High Voltage Electrical Isolator Dealers

• Material: Aluminium
• Color: Brown
• Automation Grade: Automatic
• Rated Voltage: 11kv,33 kV,66 KV,132 KV,220 KV
• Type: Insulator,Horizontal / Vertical
• Country of Origin: India
• Phase: Three Phase
• Current: 400Amp - 1250 Amp

• Color: White, Red
• Rated Current: 40,63,100A
• No. of Poles: Four Pole
• Feature: Durable, Fine Finishing
• Frequency: 50Hz

Micron isolator helps separate any electrical component from its system while the system is offline or online. A mechanical switch isolates a particular fraction of the circuit when its opening is required in a no-load condition. The Isolator should not be opened when the current is flowing through the line. The isolators are placed on both sides of the circuit. Thus, circuit breaker repair can be done with ease and no risk. Technical Information Standard Conformity : IS/IEC 60947-3 Rated Current (In) : 40, 63, 100 AMP Rated Voltage (Un) :415V AC Rated Frequency : 50 Hz Rated Insulation Voltage (Ui) : 660 V Rated Impulse Voltage (Uimp) : 4 kV Dielectric Strength : 2000 V for 1 Minute Energy Limiting Class : Class 3 Ambient Temperature(˚C ) : -5˚ to 55˚ Degree of Protection : IP20 Mounting : Snap on DIN rail at (35mm x 7.5mm) Connecting Terminals : 25mm²/35mm² Features Switch disconnector with independent manual operation. CE marking fulfils the requirement of Global Standard. Environment friendly, meets the ROHS compliance as defined by the European Standard. Shock Proof: Finger and Hand touch safe. All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact. Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving. Bi-connect terminals at both sides giving a choice of using either a busbar or a cable to make the connection. Positive Isolation Suitable for Residential & Commercial applications.

• Type: Galvanic Barrier
• Material: ABS
• Application: Electrically Isolates Pressure And Level Transmitters From Unregulated Circuits For Intrinsically S
• Certification: YAS
• Color: BLUE
• Condition: New
• Brand Name: DWYER USA
• Raw Material: ABS

galvanic barrier series mtl5541 galvanic barrier intrinsically safe isolators for hazardous locations the series mtl5541 galvanic barrier provides intrinsically safe isolation for communication with dwyer® transmitters approved for use in hazardous areas. This galvanic barrier eliminates the need for a high integrity earth ground required when using shunt type diode type safety barriers. Din rail mounting and plug-in signal and power connectors simplify installation and maintenance. product applications electrically isolates pressure and level transmitters from unregulated circuits for intrinsically safe applications modeldescription mtl5541galvanic barrier specifications hazardous area input:signal range: 0 to 24 ma (including over-range); transmitter voltage: 16.5 v at 20 ma. safe area output:signal range: 4 to 20 ma; under/over-range: 0 to 24 ma;load resistance: 0 to 360ω @ 24 ma, or 0 to 450ω @ 20 ma; current sink: 600ω max.; maximum voltage source: 24 vdc; output resistance: > 1 mω. power requirement:20 to 35 vdc. response time:settles to within 10% of final value within 50 µs. current consumption (20 ma signal):51 ma @ 24v. maximum power dissipation (20 ma signal):0.7 w @ 24 vdc, 1.0 w @ 24 vdc. isolation:250 v rms, tested at 1500 v rms minimum, between safe- and hazardous-area terminals; 50 v between safe-area circuits and power supply. transfer accuracy at 68°f (20°c):better than 15 µa. led indicator:green: power indication. temperature limits:operating: -6 to 140°f (-20 to 60°c); storage: -40 to 176°f (-40 to 80°c). temperature drift:< 0.8µa/°c. humidity:5 to 95% rh. mounting:t-section 35mm din rail (7.5 or 15mm) to en 50022. terminals:accommodate up to 2.5 mm2 stranded or single-core.safety description:vo= 28 v, io= 93 ma, po= 651mw, um= 253 rms or dc. weight:150 g.   features designed to mount on most standard din rails approved for use in hazardous areas   accessories model numberdescription a-360aluminum din rail   related products series mtl5041/5045 galvanic barrier series mtl5041/5045 galvanic barrier series mtl7706/7787 zener barrier series mtl7706/7787 zener barrier

• Material: SS/CRCA Fabricated
• Color: Silver
• Country of Origin: India
• Rated Voltage: 250-415 v
• Shape: Rectangular
• Mounting Type: Horizontal

Motor Isolator SS304 Thermoplastic Polycarbonate A motor isolator is a device utilized to disconnect and separate an electric motor from its power source. To provide a secure and useful means to carry out maintenance, repairs, or inspections on the motor and its linked electrical circuits. Motor isolators can be prepared from a variety of materials, including stainless steel and thermoplastic polycarbonate. It gives separate benefits depending on the environment and application. Pace Technologies is here with the Motor Isolator SS304 Thermoplastic Polycarbonate, serving the needs of the buyers. Polycarbonates are strong, inflexible, hard, tough, clear engineering thermoplastics that can keep inflexibility up to 140°C and hardness down to -20 °C, or in special grades even lower. Polycarbonate is largely used for electronic applications that exploit the collective security of its features. A good electrical insulator with flame-retardant properties and heat resistance is used in products linked to power systems and telecommunications hardware. SS/CRCA Fabricated products are available with us. It works on a voltage of 250–415 volts. If you have more questions and queries about the Motor Isolator SS304 Thermoplastic Polycarbonate, you can contact our team for more information.

• Power: 160 kVA to 2500
• Frequency: 50/60 Hz
• Output Voltage: Up to 33 kV
• Usage: Electrical industry
• Accuracy: 0.1% Transfer Accuracy
• Power Source: Electric

We make use of the quality basic material in the production of the entire range. The material is thoroughly checked by our quality experts before procurement from vendors. We are acknowledged for meeting the urgent requirements of the clients even on short notice as we are supported by capacious warehouse and streamlined inventory management system. Transmission Isolators have a smooth and polished surface with excellent dimensional accuracy and a long service life.   

• Material: Aluminium
• Rated Voltage: 33 KV
• Rated Current: 1250 A
• No. of Poles: Three Phase
• Brand Name: Jaipuria Brothers Electricals Private Limited
• Frequency: 50 Hz

• Driven Type: Electric
• Power Type: DC
• Power: 20-25Kw
• Application: Industrial
• Feature: Durable, High Performance
• Phase: Three Phase
• Country of Origin: India