HCL Absorber Dealers

• Nominal Size (mm): 80
• Absorber Area (m2): 1.00
• No. Of Tubes/Tube OD (mm): 4/20

This is achieved in a Falling Film Absorber which is essentially a shell & tube heat exchanger in which both gas to be absorbed and absorbing liquid flow co-currently downward with extraction of heat by circulation of coolant in the shell. The abssorbing liquid is circulated through a tank till desired concentration is achieved. The liquid flows at such a rate that the tubes do not flow full of the liquid but instead, descends by gravity along the inner walls of the tubes as a thin film. Obviously, this produces a much greater linear velocity for a giver rate flow than could be obtained if the tube flowed full. The equipment works as a number of water cooled-wall columns in parallel and each tube is provided with distribution system on top to effect uniform distribution of both liquid and gas and also formation of a thin liquid film on the inner surface of the tube.

• Type: Hcl Absorber
• Material: glass
• Certification: ISO 9001:2008 Certified
• Design: Customized
• Condenser Hta: 2.5m2x2
• Cat Ref: AHCL3 - AHCL12
• Country of Origin: India

Our organization is avidly engaged in supplying an exclusive range of Adiabatic Type HCL Gas Absorber at reasonable prices. Working in close coordination with the genuine logisticians, we dispatch the products in the dedicated time.   Process Description : HCL absorption columns are used for absorption of Hydrochloric gas, which statutorily are not permitted to vent into the atmosphere, and to produce the HCI acid. The column is constructed with a series of packed sections, a gas introduction point below that, a condenser on the top, and a cooler at the bottom. Make water is sprayed from the top and acid is collected from the bottom. HCL absorption columns are available in 80DN to 300DN diameter (for the gas rate 10 Kgshr to 300 Kgs hr approx).

• Type: Automatic
• Application: Industrial
• Material: Stainless Steel
• Capacity: 10 - 300 Kg/Hr
• Diameter: 80 - 300 mm
• Surface: Paint Coated

Specifications : HCL absorption columns are used for absorption of Hydrochloric gas, which statutorily are not permitted to vent into the atmosphere, and to produce the HCl acid. The column is constructed with a series of packed sections, a gas introduction point below that, a condenser on the top, and a cooler at the bottom. Make water is sprayed from the top and acid is collected from the bottom. HCL absorption columns are available in 80DN to 300DN diameter (for the gas rate 10 Kgs/hr to 300 Kgs/hr approx). HCl gas can be economically absorbed forming Hydrochloric acid of 30% (w/w) concentration which can be re-used in the main process. Thus this absorption is a pollution abatement as well as a recovery process. The absorption can be done by two different methods : Adiabatic Absorption: This method is suitable when the inerts like air, phenolic compounds etc are substantial. Isothermal Absorption: This method is suitable when inerts like air phenolic compounds, etc ar negligible.

We are engaged in manufacturing Falling Film Type HCL Gas Absorber, which is designed fusing quality materials. This Falling Film Type HCL Gas Absorber requires very low temperature for storage and disposal. Used For Absorption Of Gases Like HCl , Cl2, So2, NOX , and HBr Features No moving partsEase of operationCompact designNo maintenanceCan handle very large gas flow rates as well variable gas flow rates

• Capacity: 5 Kg/Hr to 1600 Kg/Hr
• diameter: 600 mm

The Adiabatic absorber is the simplest form of HCl absorber, which can be operated continuously. Under normal operating procedure, Adiabatic Hydrogen Chloride Absorber produces 30 % HCl. Adiabatic Absorber is a vertically mounted Packed Column. The standard configuration of the adiabatic absorber consists of a suitable Glass Packed Column with internals, coil type condenser & cooler with the necessary drain outlet for the acid. The Hydrogen Chloride Gas enters at the bottom of the column & Water flows from the top of column & flows down through the column.

Hydrogen Chloride gas produced as a by product can be economically processed into Hydro – Chloric Acid by simple Absorption Adiabatic Absorption is the most effective means of production of Hydro – Chloric Acid solution. Under normal operating conditions Hydro Chloric Acid Solution of 30% – 31% strength can be obtained.These absorbers operate, as the name implies, without any heat input into the reaction zone.The gas loading should in no case fall below 50% of the design maximum for adiabatic absorption column to be most effective means of absorption.

HCL absorption columns are used for absorption of Hydrochloric gas, which statutorily are not permitted to vent into the atmosphere, and to produce the HCI acid.

Hydrogen Chloride gas produced as a by product can be economically processed into Hydro – Chloric Acid by simple Absorption Adiabatic Absorption is the most effective means of production of Hydro – Chloric Acid solution. Under normal operating conditions Hydro Chloric Acid Solution of 30% – 31% strength can be obtained. These absorbers operate, as the name implies, without any heat input into the reaction zone. The gas loading should in no case fall below 50% of the design maximum for adiabatic absorption column to be most effective means of absorption. In this process HCL – Gas is absorbed by fresh water flowing down the column . The heat generated by this reaction vapourises approximately 30% of the water that rises to the head of the column with non – soluble components of the gas stream. Hydrogen Chloride streams containing air, water vapour & non – condensable are condensed / absorbed within the column and are returned together with the make up water to the bottom of the column through several packed sections and are passed through heat exchangers for dissicipatcing the heat of absorption before storage. The acid out let temperature is 45° C to 50°.

Our company is a famed Manufacturer, Supplier and Exporter of HCL Gas Absorber from Mumbai, Maharashtra. Our HCL Gas Absorber is highly popular for its superior performance and long functional life. We offer HCL Gas Absorber in quality and sturdy packing and can transport them to any country within the promised time.   Process Description : HCL absorption columns are used for absorption of hydrochloric gas, which statutorily are not permitted to vent into the atmosphere, and to produce the HCL acid. The column is constructed with a series of packed sections, a gas introduction point below that, a condenser on the top, and a cooler at the bottom. Make water is sprayed from the top and acid is collected from the bottom. HCL absorption columns are available in 80DN to 300DN diameter (for the gas rate 10 Kgs/hrto 300Kgs Ihr approx).

HCL absorption columns are used for absorption of Hydrochloric gas, which statutorily are not permitted to vent into the atmosphere, and to produce the HCl acid. The column is constructed with a series of packed sections, a gas introduction point below that, a condenser on the top, and a cooler at the bottom. Make water is sprayed from the top and acid is collected from the bottom.

HCl Absorber, Cylindrical Glass Reactor, jacketed reactors

HCl Absorber

HCl Absorber, Chlorine, selling

HCL Absorbers

HCL Gas Absorber, Graphite Heat Exchangers, Pollution Control Equipment

HCl Absorber