Ground Rods Dealers

• Brand Name: SG Power
• Size: 2m and 3m in 14.2 mm / 17.2 mm/25 mm
• Type: Copper bonded ground rods
• Country of Origin: Ghaziabad
• Condition: Good

Copper Bonded rods are made of low carbon Steel & are molecularly coated with 99.9% pure copper.This rods have high strength & good conductivity best corrosion resistance. Copper Bonded Rods dissipate all leakage currents to prevent any assets damage. These rods are manufactured to meeting international standards level. copper layer is supportive in bitter soil conditions as excessive salt / high moisture content. Earth Enhancing Compound - SG GEM PLUS - is filled in the bored hole and become a reason in substantially reducing earth resistance. Most commonly used size is 17.2 mm in copper bonded rods. Though for reference some std sizes have been mentioned in below table but different sizes of copper bonded rods can be provide as per customer needs. Copper bonded ground rods are best suit as earth solutions as copper has best conductivity and steel core has best strength resulting into enhanced life of earth system. SG power rods are available in 2m and 3m in 14.2 mm / 17.2 mm/25 mm and have ample ready stock to cater immediate demands of our esteemed customers.

• Material: Copper
• Diameter: 14.2 Mm
• Country of Origin: Made in India
• Brand Name: Yash
• Length Of Rod: 3m
• Model Name/Number: YG-CBR173

Known as the trustworthy suppliers, we are offering only the finest quality Ground Earthing Rods at reasonable price.Our entire range of products is produced as per international quality standards. Therefore, they are dependable and worth the price.We make use of the finest grade raw material that reflects in the finished products. Also, we make sure that it is procured from the trusted places only.

• Type: Copper Earth Rod
• Brand Name: Om Impex
• Material: Copper bonded on steel Rod
• Diameter: 12-20mm
• Certification: ISO 001;2008
• Length: 1-3 mtr
• Application: Earthing, Grouting
• Copper Thickness: 50-300 micron
• Country of Origin: Rajkot

The rods are manufactured from low carbon, high tensile steel with a 99.9 % pure electrolytic copper thickness of 50 to 300 microns. Thread rolling after plating preserves the copper thickness ensuring corrosion resistance across the threads. Threads comply with ansiasme b1.1-2003. Extensible earth rods are coupled using threaded, easy to use brass couplings. Connections can be made by using bolted clamps or exothermic welding process. Depending upon the requirements we can develop different types of copper bonded ground rods viz .  non-threaded copper bonded rods  threaded copper bonded rods  one size pointed and one threaded  customized rods advantages: • thickness of copper can be customized • ground rod available in all sizes and shapes • suitable for different humidity, temperature and ph value of the soil conditions • economical applications: our copper bonded rods are used in various sectors including lightning protection system, power generators, solar system, cnc machine, substations, microwave antennas, sugar and paper industry, transmission and power generators, telecommunication towers, computer and data, processing centers, manufacturing facilities and refineries & equipment body earthing.

We are one of the most recognized name in manufacturing profiles and ground rods which are manufactured as per customer's drawing and specifications. Its major application lies in electrification and earthing. Other than these, we have produced many different surfaces of profile bus bar (I Beam, Angle, Channel for trolleys), ground rods, ground copper plates, and lightning rods.

• Size: Rod Shape
• Type: Ground Rods
• Material: Copper Coated
• Diameter: 0-20 Mm
• Length: 0-3 Mtr
• Application: Earthing
• Weight: 250-5500 Gm
• Color: Copper Brown
• Feature: Durable, Easy To Fit, High Quality, Light Weight, Rust Resistant
• Condition: New
• Country of Origin: India

• COPPER BONDED GROUND ROD 15 MICRON: COPPER BONDED GROUND ROD 250 MICRON
• COPPER BONDED GROUND ROD 15 MICRON: COPPER BONDED GROUND ROD 250 MICRON

We are offering ground rod. we manufacture and export earth rod / earthing rods. Our range of ground rod / earth rod also includes copper bonded earth rod / copper bonded earthing rods. Copper bonded earth rod are made from low carbon steel of grade bs 970 or ais11018 with a high tensile strength of at least 600 n/mm2 . Low carbon steel core are molecularly tended with 99.9% pure electrolytic copper. salient features perfectly bonded rod will lost longer, drive easier and will not crack. Corrosion resistance while providing tee lowest resistance to ground. Threads are rolled by roll threading process, which ensures that when copper covers is maintained, at the root of the thread, roll thread gives greater strength than cut thread. Thread rolling process raises the surface of the rod, so teat thread dia. (t) is greater than shank dia. (s) even though many of our products are standard items and of standard bs grade, we also make special tailor made products made exactly to the requirements of our customers in terms of material grade and size. a earth rod / ground rod is an array of electrodes which is installed in the ground to provide a low resistance electrical path to ground or earth. In electrical engineering, ground or earth is the reference point in an electrical circuit from which other voltages are being measured or it is common return path for electric current or a direct physical connection to the earth. electrical circuits may be connected to ground / earth for several reasons. In mains powered equipment, exposed metal parts are connected to ground or earth to prevent contact with a dangerous voltage if electrical insulation fails. Connections to ground, limit the build-up of static electricity when handling flammable products or electrostatic-sensitive devices. for measurement purposes, the earth serves as a reasonably constant potential reference against which other potentials can be measured. An electrical grounding / earthing system should have an appropriate current-carrying capability to serve as an adequate zero-voltage reference level. In electronic circuit theory, a "ground" is usually idealized as an infinite source or sinks for charge, which can absorb an unlimited amount of current without changing its potential. Where a real ground connection has a significant resistance, the approximation of zero potential is no longer valid. Stray voltages or earth / ground potential rise effects will occur, which may create noise in signals or if large enough will produce an electric shock hazard. grounding systems: for building electrical grounding systems, an array of ground rods and copper bonding cable would serve as the ground bed. Ground rods can be made from steel with a copper clad surface (typically 2 metre long and 20 mm diameter. These are driven vertically into the ground and bonded together with bare copper wire.

Being one of the main manufacturers, exporters, and suppliers of Stainless Steel Ground Rods from Mumbai, Maharashtra, we pride in offering high-quality Stainless Steel Ground Rods at highly affordable rates in the market. The Stainless Steel Ground Rods are used to overcome many of the problems caused by galvanic corrosion which can take place between dissimilar metals buried in close proximity. The main advantages of Stainless Steel Ground Rods is that they are highly resistant to corrosion and much more anodic than copper.

• Material: Galvanised Iron
• Length: 1.5 m
• Size: 4- 12
• Color: Silver
• Condition: New
• Application: Earthing

Keeping in-line with the globally accepted standards, the raw material used for production is of high-grade. Thus, we always keep a check on the final product to make sure that the same is defect free. We are backed by the most sophisticated transit system, thus buyers can stay rest assured for timely delivery of the orders.

• Diameter: ½ to 1” inches, 12 to 26 (mm)
• Length: 6 & above (feet), 1800 & above(mm)
• Features: International quality standards, Precision engineered, Dimensionally accurate

We manufacture Brass Concrete Anchors, Pop up Anchors, Wood Deck Anchors, Stainless Steel Springs, Spring Covers, Installation tools, Stainless Steel Buckles, and other customised components.

Copper Bonded rods are made of low carbon Steel & are molecularly coated with 99.9% pure copper.This rods have high strength & good conductivity best corrosion resistance. Copper Bonded Rods dissipate all leakage currents to prevent any assets damage. These rods are manufactured to meeting international standards level. Copper layer is supportive in bitter soil conditions as excessive salt / high moisture content. Earth Enhancing Compound - SG GEM PLUS - is filled in the bored hole and become a reason in substantially reducing earth resistance. Most commonly used size is 17.2 mm in copper bonded rods. Though for reference some std sizes have been mentioned in below table but different sizes of copper bonded rods can be provide as per customer needs. Copper bonded ground rods are best suit as earth solutions as copper has best conductivity and steel core has best strength resulting into enhanced life of earth system. SG power rods are available in 2m and 3m in 14.2 mm / 17.2 mm/25 mm and have ample ready stock to cater immediate demands of our esteemed customers.   Advantages: Extra Ordinary Long Life Easiest to Install Maintenance - Not required Less Space Consistent Performance over a longer period

In order to obtain, good conducting level and uniform low resistance grounds we offer our customer with endurable Sectional Grounding Rod. They have similar features as those of Pointed/Plain Copper Bonded Ground/Earth Rods. They come with cold-rolled threads, which are stronger than cut threads and is able to provide added strength of continuous and unbroken grain flows. We make sure that the Sectional Earthing Rod has a strong guard at both ends with plastic caps. This prevents the thread from getting damaged in transit or shipping. One can drive the threaded Sectional Grounding Rod at least 10/20/30/40 feet or more to reach better conducting soils. In that case, juxtaposing, ground/ earth rod couplings and ground/ earth rod driving studs with the copper bonded sectional threaded rods will help to have a firm support. Features of Sectional Grounding/Earthing Rod   They are also copper bonded ground rods, giving better conductibility Use of cold-rolled threads to give unbroken grain flow The befitting equipment for deep-driving Molecular bonding of copper to the copper-sealed durable steel cores Higher tensile strength and straightness tolerance Better corrosion resistance power than galvanized rods 30 years of service life in some soils Uniform thickness due to the use of state-of-the-art manufacturing techniques Customers can browse through the huge range of Sectional Earthing Rod/ Grounding Rod available at the online store of Kopell. For better electrical equipment support anytime, we have huge stock of Sectional Earthing/Grounding Rods. 

We are the established manufacturer and supplier of a massive range of supreme quality Copper Bonded Ground Rod. Earthing Electrode mild steel copper bonded maintenance free earthing.Manufactured in accordance with the predefined industry standards, these are widely applauded in the market.

The copper Bonded Ground Rods We Manufacture are in High Demand in the Market Owing to Its Accurate Profile and High Performance. Competitively Priced and High Quality Copper Bonded Ground Rods have Placed Us in the Elite Group of Manufacturers and Suppliers from India. why Our Copper Bonded Ground Rods? corrosion Resistantbetter Performing Than Galvanized Rodsuniform Plating Thicknessaverage Tensile Strength of 80,000 Psistraightness Tolerance of .010" per Linear Footexceed the Requirements of Ansi®/ul® 467-1984, Csa®, and Ansi/nema® Gr-1 in Demand By : steel Plantspharmaceutical Industrychemical Industrypetrochemical Industryfertilizer Plantscement Industrypower Plantsrefineries Industryfood and Beverages Industry

• Length: 1.5 M
• Application: Earthing
• Material: Copper Bonded