Hot Blast Valves Dealers

We are reputed Manufacturer and Supplier of Blast Valves from Coimbatore, Tamil Nadu. Blast Valves are made from top quality material and latest technology. The product is used to prevent shelter or bankers from rapid over pressure. Customers can contact us for purchasing Blast Valves in tailor made specifications. We provide Blast Valves at feasible rates to our esteemed customers.

• Valve Size: 54

hot blast valve is designed and service proven for continuous operation to stove dome temperatures. Stove change time is kept to a minimum as it takes only 10 seconds to open or close the valve. Compared to mushroom valve designs, less space is required, the pressure drop is negligible, costly piping and cable devices are eliminated; also the capital equipment cost is considerably less. The valve can also be used for backdrafting stack control-and further, is interchangeable with the stove burner valve with slight alterations.The hot blast valve disc is driven in either direction by means of levers and links. This provides a positive drive for both the opening and closing cycles. These levers and links are fitted with self-lubricating bronze bushings at the fulcrum points with grease fittings furnished for external lubrication. A central lubrication center is an optional feature.

• Sizes: 500mm to 3000mm
• Temperature: Up to 1550°C
• Pressure: Up to 600 Kpa

Effectively used to isolate the blast furnace from hot blast stove in integrated steel plants and pig iron making facilities using stoves. Also are used as a stove shut-off valve and back draughting valve. For a burner shut-off valve the same design is adopted with wedge arrangements to achieve isolation of gas lines from stoves.

• Sizes: 500mm to 3000mm
• Temperature: Up to 1550°C
• Pressure: Up to 600 Kpa

Effectively used to isolate the blast furnace from hot blast stove in integrated steel plants and pig iron making facilities using stoves. Also are used as a stove shut-off valve and back draughting valve. For a burner shut-off valve the same design is adopted with wedge arrangements to achieve isolation of gas lines from stoves.

 Fabricated construction• Minimizing of heat loss of process temperature due to optimized thermal    insulation of body, bonnet (uncooled) and paddle.• Thermal insulation comprising various Materials.• Optimization of thermal insulation, allowing for water cooling of only the body    seats and paddle• Special design cooling water passages provide optimum flow• Sealing in both directions, floating paddle Design• Valve actuation in accordance with customer’s requirements • Pressure rating up to PN 6 (Max)• Service temperatures up to 1650 °C (3000 °F)• Nominal diameters up to 3500 mm (140 inch)• Other sizes or operating conditions on request This design guarantees:• Considerable reduction of required quantity of cooling water (also during    emergency operation)• Extended operational life of the valve due to increased thermal insulation,    reducing thermal stresses to the valve.• No deposits in cooling water channels• Due to optimized design valve is easily Maintained• Reduced operating costs due to: - decreased heat loss of process    temperature - reduction in amount of cooling water required.

• Pressure Range: Up to 600

The blast waves are powered from hydraulic, pneumatic, solenoid sources. The length ranges from 25-35mm and above, breadth from 16-38mm and above, height from 20-25mm and above, diameter from 13-26mm and above. The pressure range is up to 600 bar. The device is manufactured using brass.

• Sizes: 500mm to 3000mm
• Temperature: Up to 1550°C
• Pressure: Up to 600 Kpa

Effectively used to isolate the blast furnace from hot blast stove in integrated steel plants and pig iron making facilities using stoves. Also are used as a stove shut-off valve and back draughting valve. For a burner shut-off valve the same design is adopted with wedge arrangements to achieve isolation of gas lines from stoves.

Hot Blast Valve, Air Regulators, tank valves, gas valves, Basket Strainers

We are an eminent and leading manufacturer, supplier, trader and exporter of hot blast valve in india.

Hot Blast Valve, Miniature valves, tank valves, Steam Traps

We are offering solenoid valve for air blaster operation. - bubble tight shut off - mounts in any position - vibration resiatnce up to 9g - suitable for high speed cycling - speed up to 600 cyclesmin - life > 10 million cycles - body material : aluminiujm - port connection : 12" bsp, subbase - pressure : 2-10 bar - media : air - coil voltage : any - coil enclosure : weather proof - orifice : 7,15 mm - seal : epdm, viton, nbr.

We are leading supplier of huge range of hot blast valve

Hot Blast Valve, low pressure regulator, Industrial Air Valve

hot blast valves, Industrial Air Valve, Miniature valves, Air Regulators

Hot Blast Valve, Back pressure regulators, Miniature valves, Compact Valves

We are engaged in manufacturing and supplying of hot blast valve

hot blast valves, low pressure regulator, Flush Bottom Valves

Sand Blasting Pinch Valve, sand blasting aluminum oxide, Sand Blasting Hose

BLAST FURNACE-COKE OVEN VALVES, steel plant valves, OXYGEN-NITROGEN VALVES

air blaster valve, air blaster, chemical industry air blasters

Hot Blast Valve, Horizontal Oil Pots, Hydropneumatic Tans Tanks

Hot Blast Valve

Over Pressure Blast Valves, Home Security Systems, CEM 11 Injection Tube

Hot Blast Valve

Hot Blast Valve, gas valves, alloy valves

Hot Blast Valve

Hot Blast Valve, Gate Valves