Heat Transfer Unit Dealers

• Voltage: 330 V
• Weight: 50-120 kg
• Plate Thickness: 0.5/0.6/0/8/1 mm
• Usage: Industrial

Range of Experiments to be Carried Out• To visualize the process of nucleate and film boiling on the heater and condensation on water cooling coils• To calculate Critical Heat Flux during process• To calculate heat release during condensation• The experiments can be conducted at various values of input & calculation can be made accordingly

Boiling Heat Transfer Unit Technical Description The transparent process tank makes it possible to clearly observe the evaporation process at the heated cylinder. The cylinder is used as a model to demonstrate a fire tube heated from the inside. An integrated water-cooled condenser allows for a continuous boiling process. The special liquid used evaporates at low temperatures. Sensors provide all relevant data. The measured values are indicated on digital displays and can also be transmitted directly to a PC. A data acquisition card and software are included. A supply of water is required

• Stirrer For Bath: Stainless Steel Impeller with Shaft Coupled to a FHP Motor
• Bench Area: 15 m x 15 m
• Electricity Supply: 1 Phase, 220 V AC, 1 kW
• Water Bath: Material - Stainless Steel Capacity-8 Lit

• Brand Name: SLISCO
• Place of Origin: India
• Heat Transfer Lab: Open Pan Evaporator
• Heat Transfer Lab: Single Effect Evaporator
• Heat Transfer Lab: Double Effect Evaporator
• Heat Transfer Lab: Plate Type Heat Exchanger

Product Description:The Apparatus Consists Of A Small Test Cylinder. The Cylinder Is Heated By A Constant Temperature Water Bath, Till Steady State Is Reached. During Heating, Temperature Of The Cylinder Is Function Of Time And Hence, Heating Of Cylinder Is Under Unsteady State Heat Transfer.The Temperature Of Cylinder Is Measured With The Help Of Temperature Sensor Inserted In The Centre. The Hot Water Bath Is Provided With A Heater And Is Controlled By Digital Temperature Controller. An Agitator Is Also Provided To Maintain The Constant Bath Temperature

• Type: Heat Transfer Film
• Material: Bopp
• Thickness: 1.5-2micron, 2.5-3micron, 3.5-4mmmicron, 4.5-5micron
• Color: Golden, Green, Grey
• Pattern: Plain
• Texture: Hard, Soft
• Feature: Eco Friendly, Fine Finish, Good Quality

The apparatus consists of a small test cylinder. The cylinder is heated by a constant temperature water bath, till steady state is reached. During heating, temperature of the cylinder is function of time and hence, heating of cylinder is unsteady state heat transfer. The temperature of cylinder is measured with the help of temperature sensor inserted in the center. The hot water bath is provided with a heater and is controlled by digital temperature controller. An agitator is also provided to maintain the constant temperature.   Electricity Supply: 1 Phase, 220 V AC, I kw Bench area of 1.5m x 1.5m

ALPHA CHEM-1312  Fluidisation And Fluid Bed Heat Transfer Unit Application of fluidised beds is more widespread in industry than is usually appreciated, covering such diverse fields as power generation to food processing. The objective of the unit is to investigate the gas flow through a fixed and fluidised bed and to measure the heat transfer rate and coefficients for comparison with convective heat transfer rates in air.   Fluidisation takes place within a transparent chamber and the range of bed material supplied can be rapidly changed. Alternative locally sourced bed materials and air distributors can be easily utilised for student project work.   Fluidised Bed designed for educational studies and using air as the fluidising medium. The unit incorporates a glass chamber containing the bed material and an electric heater for heat transfer studies.   High quality glass reinforced plastic on which the following components are mounted:   Variable Transformer to vary the heater power input.   Volt and Ammeter to indicate the heater power input. Ranges 0 to 250 V amd 0 to 3 A.   Flow Meters to measure air flow through bed. Range 0.15 to 3.5 litres/sec.   Digital Thermometer to indicate the temperatures of heater surface, air inlet and probe. Resloution 1ºC.   Manometer to measure pressure drop through bed.   Safety Features include fusing and earthing of all components and heater temperature controller.   Experiments :   Observation of the behavior in a fluidised bed of a wide range of granular maerials, from onset of fluidisation to entrainment.   Measurement of air flow and pressure drop through a variety of granular materials, as packed and as fluidised beds.   Investigation of the effect of distributor design on bed behaviour.   Investigation of the effect of:   Superficial velocity   Depth of immersion   particle size   on surface heat transfer coefficient for a hot surface in a fluidised bed   Demonstration of separation by article size and density.   Specifications :   Column : Material Borosilicate Glass Dia. 80 mm. Total Length 500mm.   Cyclone Separator : Material Stainless Steel, Compatible Capacity with collector.   Air Circulation : By forced draft fan, Arrangement is done vary the air flow rate.   Heating Chamber : Compatible capacity   Heater : Nichrome wire heater   Temperature Sensors : RTD PT-100 type.   Control panel comprises of :   Digital Temp. Controller : 0 199.9°C (For Hot Air) Standard make on/off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus

Heat transfer unit, We also manufacture the equipments and control systems for sugar industries mainly mill automation, boiler instrumentation, prd stations and embibition water control system.

Boiling Heat Transfer Unit, Floating Carriage Diameter Micrometer

UNSTEADY STATE HEAT TRANSFER UNIT, Epicyclic Gear Train Apparatus

heat transfer unit

UNSTEADY STATE HEAT TRANSFER UNIT, Ice Plant Trainer, Vibration Monitoring

UNSTEADY STATE HEAT TRANSFER UNIT, Beam Apparatus, Ice Plant Trainer

Two Phase Heat Transfer Unit, Oil Hydraulic Trainer

UNSTEADY STATE HEAT TRANSFER UNIT, Test Tubes Brushes, Pelton Turbine

UNSTEADY STATE HEAT TRANSFER UNIT, Ice Plant Trainer

Unsteady State of Heat Transfer Unit, Losses in Pipes Apparatus

heat transfer unit, Finned Tube Heat Exchanger, MS Finned Tubes

UNSTEADY STATE HEAT TRANSFER UNIT, Bell Jars, Heat Pipe Demonstrator