Hand Operated Valve Dealers

• Weight: 40-50kg
• Feature: Easy to Operate, Compact Design
• Material: Metal
• Application: Industrial
• Durability: Long Life
• Surface Finishing: Polished
• Resistivity: Rust Resistant

An emerging name in the market, our organization is involved in offering DS2 Series G1-8 Manually Operated Valve within the most lucrative deals. With the assistance of our safe and automatic warehousing system, we are able to store the entire lot of products in a secured manner. The entire lot is cross checked at regular basis for ensuring complete safety of the products.   Features : Compact size Suitable for panel mounting Mounting provision for individual unit  

3-WAY/3-POSITION (CLOSED CENTER) NON-INTERFLOW MANUAL VALVE WITH POSI-CHECK® Application – Single-acting cylinders. Actuation – Lever operated, detent positioned. Functions – Pos. 1 – Oil is directed from pump to cylinder and “holds” with pump shut off; line to reservoir is blocked. Pos. 2 – All oil is open to reservoir through tank line. Center pos. – Cylinder pressure is held; pump should be shut off. Used on these pumps – P460, PA17, PA46, PA55, PA60, PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PE200, PE400, PQ60 and PQ120 series. 10,000 PSI., 3/8" PORTS, 5 GPM MAX FLOW RATE. NOTE: A Pressure Switch and/or Gauge (Analog or Digital) may be attached if desired. NOTE: Also, valve may be remote mounted with a 9510 Subplates. CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) orCounter Balance Valve (No. 9720) in conjunction with the directional valve used in your application. NOTE: Valves 9501, 9502, 9504 and 9507 can have a port blocked or have a closed center position. When a port is blocked and the valve is shifted to the blocked port, the pump will generated excessive heat. An electric or rotary air pump can either be turned off manually or with a pressure switch. Reciprocating air pumps may be adjusted to stall out and stop. NOTE: Gauge ports monitor pump pressure only, not pressure to the hydraulic cylinder(s). IMPORTANT: Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17 pumps. IMPORTANT: When ordering any valve for a PE30 or PG30 series pump, ½” longer mounting screws are required. For valves 9502 and 9520, order four 12001 cap screws. For valve 9576, order four 17428 cap screws.

• Size: Available In Different Sizes
• Pattern: Plain
• Automatic Grade: Manual
• Feature: Durable
• Type: Directional Control Valves
• Finish: Polished

• Description: 2/2 way manually wheel operated Ebonite Lined diaphragm valve. End to end design as per  BS EN 558-1:1995.
• Size / End Conn.: 15 NB to 100 NB / Screwed BSP & Flanged end (ASA 150#, BS 10 Table 'E', 'D', 'F') , For above sizes consult us.
• MOC: STD - IS 210 Gr FG 220 (Cast Iron with Ebonite Lining) Optional - IS 1865 -1991 SG 400/18 (Ductile Iron with Ebonite Lining)
• Diaphragm: STD - Nitrile, EPDM and EPDM backed by PTFE
• Temp.: STD - 80°C Optional - 110°C
• Actuator: STD - Manual - ABS, Cast Iron Wheel

We are the main supplier of this product.

• Size: Available in different sizes
• Material: Cast Iron, Stainless Steel
• Application: Auto Industries, Locomotive Use
• Power: Hand Chain
• Feature: Perfect Grip, Perfectly Designed
•  Number Of Way: 5/2way

Hand Lever Valves are used to operate Pneumatic Cylinders. In the absence of electrical supply, manually operated valves such as Hand Lever Valves are used. The functioning is the same, however, the solenoid coil is replaced by a hand lever, which controls the movement of the spool inside the valve, thereby allowing the air to pass.

Our wide product range also comprises Hand Operated Valves, which are designed and manufactured as per the international standards. These Hand Operated Valves find their wide application in various areas such as for handling slurries, ash, vinegar & molasses treatments in sugar mills and isolation of the flow.

We always remain concerned about delivering a flawless range of products and thus we store the entire lot under secured environment till the final dispatch of the orders. Owing to our well-established set-up in Thane(India), we are capable of catering to the requirements of clients with utter ease.

The hand lever valve are efficient in working without any slightest dysfunction. They are produced by SAMSON in all dimensions and are capable of rugged functioning.  

• Fluid temperature: 20 to 70 degree C
• Viscosity Range: 10 CST to 380 CST
• Normal flow capacity: 32 LPM
• Max flow capacity: 100 LPM
• Working Pressure Port T: 16 Mpa

• Feature: Durable
• Application: Water Fitting
• Pressure: High Pressure
• Material: Cast Iron
• Size: 1.1/2inch, 1.1/4inch, 1/2inch, 1inch, 2inch, 4/5inch, 5/6inch, 6/7inch

• Temprature: -20°C to 80°C For Nitrile Seat
• Body: Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN

We Manufacture Quality Valves of almost all types for a wide spectrum of users in the Process & Chemical,Refineries & Petrochemicals,Fertilizers,Drugs & Pharmaceuticals,Thermal Power Stations, Nuclear & Atomic Power Stations,Textiles,Dyes & Intermediates, Paints & Varnishes, Sugar,Breweries & Distilleries,Soaps & Detergents, Steel Plants,Food & Oil Industry, Solvent Extraction Plants, Sewage, Effluent & Water Treatment, Cooling Water,Ship Yards and Marine Management,Water Works,Pulp & Paper,LPG Bottling Plants, Onshore & Offshore platforms, Slurry & Ash handling.

• Model Number: LFA1, LFA1D
• Type: 5X2
• Design: Spool with Cartridge Type
• Features: Cartridge Type design for Long life. Compact design. Lubrication not essential. The head can rotate 180. 20 Lacs Cycle tested
• Port Size: In/Out - 1/4 BSP & Exhaust – 1/8 Inches BSP
• Media: Compressed Air, Filtered & Lubricated
• Working Pressure Range: 0 - 10 bar
• Ambient/Medium Temperature: 5°- 60° C
• Flow: 1200 lpm
• Materials of Construction: Aluminium, Nitrile, Brass, Polymer

These advantages are especially for large Valves applications. The best and obvious advantages are saving of weight, space and cost. We are also known for Butterfly Valves Manufacturer in India. The maintenance costs are generally down because there is less number of mobile parts and there are no pockets to store fluids.Valves are especially well for the handling of large flows of liquids or gases.

With the Super efficiency of our experienced professionals, we have been able to design and develop a sustainable range of Hand Operated Valves. These high quality valves are fabricated in well segregated premises and by employing advanced techniques. These are manufactured using excellent quality raw material, which is procured from the leading vendors in the market in various designs and shapes as per the customization need of the clients. Features: Reliable Precision Engineering Everlasting performance Sturdiness Compact design Specifications: Type: Spring Return, Detect Type Flow Capacity : 0 to 63, 120 x 300 LPM Pressure Range: 0 to 315 bar/700 bar Mounting: Sub Plate type, Threaded type Model: CETOP 3, CETOP 5 & CETOP 10

• Country of Origin: India
• Size: 1.1/2inch, 1.1/4inch, 1/2inch
• Certification: ISO 9001:2008 Certified
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Feature: Blow-Out-Proof, Casting Approved, Durable, Investment Casting
• Pattern: Plain
• Number Of Way: 2way, 3way, 4way
• Brand Name: Janatics

• Size: 1/2 INCH TO 3 INCH
• Material: STAINLESS STEEL
• Color: Silver
• Condition: New
• Brand: LEISTUNG
• Connection Type: Neutral gases and liquids, high purit y , sterile,aggressive or abrasive fluids
• Power: Manual