Waste Heat Recovery System
15,000,000 Per set
1 Piece (MOQ)
WASTE HEAT RECOVERY is a process of recovering ENERGY from waste process outputs. These are custom built equipment or systems designed as per the waste heat available and the process heat load. • These are custom built equipment as per the type waste heat available and the process heat requirements. A detailed study of the client's system is required. • These systems can be designed to recover waste heat from high temperature flue gases of furnaces , DG sets, boilers or any other heat source. • The waste heat recovery can be designed in shell and tube type or water tube type design based on the operating pressure of the system. SMOKE TUBE TYPE WASTE HEAT RECOVERY SYSTEMS : • Package type boilers is an internal furnace Boiler with a three pass, fully wet back & smoke tube type design. The fuel is charged through a charging door to keep the fire going. Package type is designed to provide low cost heating with minimum operational complexity. • Due to proper shell or steam drum diameters, steam volume is more & hence better steam quality. • Steam Quality is better as Properly Designed Drum Internals are Provided. • Provided with accessories like Economiser, Deaerator Tank etc. as per requirement for better performance of the Waste Heat Boiler. • Capacity and Working Pressure of the Waste Heat Recovery is considered as per Customers requirement. • Heat Exchangers and Waste Heat Recovery Boilers are especially made as per codes like IBR 1950 with its Latest Amendments/TEMA etc.
Heat Recovery Chiller
345,000 Per Piece
1 Piece (MOQ)
Heat Recovery Chillers are highly efficient and allow an effective transfer of heat. These are largely used in diesel engines. Our offered range of chillers are manufactured using top quality raw material and components that are sourced from trusted and authentic vendors of the industry. Due to their exceptional performance, robust construction, easy installation and long life, these chillers are widely admired in the industry. Apart from this, we provide these Heat Recovery Chillers in numerous technical specifications at market leading rates
Best Deals from Heat Recovery Systems
Condensate Heat Recovery System
150,000 Per Piece
Effluent Waste Heat Recovery System
1,000,000 Per Piece
1 Piece (MOQ)
Texfab waste heat recovery from dyeing effluent system can recover upto 85% heat from effluent discharge by using a high efficiency heat exchanger for heating incoming process water or boiler feed water upto 85°C.Advantages: Cost savings due to reduced steam requirement upto 35% (varies according to difference in water temperature and water consumption). Due to reduced temperature of effluent discharge, no need to cool it before treatment. Hence savings on waste water treatment cost and cooling tower. By using hot water to wash, improvement in dyeing quality of yams and fabrics Using hot water in process increases productivity by reducing water heating time. Salient Features: All parts in contact with dye liquor/ water are made of stainless steel 316/316L High efficiency heat exchanger (upto 85%). Aeration device and filter cleans adhesion substances (manual/Automatic) to keep the system clean and efficiency high. The system consists of stainless steel vacuum containers, centrifugal pump, filter, electrical control panel, back purge cleaning system & master controller that controls the whole system and keeps record of heat energy recovered.
Heat Recovery System
100,000 - 1,500,000 Per Piece
As one of the leading Suppliers, we keep our quality in synchronization with our reputation and offer the best Heat Recovery System to the buyers. The wide assortments of products we offer are strictly as per the globally accepted norms.
Waste Water Recovery Systems
Get Price Quote
1 Piece (MOQ)
Mobile Oil Spill Recovery Unit
650,000 - 1,800,000 Per piece
1 Ton (MOQ)
The McRAYGOR's Mobile Oil Spill Unit (Mc MOSRU ® ) is Vehicle Mounted Suction Unit that is used to create a vacuum for syphoning out oil, water, grit, liquid hydrocarbons etc. from slope tanks and leaking pipelines besides various others. The unit shall be capable of syphoning out material from a depth of 9 meters. The unit shall be such that 1 driver assisted by two helpers shall be adequate for all operations of the unit.The above equipment shall be mounted on chassis like TATA / ASHOK Leyland / MAHINDRA / Eicher or equivalent. Bidder shall furnish full details of vehicle chassis. The standard tools accessories and spares supplied with the chassis shall be handed over to the client at the time of delivery of the unit. The Bidder shall make arrangements for mounting equipment on the chassis according to the rules laid down by the Regional transport Office, and loads recommended by the chassis manufacturer on the front and rear axles.
Condensate Recovery Pump
100,000 - 200,000 Per Piece
1 Piece (MOQ)
Heat Recovery System
Get Price Quote
We are engaged in manufacturing and supplying of premium quality Heat Recovery System. Our range of heat recovery system is manufactured using high quality basic materials and is effectively used in various industries.
Oil Recovery System
365,000 Per Units
Heat Recuperator
Get Price Quote
Industrial Recuperator
Get Price Quote
We provide Recuperator that is widely used in various industries for utilization of waste heat from thermic fluid heaters and boilers. When allied with coal, it ensures saving of coal consumption up to 25%. Our Recuperators that preheats the combustion air from fuel gases to a temperature ranging from 250-350oC recycles the waste heat back to the furnaces saves up to 12-15% of furnace oil. The usual payback period on installation is just 5-7 months.
vapor recovery systems
Get Price Quote
We are deeply ingrained in Visakhapatnam(India) and carved a niche for ourselves by offering the finest products at very affordable rates. Our packaging professionals ensure that the products enclosed in the package are protected from vibration, shock, compression, temperature and various other external factors.
Industrial Recuperator
Get Price Quote
A recuperator is a special purpose counter-flow energy recovery heat exchanger used in Reheating Furnace & positioned within the flue exhaust gas streams to recovery the heat. Generally, they are used to extract heat from the exhaust gases and use it to preheat air entering the burners. In this way we can use waste energy to heat the air, offsetting some of the fuel, and thereby improves the energy efficiency of the Reheating Furnace. Type of Recuperator : 1. Two pass recuperator 2. Four pass high temperature heavy duty recuperator
Hydrophobicity Recovery Test System
Get Price Quote
Condensate Flash Heat Recovery System
Get Price Quote
1 Piece (MOQ)
Energy Recovery Wheels Hrws
25,000 - 500,000 Per
1 Piece (MOQ)
Waste Heat Recovery Equipment
50,000 - 5,000,000 Per Sets
1 set (MOQ)
Heat Recovery System
150,000 Per Piece
1 Piece (MOQ)
0.0
Website
Industrial Waste Heat Recovery System
Get Price Quote
Graded among the top suppliers of Industrial Waste Heat Recovery System, we can deliver the product at inexpensive prices. Raw materials are feedstock for the finished products and thus it becomes crucial to source these inputs only from certified vendors. So, as a reliable name, we do the same.
0.0
View Profile
heat recuperators
Get Price Quote
Abrasive Recovery System
Get Price Quote
Features: Maintenance free Simple to operate Longer service life Hassle-free working Abrasive Recovery System:In open air blasting, recovery of abrasive material is very tedious, time consuming and costly task and also the efforts do not result in efficient recovery. In Blast Room System having appropriate abrasive recovery system the task becomes very easy and cost effective resulting in saving material and operation cost. Recovery System performs two functions Catch the media for delivery to a recovery point. Transport the media to abrasive cleaner for cleaning before transferring to blasting machine. Abrasive Recovery System (Mechanical) :This system has perforated floor, screw conveyor, bucket elevator and abrasive cleaner. It is suitable for heavy weight abrasives.
Heat recovery system design
Get Price Quote
Thermal design of heat / waste heat recovery unit to improve energy efficiency and thus reduce energy consumption as well as GHG emissions. Evaluate possibility of various design option - Single or two pass on flue gas side, horizontal / vertical tube arrangement - based on thermal and hydraulic design. Material selection to suit the requid operating conditions. Mechanical design of unit. Structural design for non-pressure parts and support arrangement. 3D modelling of complete unit alongwith support structure.
condensate recovery system
160,000 Per Units
0.0
View Profile
Industrial Recuperator
Get Price Quote
Our range of recuperators is perfect for preheating the combustion air by utilizing waste heat. We are also one of the few names to offer premium recuperator system at competitive prices. Designed in accordance to air/fuel ratio, it consists of a recuperator that is selected according to air/fuel ratio the shell and tube type. We are manufacturing all type of Recuperator for steel plants and Sodium Silicate plant to save fuel. These heat exchanger systems can be installed within the supply/exhaust air streams of an air handling system of an industrial process, in order to recover the waste heat that can again be utilized in operations. Our high performing energy conservation devices are designed as per latest industrial specifications.
0.0
View Profile
condensate recovery system
50,000 Per Set
0.0
View Profile
heat recovery wheel
Get Price Quote
The thermal wheel is used to recover the energy from the exhaust air and subsequently bring down the overall cooling load. The thermal wheels are air to air rotary heat exchanger and can recover energy up to 80% without spoiling the IAQ. The heat wheel can recover both the sensible as well as latent heat thus reducing the load on the main cooling coil by around 30 % Two basic types of Wheels are available. Sensible heat recovery wheel – for sensible heat recovery only Enthalpy heat recovery wheel – for Sensible and latent recovery The thermal wheel is a revolving cylinder divided into a number of parallel flutes.
0.0
View Profile
condensate recovery system
Get Price Quote
We offer Steam or Air Pressure Powered Condensate Recovery Pump . along with Flash Vessel and interconnecting Valves and fittings. This unit is designed to pump hot condensate back to feed water tank , thus saving the heat of the condensate and increasing the overall efficiency of the system.
0.0
View Profile
steam condensate recovery system
Get Price Quote
Association with trusted vendors enabled us to meet the quality expectations of the clients. We source only premium-grade raw materials from the reliable sources after complete checking. We frequently keep a check on the storage space to ensure that it is well-maintained by the experts. We have installed the latest machines and leading technologies to save products from spoiling.
0.0
View Profile
Abrasive Recovery Systems
Get Price Quote
1 Piece(s) (MOQ)
Murzello manufactures the following Equipment for Abrasive Recovery: - Mechanical Recovery - Vacuum Recovery
0.0
View Profile
Post Free Ad
