Hose Valves Dealers

• Material: Brass
• Use: For Fire Safety
• Media: Water

Hose valves are utilized to regulate the flow of liquid in various hydrant or wash-down station applications. we are offered as in-line globe, angle globe and gate type hose valves. We also stocks metric hose valves with all types of coupling end types as well as a variety of hose valves for many different hydrant or wash-down station applications.

• Material: Brass, Mild Steel
• Color: Red
• Size: 1.5 Inch
• Working Pressue: 300 psi
• Media: Water

• Body Material: Cast Brass
• Working Pressure: 300 psi
• Temperature: 70 degrees F

• Diameter Mm: 63 mm
• Coating: Color Coated
• Usage/Application: Fire Fighting
• Valve Type: Hydrant Valve
• Automation Grade: Manual
• Hand Wheel Material: Mild Steel

Fire hose valves work in pressure 1.12″ x 50` with 1.12″ nest pass coupling industrial single jacket, fire hose synthetic, rubber lined, 300 psi working pressure 1.12″*100 with 1.12″ nest brass coupling

• Size: 1/2" BSPP, 1/4" BSPP, 3/4" BSPP

• Size: 3/8,1/2,3/4"
• Pressure: 250 bar
• Material: Steel
• Color: Black
• Brand Name: Torque
• Flow: Upto 150lpm

• Material: Iron
• Usage/Application: Fire Hose Valve
• Inlet Connections: 53mm
• Brand Name: Ahd
• Technology: Forging

• Type: Female*Male,Double female°
• Test Pressure: 600 psi, 600 psi

The Hose valve is provided with standard taper pipe threads conform to ANSI B2.1 installation of the hose valve is achieved with readily available field tools, prior to installation, use pipe joint compound or PTFE tape apply on male threads, tighten the hose valve is aligned accordingly to requirement.

• Size: 1 - 1/2 and 2 - 1/2 inches
• Material: Brass
• Working Pressure: 300 PSI

• Features: Weather resistant, Compact size, Defect free

• Material: Brass
• Color: Golden And Red
• Use: Fire Hose
• Media: Water
• Temperature of Media: Low Temperature
•  :  

• Features: High strength, Corrosion resistance, Fine finish

• Material: CI
• Pressure: High Pressure
• Brand Name: VUBA
• Valve Size: 3/8" 1/2" 3/4" 1"
• End Connection Type: Threaded end (male, female connection)
• Port Size: 3/8" to 1"
• Mount Type: Line Mounting

• Features: Precise design, Corrosion resistance, High strength

• Material: Trivalent plated carbon steel body.
• Size: 1/4", 3/8", 1/2", 3/4", 1"
• Size Range: 1/4" To 1"
• Sizes/Pressure Rating Available: 350 for all sizes

Hose Burst Valves are used to prevent the uncontrolled descent of a load in the event of a hose failure. They should be screwed directly into the lifting device (normally a cylinder), orinto an in-line manifold that should be mounted as close as possible to the lifting device. A flow regulator valve, set at least 50% higher than the regulated flow, should be fitted downstream from the hose burst valve at the end of the flexible hose. VPC Series is ideal for lifting equipment and machinery where it is necessary to safeguard against excessive flow rates.