to stay in place are provided by the soap. Additives eg. Graphite, modified clay, asphalt, oxidation and corrosion inhibitors, extreme pressure additives melybdenum disulphide etc. are used to impart specific properties as required by end application.

grease manufacturing, during the process at high temperature water vapor and little bit of fumes comes out from kettle and are routed through duct and vented out through the chimney. Some grease requires milling to ensure that the grease is homogeneous. For this, the grease is passed through a milling machine. The product is at times recalculated back into the finishing kettle until it meets the desired test results.