High Temperature Chain Oil Dealers

• Appearance: Bright & Clear
• Brand Name: HP
• Packaging Type: Drum
• Form: Liquid
• Application Areas: Lubrication of Chains,Chain Drives & Stentors Exposed to High Tempertaures upto 200 ºc
• Packaging Size (litres): 7.5L, 20L, 210Lt

Special Features : Synthetic lubricant used in textile and other industry for lubrication of chain drives and stentors. Particularly suitable as high temperature chain lubricant.

• Grade: Indsutrial
• Application: Automotive
• Form Type: Liquid
• Color: Yellow
• Feature: Extreme Pressure
• Pack Size: 1-15kg

We are offering high temp. Synth chain oil. spel synth chenol 100, 180,220,320.

• Packaging: 5 Liter - 20 Litres - 200 Litres
• Shelf Life: 24 Months from Date of Manufacture in Sealed Condition.

Applications High speed stenter frames in textile industry, glass works, paint booths, automotive assembly lines, varnish curing booths, open chains in industry, steel plants, paper and plywood manufacturing units, ceramic processing plants, latex manufacturing plants, lubrication of all chains, clips, bearings. Benefits \n\nExtremely wide service temperature range from -10°C to +250°C\nVery good extreme pressure properties enhance load carrying abilities and reduces frictional wear\nExtremely low evaporation rate at high temperatures\nDue to its absolute synthetic formulation, there is no carbon or resinous deposit even at high temperatures\nMinimised deposit formation reduces cost related to chain cleaning such as labour, production loss and downtime\nLower evaporation rate reduces consumption and allows for extension of lubrication periods thereby cutting down on lubrication costs\nProvides superior lubrication and protection even when subjected to high temperatures and humid conditions\nDue to superior lubrication, power requirements are reduced resulting in both lubricant as well as energy savings\nCost savings due to reduction of parts premature wearing out and replacements are also greatly increased\nGood adhesive properties and water resistant\n\nMethods of Application For optimal lubrication and adhesion, clean and degrease the surface of all previous residues, lubricants or contaminants with JETEX DG-50 heavy duty degreaser. Apply to clean surface by regular oiling methods i.e. by brushing, spraying, dipping or drop feed oiling mechanisms. Allow time for lubricant to penetrate and excess lubricant to drip off before restarting operations. For new chains: Thoroughly clean prior to applying this lubricant. It is recommended to keep new chains dipped in the lubricant for 30 minutes to ensure complete penetration to all innermost points. Avoid excessive use. Do not mix or dilute with other oils or grease. Use as per instructions laid down in manufacturers manual. Replace cap after use.

• Packaging Type: Bucket
• Grade: Lubrall Chaingard 250
• Brand Name: Lubrall
• Packaging Size: 5
• Base Oil: Synthetic
• Flash Point: 300 +

Benefits:          • Clean lubrication with minimum evaporation loss          • Superior anti wear property and superior oxidation stability which extends the chain life     Applications:          • High temperature fluidity to reduce generation of sludge             formation          • Does not drip off          • Most compatible with paints

• Carbon Residue: NIL
• Evaporation loss 200°C: Less Than 1.5% By Weight
• Packaging Type: Bottle
• Flash Point: Above 280°C
• Colour: Pale Yellow
• Density: 0.965
• Viscosity@40°C: 180-210 CST
• Pour Point: -25°C

Applications Textile Stenter Machines Plywood and Paper manufacturing units Glass works and foundries Ceramic and Latex Plants Paint & Varnish curving ovens Chains operating under water & steam attack   How To Apply Clean and de-grease chain completely of old grease and Varnish residues. Apply the lubricant initially for around 30 minutes to allow complete penetration to all points, Re-Lubricate as necessary. Do not mix with other lubricant or solvents.

• Packaging Type: Barrel
• Country of Origin: Made in India
• Form: Liquid
• Brand Name: Altrol
• Packaging Size: 210 Litres
• Usage/Application: Automobile

• Brand Name: OKS
• Usage/Application: industrial
• Unit Pack Size: 30 Ltr

• Packaging Type: Bucket
• Brand Name: Molykote
• Base Oil: Synthetic
• Flash Point: 277C
• Usage/Application: For chain lubrication in ovens,kilns etc
• Temperature Range: Upto 250C

• Brand Name: OKS
• Base Oil: Synthetic Oil
• Solid Lubricants: MoS2
• viscosity at (40 DegreeC): 240 mm2/s
• Viscosity Class: 220 ISO VG class
• Pour Point: -30 DegreeC
• Flashing Point: > 250 Deg C
• Operating Temperature: -30 To 250 Deg C
• Color: Black
• Density: 0.9 g/cm3
• Wear SRV: 0.0017 min
•  :  

High Temperature Synthetic Chain Oil, Cng Engine Oil

Insulating Varnish Coating, Belt Dressing Spray

High Temperature Synthetic Chain Oil, Half Pearl Beads, Open Gear Lubricant

tooling dies, Plastic Injection Mould Dies, Depressed Centre Wheels

High Vacuum Grease, Automotive Oils, cylinder oil, Lithium Grease