Hall Sensor Dealers

• Type: Sensor Controller
• Color: White
• Condition: New
• Brand Name: Shoptron
• Color: White

      Connection: 6mm (external diameter); inlet water pipe diameter: 2. 5-4Mm Working voltage: dc 5v~24v Maximum working current: 15ma at 5v dc Flow rate range: 0. 3~6L/minThe water flow sensor consists of a plastic valve body, a water rotor, and a hall effect sensor - when water flows through, the internal rotator will change its speed with different rates of flow, and the Hall effect sensor outputs the corresponding pulse signal. Use with laser cutters or CNC to measure if and how much water is flowing through the laser tube or CNC spindle for cooling. Specifications: Working voltage: dc 5v~24v; maximum working current: 15ma at 5v dc; flow rate range: 0. 3~6L/min; connection: 6mm (external diameter); inlet water pipe diameter: 2. 5-4Mm; load capacity: ≤10ma (dc 5v); operating temperature: ≤80℃; liquid temperature: ≤120℃; operating humidity: 35 percent ～90 percent RH; water pressure: ≤2. 0Mpa; storage temperature: -25～+ 80℃; storage humidity: 25 percent ～95 percent RH; connections - red: power in, black: ground, yellow: signal output.

• Country of Origin: India
• Type: Current Sensor
• Color: Black
• Condition: New
• Warranty: 5years
• Brand Name: ELECTROHMS
• Output: Voltage
• Product Name: Split core hall effect open loop sensors

Split core hall effect current sensor measure DC, AC and complex current wave forms with galvanic isolation. The advantages include low cost, small size, lightweight and low power consumption and are especially advantageous when measuring high currents. This sensor can be clamped on to the existing cable without interruption of the primary circuit.

• Material: Aluminium
• Voltage: 5 V - 120 V
• Usage/Application: Industrial
• Operating Temperature Deg Celsius: -20 To +125 Degree Celsius
• Operation Voltage: 2.8-36 V
• Output Current: 400 mA To 600 mA

Smartsaa offers hall effect proximity switches with high response speed. These switches are used for sensing speed of turbine, motors and high speed equipment. The hall effect sensor senses geared teeth and gives switching output. Application: speed sensing of turbine, motors, compressors and rotating equipments specification : supply : 10-30 v dc op : pnp or npn load current : 200 ma size : m 12 m 18 sensing distance : 1-2 mm object sensed : teeth of geared wheel max operating frequency : 100 k hz enclosure : ni cr plated brass, ip 67 operating temp : 70 degree cent

• Type: Hall Effect Sensor 3144
• Material: Copper
• Color: Black
• Feature: Good Quality
• Country of Origin: India
• Color: Black
• Name: A3144/OH3144/44E/AH3144E Hall Effect Sensor Magnetic Detector for Arduino
• Superior Temp: tability for automotive or industrial applications 4.5 V to 24 V operation, works with most unregulated supplies open-collector 25 mA output, compatible with digital logic reverse battery protection a

Product name: hall effect sensor; model: 3144E Pin number: 3; pin Length: 16mm/ 0. 63 inch Net weight: 2G; package content: 10 x hall effect sensor Size: 19 x 4 x 1. 5mm/ 0. 75" x 0. 16" x 0. 06" (l*w*t); material: electric part Supply Voltage: 4. 5-28V; output current: 25mA   Specification: Main Material: Metal,Plastic Color: Black, Silver Terminal Quantity : 3 Length:13mm/0.51 inch Pin Pitch:1mm/0.04 inch Model Type: A3144 Reverse Battery Voltage : 35V Continuous Output Current : 25mA

• Type: Hall Effect Sensor
• Material: Metal
• Application: Hall Use, HALL effect, Resistivity, and Susceptibility
• Color: Red & Black
• Automation Grade: Automatic
• Brand Name: NanoMagnetics Instruments Ltd.

Design for electric transport and magnetic properties measurements. It can do measurements like, Hall Effect, Van der Pauw, 2-4 contact resistivity, angle depended resistivity, and susceptibility etc. Various units which allows the user to compose the proper measurement setup for exact needs. These instruments are also configurable internally. Systems have their own dedicated automation software written in Labview. 

• Material: Metal
• Application: Automotive
• Color: Black, White
• Thickness: 19.8mm
• Shape: Round

Hall Effect Sensor AH34 is a low noise linear analog output sensor device which opens wide scope of measurements related to displacement, angular position and current ratings. These sensors shows ratio metric property as the output voltage of the sensor is proportional to the applied magnetic field. The AH34 hall sensor is packaged in 3 pin ultra mini SIP, which confers to the industrial requirement for small size, high accuracy and extensive work capacity avoiding any type of mechanical stress. Each sensor has inbuilt BiCMOS monolithic circuit with temperature compensating circuitry and an amplifier for processing low signal and high gain. The device can withstand extreme environment conditions with temperature ranging from -40oC to 150oC. The device is lead (Pb) free and best suited in application of automotive and industrial applications. Package 3 pin-SIP Output Source Current 2 mA Output Sink Current 10 mA Supply Voltage 4.5 to 5.5 volt Supply Current 9 mA (max) Operating Ambient Temperature Range -40o C to +150o C Sensitivity 2.5000 mV/G to 5.000 mV/G (Typ.) Application ·         Automotive,   ·         Current measurement   ·         Angular positions   ·         RPM measurements.

Combined Hall Sensor and Shunt Current Sensor Module HSM-800 The HSM-800 is a redundant dual current sensor module combining precise Cu-Mn shunt- based current measurement and a fully redundant, galvanically isolated Hall sensor. Product Description The HSM-800 is a redundant dual current sensor module combining precise Cu-Mn shuntbased current measurement and a fully redundant, galvanically isolated Hall sensor. Therefore this module provides highly accurate, redundant, and reliable current measurement. Hence, it targets safety-relevant applications according to ASIL standards and ISO26262. Applications include e.g. high voltage battery monitoring, junction box, HEV, EV, and others. Additionally the module is complemented with an ambient temperature sensor allowing to determine the state-of-charge SOC, state of health SOH, and state of function SOF of modern battery-powered equipment.

The Hall Effect Sensor, which we offer, easily transverse an electric current present in the conductor. We make available the Hall Effect Sensor that can seamlessly transverse a magnetic field straight to the current. This Hall Effect Sensor is procured from reliable vendors in the domain. Durability, low maintenance cost and ease-of-installation are features that define the Hall Effect Sensor, which we provide.

Hall Effect Sensors are sometimes referred to as “switches” rather than sensors because of the on-off “digital” voltage signal they produce. Unlike magnetic sensors that produce an alternating current (AC) signal which varies in voltage with speed, Hall Effec – tSensors produce a constant voltage signal that can change abruptly from maximum voltage to nearly zero and back again regardless of engine speed.This produces a square wave output signal that can be easily used by the onboard computer for timing purposes.

• Output: Analog Sensor
• Model Number: HOCS-50...800-15
• Ambient Storage Temperature: -25 to +85 °C
• Output voltage @ IMAX, R= 10kΩ @ 25°C: ± 4 ± 0.04 VDC
• Ambient Operating Temperature: -10 to +85 °C
• Current consumption: 15 mA
• Linearity (Excluding electrical offset): < 1% of IMAX
• Port: Mumbai
• Supply Voltage (±5 %): ± 15 VDC
• Supply Ability: 500 Piece/Pieces per Week
• Usage: Current sensor
• Accuracy @ TA=25 °C: ± 1%

The Hall Effect Magnetic and Proximity Sensor Module can be used to detect the presence (or absence!) of nearby objects such as magnets. This sensor accepts a GND and +5V supply, and has a single digital output which goes low (GND) when a magnetic field is detected. The linear sourcing output voltage is set by the supply voltage and varies in proportion to the strength of the magnetic field. It has a reduced current consumption of only 6 mA typically at 5 Vdc help make this sensor energy efficient.

• Material: Plastic cast, insulating
• Brand Name: Marposs
• Degree Of Protection: IP20
• Weight: 0.170 kg
• Effective Primary Nominal Current: 100 A
• Primary Current Measuring Range: 0 - -+ 200A