Heat Deflection Temperature Tester Dealers

Programmable, with liquid nitrogen controlThe Benz TR 2200 temperature retraction tester measures the effects of low temperature on rubber, plastic and other elastomeric materials.Meeting and exceeding ISO 2921 and ASTM D-1329, the TR 2200 allows the accurate evaluation of crystallization and the comparison of rubber and rubber-like sample viscosity at low temperatures.  General DescriptionAn operator stretches a sample, often to 50%, 100%, 150% or 200% of the original length, cools it in a bath solution like methanol or silicone grease, then releases the sample and allows it to retract.Windows-compatible Benzwin software, supplied free with the TR tester, allows retraction point calculation and comparison. Readings are presented real-time and saved.A single sample can be analyzed in different conditions, and different samples can be compared.The Benz TR 2200 reports an elastomer's low limit operating temperature. It also details a sample's percentage of retraction at different temperatures. And it allows the determination of a temperature range in which a sample is elastic.The Benz TR 2200 is often used with a Benz BPT 2100, a high accuracy brittlepoint tester, to gauge a materialÍs suitability for low temperature use.A special attribute of the Benz TR 2200 is its ability to be programmed so that the operator can select not only temperature retraction points but the end point of testing, shortening testing time.A standard feature, not an option, is liquid nitrogen control, which results in highly accurate controlled temperatures and reduces operator intervention.Sample lengths changes are determined to an accuracy of ±0.001 inches.The TR 2200 is unique sample holder reduces temperature deviation when a sample is immersed in its bath.Attractively constructed of hard-coated anodized aluminum and stainless steel, the Benz TR 2200 carries an extensive one-year parts and labor warranty.It operates at 110/220 volts, 1 amp AC power and needs only 3 square feet of counter space.

• Type: Heat Deflection Temperature Tester
• Color: White
• Composition: Calcium Lactate 2 gm Potassium Chloride 8 gm Magnesium Sulphate 0.9 gm etc.
• Presentations: 500 g. 1 Kg.
• Dosage: Cow/Buffaloes/Horses - 100-200 gm. lday Calves/Sheep/Goat/Dogs - 20-30 gms.! day.
• Uses: Extreme Heat & Temperature Conditions
• Advantages: Stabilizer Ruman pH To treat dehydration systematic acidosis
• Form: Powder

Composition :Each 200 g. Contains : Calcium Lactate 2 gm Potassium Chloride 8 gm Magnesium Sulphate 0.9 gm Sodium Chloride 1.6 gm Sodium Bicarbonate 1.4 gm Sodium Citrate 6 mg Dextrose 80.1 gm Water Soluble Carbohydrates 96 gm Lacto Bacillus 3000 Sporogenes (Millin Spores) Vitamin C 4 gm   Advantages : Stabilizer Ruman pH To treat dehydration systematic acidosis. Overcomes stress during vaccination, transportation. Helps in repid recovery of Diarrhoea. During Extreme Heat & Temperature Conditions.   Dosage  : Cow/Buffaloes/Horses -  100-200 gm. lday Calves/Sheep/Goat/Dogs  -  20-30 gms.! day. Poultry  -  1 gm.! Litre Water Administer orally with Feed.

• Brand Name: CKE
• Country of Origin: Made in India
• Material: Aluminum
• Surface Finishing: Polish
• Measuring Angle: 360 Degree 
• Weight: 1.5 N and 2.5N scale including

• Temp.Range: 0 to 200ºC
• Rate of rise: Selectable

HDT - Heat Deflection Test Apparatus is used to determine the deflection temperature limit for specific application and comparing the heat softening characteristics of thermoplastic material at persistent load in oil up to 300º C with specified rate of rise.

• Country of Origin: Made in India
• Voltage: 220V
• Frequency: 50Hz
• Phase: Single Phase
• Packaging Type: Box
• Brand Name: Asian
• Display Type: Analog
• Watt: 100W

• Phase: Single Phase
• Brand Name: Techplast
• Voltage: 240 V
• Frequency: 50 Hz
• Material: Mild Steel
• Application: Industrial
• Temperature Range: 250 Degree Celsius
• Power: 3 kW
• Accuracy: +-0.01mm

• Power: 220V, 50Hz, Single Phase
• Feature: Inbuilt Auto tuning function, Precise measurement through Dial Gauge,
• Diameter of Indenter tip: 1mm circular (Flat ended needle)
• Temperature Controller range: Up to 250ºC
• Rate of Heating: 120±10ºC/hr, 50±5ºC/hr
• Weights: 5 Kg
• Testing Medium: Water or Silicone Oil

Heat Deformation - HDT/VSP Tester is a consistent tool useful for determining the ability of a given polymer to bear load at elevated temperatures. Accurate and reliable deflection or deformation is an important component in the plastics industry. MODEL      HDT/VSP-500 Heat Deformation - HDT/VSP Tester is a consistent tool useful for determining the ability of a given polymer to bear load at elevated temperatures. Accurate and reliable deflection or deformation is an important component in the plastics industry. PRESTO Heat Deformation HDT/VSP tester is equipped with indenter which indents the sample under specific load and offers heat deformation and Vicat Softening temperature of plastic or polymer materials. The deflection on the gauge is the measure of deformation of the test specimen.

• Model: HV-EXP4390

Heat Deflection Temperature Tester -The Heat Deflection Temperature of plastic materials is the temperature at which the material deflects by a specified amount under the action of a specified stress. It is determined by supporting a rectangular test specimen over two cylindrical edged blocks and pressing it at the center of the supported span through a cylindrical edged loading tip. The test specimen, along with the supports and the loading frame, is kept in a high temperature bath whose temperature is slowly raised. The temperature at which the test specimen deflects through a predetermined distance is the heat deflection temperature of the material under test civil lab equipments manufacturers. Plastic Films Testing Lab equipment manufacturers,exporters and Plastic Films Testing Lab suppliers

NAUGRALABS LABORATORY PRODUCT NAME: HEAT DEFLECTION TEMPERATURE TESTER FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-370005 Description and Specification for Lab Tenders Heat Deflection Temperature Tester For Testing Lab Workshop.  Heat Deflection Temperature Tester -The Heat Deflection Temperature of plastic materials is the temperature at which the material deflects by a specified amount under the action of a specified stress. It is determined by supporting a rectangular test specimen over two cylindrical edged blocks and pressing it at the center of the supported span through a cylindrical edged loading tip. The test specimen, along with the supports and the loading frame, is kept in a high temperature bath whose temperature is slowly raised. The temperature at which the test specimen deflects through a predetermined distance is the heat deflection temperature of the material under test civil lab equipments manufacturers  Plastic Films Testing Lab equipment manufacturers,exporters and Plastic Films Testing Lab suppliers

• Brand Name: Digicon
• Voltage: 220V, 240V
• Display Type: Touch Screen
• Packaging Type: Wooden Box
• Temperature Capacity: Medium Temperature
• Type: Heat Deflection Temperature Tester, Vicat Softening Tester
• Frequency: 50/60
• Temperature Range: Up To 225 Deg C
• Phase: Single
• Accuracy: 0.1 Deg C
• Country of Origin: India
• Operating Current: Single Phase
• Warrenty: 1year
• Watt: 3 Kw

Heat Deflection Temperature Tester, Color Matching Cabinet, Toxicity Analyzer

Heat Deflection Temperature Tester, Bursting Strength Tester, colorimeter

HDT or VSP, Universal tensile tester, Izod Charpy tester, Digital Density

Heat Deflection Temperature Tester, Multi- Cell Aging Oven