GRP Pipe Dealers

• Country of Origin: India
• Shape: Square Tube
• Color: As Per Client’s Requirement
• Surface Treatment: Color Coated
• Thickness: 3mm Onwards
• Materials Used: Polyester, Vinyl Ester(Available in FR & Non FR)
• Usage/Applications: Widely Used in Chemical Industries, Operating Platforms and Electrical Appliance Industry.

Features: Superior shear and bending capacity. Good hardness. Easy fabrication. Corrosion resistance. Anti-slipping performance. Lightweight. Wide range of applications.   Applications: FRP/GRP Fences FRP/GRP Handrails FRP/GRP Ladders FRP/GRP Cooling Towers Construction area Transport System Tunnels

• Application: Various Sectors such as chemical industries, thermal power plants, irrigation lines, drinking water supply
• Application: Industrial
• Quality: Best

MFGIL-GRP is the first Plant in South India to manufacture Glass Reinforced Polyester (GRP) pipes, with a considerably large diameter (upto 2600 mm), on CFW Machine. This process allows the use of continuous glass fibre reinforcements in the circumferential direction. The production activities are carried out under controlled procedure with continuously advancing Mandrel process. MFGIL has Helical Winding Process Machine with capacity 50 mm to 1000 MM Dia GRP/ GRE pipes.   General Characteristics of GRP Pipes Excellent corrosion resistance Excellent strength to weight ratio Very light weight Electrical properties - GRP pipes are non conductive, but conductivity can be introduced during manufacturing, if required, for special applications. Dimensional stability - While maintaining dimensional limits, the pipe laminate exhibits excellent mechanical & chemical properties. Low maintenance cost - almost nil.   Applications of GRP Pipes Growing awareness of the operational cost savings and superior corrosion resistance offered by fibreglass-reinforced pipe by operations has resulted in widespread use for the following applications: Water transmission and distribution (potable and raw water,Irrigation) Sanitary sewerage collection systems and outfalls (direct buryand sliplining ) Storm sewers Hydroelectric penstock lines Seawater intake and outfalls Circulating cooling water, make-up and blow down lines for power plants Industrial applications Industrial effluents Industrial process pipelines Industrial ducting Well-casing Fire protection Industrial wastes & effluents Food industries   Our CapacityMFGIL can manufacture GRP pipes ranges from a nominal diameter of 50 mm to 2600 mm & fittings with different stiffness and pressure classes by complying to national and intentional standards.MFGIL has in-house Pipe Design, R & D Department and a complete test facility. The unit has a fully integrated facility of manufacturing and testing of GRP pipes, as per standards. MFGIL has a production capacity of about 300 km per year.   In-house Production Testing and Design Facility  The testing facility at our unit caters to stringent quality checks at every stage of the manufacturing process. The quality team facilitates: Raw material inspection Dimensional and workmanship Hydro test Stiffness test Beam strength Longitudinal tensile strength Hoop tensile test Type test Long-term hydrostatic test (HDB) Potability of water (for potable water supply pipe) Strain corrosion test (sewerage, industrial waste water other than potable pipe).

We would like to introduce ourselves as one of the leading export channel partners for reputed multinational companies. we are in this business for the last 60 years and have established a reputed name in the electromechanical industries globally. for frp gratings, frp cable trays and cable management system, frp electrical poles and flag masts, frp handrails and ladder systems, frp access system-scaffolding grp piping�s etc.

• Brand Name: FIBROTECHNIKS
• Surface Treatment:: FABRICATED
• Application:: These pipes are used for raw water, effluent, chemicals,gases etc.
• Technique:: HAND LAY UP
• Dimensions:: 25 mm DIA UPTO 5000 mm DIA
• Length:: 3 Mtrs or 6 Mtrs

We offer wide range of grp pipe in different application that are fabricated using suitable polyester or vinyl ester thermoset grp pipe are used for wide variety of corrosive chemicals and gases due to its resistance to chemical media. advantages of using grp pipe :- light weight lower cost of supports easy for installation / handling saves cost and time of installation corrosion resistance these pipes are manufactured in various sizes, pressures, thickness depending upon its applications. suitable industries : - power plant / fertilizers / petroleum/chemicals - paints/ pickling plants/textile

We are looked upon as one of the most prominent Glass Reinforced Plastic Pipes Manufacturers and Suppliers in the country. The GRP Plastic Pipes that we are manufacturing are aimed to serve the purposes of the clients. Also, we provide after sales service and in house designing facilities. We are manufacturing GRP Plastic Pipes with the utmost care with the customer’s requirement in mind. Advantages Corrosion resistantLight weightLow friction – head losses – hydraulic efficientLong service lifeGood chemical resistanceGood insulating qualityHigh mechanical strengthNon - toxicLow thermal & electrical conductivityHigh resistance to surge pressure Applications Power plantRefinery, petrochemicalChemical plantsFertilizersPharmaceuticalsPaper, pulp, printing industryTextileEffluent removalSewerage water supplySea water supplyRaw water supplyPotable water supplyDesalination plantsPickling , metal finishing industryDyes & chemicals Capacity We are manufacturing pipes of sizes 25mm nb up to 2500mm nb. Their pressure class ranges from 2kg/cm2 up to 20kg/cm2. Standard pipe length manufactured is 6 meters. Besides we also provide 12 meters of pipes at special request. High-pressure class rating pipes are also manufactured at special request.

We are main supplier of this product.

Grp pipes available upto 3000 mm with pressure rating upto pn20 available with various quality standards certificate.

• Shape: Round
• Thickness: 10-20mm
• Length: customized length
• Application: White
• Grade: AISI,ASTM,BS
• Feature: Crack Proof,Excellent Quality,Perfect Shape,Scratch Resistance
• Material: FRP GRP
• MOQ: As customer needs

ARC GRP Pipes are made through a superior filament winding process in a modern plant in Kolkata. Arc Is capable to produce of producing pipes from diameter of 100 mm to 3000 mm  and lengths of 6 meter each. GRP Pipes fittings as per client requirement, can also be made. Grp Pipes are used in both underground and over-ground applications. GRP Pipes are extensively used in the following industries: Drinking water transportation by Municipalities across the world. Power plants for sea water intake and transportation to the plant. Sewage and waste water transportation by municipalities across the world. Storm water drainage. Cooling water supply and discharge by power plants. Relining applications Reservoir for chemical plants.   GRP Pipes are produced in accordance with all the national and international standards like IS, ISO, BS, DIN, ASTM and AWWA. GRP Pipes are made by filament winding process with isopthalic, vinyl ester resins, E-glass and ECR Glass and Quartz sand. Production is done on a CNC Machine enabling good quality output with proper finish.  Key advantages of GRP Pipes include :   GRP Pipes are ¼th of the weight of Ductile iron pipes, steel pipes and 1/10th of the weight of concrete pipes. Grp pipes installation provide significant savings in installation over traditional pipes as installation is very easy. Installation is fast and reliable with EPDM Gaskets . Adjustment to pipes on site is easy as GRP pipes can be easily cut and finished as per required lengths. Grp pipes do not require linings, cathode protection, coatings,  wraps and other forms of corrosion protection. Overall maintenance cost is very low as compared to traditional materials. Smoother inside walls provide savings from pipe diameters and also lower power cost due to low consumption in pumping lines. Grp pipes do not conduct electricity and hence are not affected by induction flows. Elastic Characteristics of the GRP Pipes accommodates earth movements.

• Shape: Round
• Application: Green
• Feature: Durable, Excellent Quality
• Material: GRP
• Usage: For Acid, Chemical

• Length: upto 6m
• Material: GRP
• Shape: Round
• Brand Name: Aeron
• Nominal Size: 1 - 3 inch

manufacturing of large diameter Glass Fiber Reinforced Plastic (GRP) pipes, pipeline liners by continuous process in India. This venture was started in 1989 with Technical and financial collaboration of Veroc technology AS, Norway which was then known as Flowtite AS.

PFG members provide complete fiberglass piping for a variety of application, designed and manufactured to the highest quality standards. These companies assist customers with site layout, anchoring, support spacing, flow design,material selection and installation procedures. These fiberglass products provide uninterrupted transportation in spite of earthquakes, resident envoronment or the aggressive characteristics of transport. Motor Fuel Underground Piping : Single and Double wall fiberglass piping is used for the underground transfer of petroleum products, alcahol and alchol-blended gasoline motor fuels. This underground piping is avialable in diameters of 2 to 6 inches. Municipal, Chemicals and Industrial Piping: Standard and custom fiberglass aboveground and underground piping is used for municipal, chemical and industrial applications including transmisson of acids, caustics and for cooling tower lines, wastewater treatment process lines, raw water inlet and discharge lines. Pipe jacking, slipining and microtunneling no-dig applications are also included pipe diameters range froml to 108 inches. Oil Field Tubulars : Bonded or threaded line pipe is frequently used in production line. Gas gathering lines, tank battery hookups and salt water disposal, Standard diameters are available up to 16 inches with pressure to 3500 psi. Threaded tubing and casing are available up to 13-7/8 inches diameter for pressure up to 3000 psi.

Scott Bader has supplied polyster resins to GRP pipe and pipe liner manufacturers for over 40 years. Much of the early development with GRP pipes was for applications in chemical plants. Filament winding and centrifugal casting techniques have been developed to produce light-weight, low maintenance GRP pipes efficiently and effectively.   Crystic resins and gelcoats :- A complete range of proven Crystic products is offered for piping and lining applications including isophthalic and vinyl ester resins for sewage and water carrying pipes. Major GRP Pipe applications :- Chemical plant pipework Underground piping Above ground pressure pipes Sewage piping Portable water distribution Trenchless pipe repairs with GRP Liners :- In situ repair work can be carried out using a cured-in-place GRP liner, which is placed inside a damaged pipe then expanded to fit the existing pipe and simultaneously cured by circulating hot water. Pipe repair work can also be carried by using a pre-fabricated GRP slip liner, which can be used to line 'live' piping systems. Both pipe repair techniques are now used worldwide. Cost and disruption are kept to a minimum whilst essential repair work is carried out. Scott Bader's long association with the GRP pipe and pipe lining markets and its technical expertise and range of proven products for the GRP pipe industry gives customers peace of mind and a real competitive advantage for their business. Pipe jointing :- This can be carried out using spigot and socket systems with gaskets. Polyster resin collars can easily be cast onto pipe ands and machined to the appropriate dimensions. Resillient polyster resins containing a high loading of filler - such as ground silica flour - can be cold cured extremely rapidly and prove to be ideal for casting pipe collars. Pipes can also be butted together and joined using an overlay GRP joint, wet laminated on site.

GRP Pipes are manufactured from a thermosetting polyesrs or vinylester resin fiberglass reinforcement using the filament winding technique and pure silica sand filler.

• Our GRP pipes are strictly corrosion resistant and able to withstand strict weather conditions too.: They are non-toxic in nature and don’t harm our environment or mankind.

Owing to deep industry knowledge and skilled professionals, we are constantly engaged in manufacturing superior range of GRP pipes since the time of our inception. We make sure that our products are always prepared or manufactured based on current market trends by opting for latest tools and technologies.

• Length: 3m
• Brand Name: Bluemoon Fibre Tech
• Application: Chemical Handling
• Shape: Round
• Single Piece Length: 3 meter
• Nominal Size: 2 inch, 3 inch, >3 inch
• Material: GRP/FRP
• Color: Any
• Size/Diameter: Upto 600 mm
• Minimum Order Quantity: 3 Meter

• Shape: Round
• Length: 6m
• Brand Name: BSF
• Material: GRP
• Size/ Diameter: 2 TO 40 INCH
• Length of Pipe: 6 m
• Usage/Application: Chemical
• Color: White

• Shape: Round
• Color: Green
• Size: Customised

We are offering grp pipe. As we are a renowned grp pipe exporter and grp manufactuer based in india. Our grp pipe and grp pipe fittings have been widely appreciated throughout our esteemed clients. We proffer unmatched quality at very reasonable prices. We manufacture world best class grp pipe and grp fittings at reasonable prices. All pipes are designed as per the following procedure: selection of liner and resin system is based on corrosion data design of winding patterns laminate thickness is based on a) pressure b) stiffness design optimization using multifactor analysis finite element analysis using proprietary software for calculating stress windability check application: water transmission (transmission pipeline, intake pipeline , irrigation) effluent water sewer (gravity pipelines, pumping mains & outfall pipelines) industrial effluent industrial ducting well casting cooling water fire protection industrial wastes & effluents sea water food industries (refineries & breweries) chemical & petrochemical industries power plants oil & gas pulp refinery water desalination plants power plants pumping stations gas piping non corrosive piping jointing system of pipes & fittings restrained (tensil resistant) flanged joint butt and wrap joint non –restrained bell and spigot double bell coupling flanged joint to enable connections with steel & to allow for easy assembling & disassembling of process lines, grp pipes & fittings can be supplied with flanges, drilled in accordance with ansi, bs, din or other specification. Special requirement can be met upon request. Butt & wrap joint in general these joint will only be used for diameter over 100 mm. The preparation of this rigid joint requires good craftsmanship. Bell & spigot joint the socket end of this joint is an integral filament wound part of the pipe. The spigot end is a machined part on which o-ring seal is positioned. The flexible joint allows for axial movement of the spigot in the socket & some permissible angular deflection. Double bell coupling short pipes are joined using double bell coupling. The sealing of the joint is achieved by the compression of two elastomeric rubber gaskets when the joint is assembled. Testing procedures: we at balaji fiber reinforce pvt. Ltd. Imply internationally accepted procedures for testing pipes with latest technology and expertise. raw materials we purchase only from iso 9000 certified companies. The major raw materials are : chopped strand mat (csm): 225, 300 & 450 gsm e or c glass roving: 1200, 2400 and 4800 tex resin system: vinyl ester, super vinyl ester, isopthalic & orthophthalic polyester resin woven roving mat (wrm): 450 & 600 gsm product testing every pipe has been through following test: visual inspection (astm d2563) hydrostatic leak tightness test to 1.5 to 2 times rated pressure (awwa c 950) dimensional check for wall thickness, length & diameter (astm d3567) resin cure by barcol hardness batch testing: one pipe in every 100 pipes or lot size as specified by the customer is subjected to the following test: axial tensile strength (astm d2105/d638) hoop tensile strength (astm d2290) structural integrity at deflected condition (astm d2412) stiffness & flexural modulus (astm d2412) type testing: pipes manufactured with new resin systems or a new project is subjected to the following tests: impact resistance (bs 5480) ong term strength – hydrostatic design basis (astm d 2992) pipe joints using flexible elastomeric seals (astm d4161) strain corrosion (astm d3681)