Heavy Duty Motors Dealers

• Output Range(KW): 187 to 2000
• Pole: 6/8/10
• Frame Size: 400 to 710
• Rotor Type: Wound
• Voltage(V): 415/550/690/3300
• Frequency(Hz): 50/60
• Insulation: F/H
• Enclosure: IP23
• Cooling: IC01
• Mounting: IM1001
• Standards: IEC:34-1/IS:325

• Country of Origin: India
• Type: Heavy Duty Gears
• Brand Name: ELECTRONIC SPICES
• Working voltage: 12v
• Shaft diameter: 6mm
• The overall length of the motor: 8cm

The metal gears have the best wear and tear properties. The gearbox is tightly sealed and lubricated with lithium grease and requires no maintenance. The shaft is built from high resistance steel. The plastic body is strong enough to work with heavy loads. No more than 12V current is required to operate this motor. The torque range for this motor is 5kg per cm approximately. Advantages Heavy motor for better performance Well functionally lubricated with lithium grease The plastic body can withstand high room temperature Working voltage is also very low High power torque

• Type: Single/Double acting
• Power Source: Electric
• Bore: 50-500 mm
• Stroke: 25-3000 mm
• Working pressure: 200 bar
• Mounting: Flange, Trunion,Clevis, Pivot, Foot Etc.

Hydraulic cylinder is a linear motor, which moves forward and backward directions when pressurized with hydraulic pump. And giving a force push and pull. Force is calculated (FORCE=PREESURE XAREA OF PISTON.) F=PXA (PUSH FORCE) F=PX (A1-A2) (PULL FORCE) A1 =PISTON AREA, A2= ROD AREA Cylinders Are built in assembling the fallowing parts Barrel carbon steel barrel made out from seamless pipe which are honed/roller burnished pipe To finish 4-16 microns surface finished. Piston/piston rod piston rod are made out from EN 8, which are ground and hardchrome plated to increase the life of seals. Seals seals are of different material like NBR, PTFE, POLYURETHINE ETC depending on applications. END CAP ARE also made out mild steel IS 2063. Mountings different type mounting as per fitting requirement like. Front flange, back flange, trunion, pivot mounting.

We are among the prominent names in providing the best heavy duty induction motor. The heavy duty induction motor is manufactured by following a quality-oriented process. The heavy duty induction motor is made from quality components, which make it durable. The heavy duty induction motor is priced at leading market prices. range 20w up to 50hp why our heavy duty induction motor? efficientdurablelow maintenancereliable operation.

• Material: Stainless Steel
• Power: 10 KW
• Number of Poles: 4 Pole, 6 Pole
• Speciality: Robust Construction, Easy To Use, High Efficiency
• Water Capacity: 40 LPM, 60 LPM
• Overall Length: 10-15 Inch

Designed basically for heavy duty use with driven machine imposing overloads and severe mechanical shocks and vibrations. These motors are equally suitable for smooth constant loads since the motors are also designed with high efficiency and power factor. Because of optimum utilisation of materials, with improved ventilation techniques the motors are 10 – 15% lighter in weight and yet more rugged because of their inherent special construction. Because of high Pull Out Torque and inherent thermal margin kept for high slip operation (with suitable external resistance) these motors are ideally suited for rerolling mills and cane cuttercane crushercane levellercane fiborizer applications pertaining to sugar industries. Because of high efficiency and power factor these mtors are also suitable for pumpfan compressor applications.

• Type: Geared Motor (Unit with Motor) Gear Unit (Without Motor) Gear Unit with input shaft
• Service life: Long
• Performance: Optimum
• Range: Up to 90 kW
• Operation: Easy to use

We have a team of expert quality analysts that stringently checks each and every stage for ensuring quality products at buyer's end. As a dependable name, we make sure that our products are of excellent quality. To make it possible, we use only quality-approved and certified raw materials sourced from reliable vendors.

• Power: 220 V AC Supply
• Mounting Type: Foot Mounted
• Product Type: AC Motor
• Brand: MASTERZ (Made in India)
• Motor Power: 2 HP (1.5 kW)
• Electricity Connection: Single Phase
• Frame: 100S
• RPM: 1380
• Class: B
• Body: Sheet Metal
• Winding: Copper

• Motor Frame Size: 112M, 132S

Shock-absorbing cast iron housings EN-GJL-200 (GG20) and reinforced drive end shields made from robust ductile cast iron EN-GJS-400-15 (GGG40) ensure maximum resistance against mechanical stress. Individual project-based winding adaption possible. Natural convection cooling (IC410), totally enclosed design.

• Phase: Single and three phase
• Power: 2-3 HP
• Features: Rugged construction, Durable, Easy usage
• Body Enclosure: Metal
• Motor Brand: JS
• Motor Voltage: 2Kw
• Speed: 2800 rpm

• Type: Three Phase Motors
• Voltage: 200-240 V
• Power: .1 KW TO 10 KW
• Phase: Three Phase
• Usage: industrial
• Speed: 2800 To 3000RPM
• Power Source: dc

Electrical E-8 Student Kymograph with special heavy duty motor, oil lapped gear systems, speeds from 0.12 mm/sec to 640 mm/sec, in 8 steps, jerk free running, instantaneous start & stop clutch. Stainless steel spindle with screw lift 15 x 15cm cylinder with levelling screws, pilot lamp, plug & cord.  

• Ambient Temperature: 0 to +45°C
• Relative Humidity: Up to 100%
• Frequency: 50Hz. ±5%

The Kirloskar Electric organization comprises nine manufacturing locations and 34 sales offices spread across the country. We have a large network of spare parts dealers and service centres. This enables us to provide premium products, exemplary systems & services at competitive rates to our clients.

• Output Range(KW): 187 to 2000
• Pole: 6/8/10
• Frame Size: 400 to 710
• Rotor Type: Wound
• Voltage(V): 415/550/690/3300
• Frequency(Hz): 50/60
• Insulation: F/H
• Enclosure: IP23
• Cooling: IC01
• Mounting: IM1001
• Standards: IEC:34-1/IS:325

• kW Range: 1.5 to 970 kW
• Frame Size: 802 to 824

We are manufacturing is mill duty motors We are a technological driven organization and excel in providing quality solution for our customer to suit their specific requirement.

• Output Range(KW): 187 to 2000
• Pole: 6/8/10
• Frame Size: 400 to 710
• Rotor Type: Wound
• Voltage(V): 415/550/690/3300
• Frequency(Hz): 50/60
• Insulation: F/H
• Enclosure: IP23
• Cooling: IC01
• Mounting: IM1001
• Standards: IEC:34-1/IS:325