Hot Oil Pumps Dealers

• Application: Industrial
• Features: Durable, Better yield, Low energy consumption
• Capacity: 20-25 m3/hr
• Temperatures: Upto 325 - 350 deg cent.
• TDH: 50 m
• Model: FPE-TF 40-200 Water Cooled
• Material: CI

We are one of the leading Manufacturers, Exporters and Suppliers of Hot Oil Pump from Ahmedabad, Gujarat, India. Fabricated in compliance with the set international standards, our Hot Oil Pumps are corrosion resistant, easy to operate and have longer service life. Hence, they are widely used in petro-chemical industries, sugar industries and many others. Buyers across different countries of the world are free to place medium as well as bulk orders, we promise timely delivery.Operating Range : Pressure : up to 15 bar Head : up to 150 m Speed : up to 2900 rpm Pump Size : 25 to 100 mm Capacity : up to 300 m3 / hr Temperature : 70 to 350° C Type : Centrifugal Hot Oil Pump      Features :     Low maintenance Longer service life Easy to operate Applications : Plastic and rubber industries     Sugar Industries Petro-Chemical Industries Food Industries     Timber processing industries Textile, dyeing, printing industries     Paper making industries     Sysnthetic - fibre industries Oil Industries     Construction industries

• Power Source: 1.5KW
• Brand Name: EJECT SYSTEM
• Application: Industrial
• Material: BRONZE
• Item Code: 150
• Max Flow Rate: 65 LPM
• Motor Phase: 3 PHASE
• Motor Speed: 2880RPM

As, our organizations is a suppliers of Thermal Hot Oil Pumps; purchasers can place wholesale orders for it, and get them at the lowest prices. Only quality-tested material is used for preparing the offered lot. As a result of which, we our offerings stand high on the expectations of the clients. Salient Features : High strength Temperature resistant Single Stage and end suction centrifugal pumps The pump and the motor are connected by means of a flexible coupling on a common base plate Maintenance free The shaft and other rotating parts can be removed without dismantling the suction and the discharge systems Industries Can Use Thermal Hot Oil Pump : Food And Beverages Marine Industry Metal Industry Gas Plant Pulp and Paper Industry Wood Industries Chemical and Petrochemical Industry Material of Construction  : Cast Steel Ask For Price Technical Specification : Capacity  - 10 to 400 m³/hr Heads  - 5 to 100 mtr Discharge Size  -  Dn 32 to 100 mm Suction Flange  - NB 40 to 125 Temperature  - 100 to 350o Speed  - 1500 to 3000 rpm Pressure  - 16 kg/cm2

We are pioneer in offering quality assured assortment of Hot Oil Pump. Our Hot Oil Pump is manufactured by using sharp edge technology and quality material which we procure from our trusted and dependable vendors. This pump is highly demanded for condensate transport in power stations and industrial boilers.   Features: Low maintenance High efficiency Commendable performance Longer service life

• Power Source: Electric

"Flowchem" Series PPC pumps are Centrifugal Pumps in Back Pull-out Construction , Horizontal, Center line Mounted, Single stage, End suction and Top Centerline Discharge Suitable for Thermic Fluid & Hot Oil also.

Single stage, end suction centrifugal pumps. Main pump dimensions are compatible with DIN 24256 (ISO 2858) Single entry, closed type impeller is used. Radial vanes are used behind the impellers to lower the pressure and to balance the thrust (axial force). The pump and the motor are connected by means of a flexible coupling on a common base plate. Maintenance of the pump is very easy IT WOULD BE APPRECIATED TO ENTERTAIN ENQUIRIES FOR OTHER CRITICAL APPLICATON TO RECOMMEND SUIT SEAL TO OUR ESTEEMED CUSTOMER.AT PRESENT ROTON BEING THE MOST RELABLE GUIDE IN MANUFACTURING…THE MECHANICAL SEAL ALSO CONSTRUCT REBUIDS THE SEALS WHILE MAINTAINING THE TOLERANCE, INTEGRITY AND THE ORIGINALITY OF THE DESIGNS.THE SEAL ARE FABRICATED TO BE COMPONENT FOR THE PROPER OPERATION WITH A DEVICE OR MODIFICATION TO SIMPLIFY ITS USER EFFICIENTLY.

Thermic Fluid Hot Oil Pump Genral       "SHUKAN PUMPS" Range SPP And EY Series Thermic Fluid Hot Oil Pump is a Horizonatal Single Stage Centrifugal Pump.Foot Mounted and top Centerline Delivery Branch. The Complete Pump Rotating Element Can be withdrawn towards the motor end without disturbing the suction or delivery pipelines,due to'BACK PULL OUT DESIGN.' The motor remains fixed to base plate.the pump raotating elements can easily be dismantled into its components after reassembly no time consuming re-alignments is necessary. 'Pump Impiller' closed Or Semi-Open Radial Impiller Specially Designed For Low NPSH Requirments. Hydralically Balanced by Back vanes, or in the case of large impeller diameters by balancing holes and wear ring on both sides.Reliable fixing of impeller on the shaft by impeller nut and positive locking of impeller nut by means of threaded insert.   Thermic Fluid Hot Oil Pump Applications       Hot and cold water circulation, cooling water circulation Drip irrigation, water supply and building services Fertilizer Plants Dyes & Intermediates,Industrial Water supply Bulk Drugs And Pharmaceutical Effluent Treatment Plants Heating And Air Conditioning Plants Cooling Towers Sugar Plant Fire Fighting Water Supply Volatile Liquids Pulp And Paper , Textile Power , Steel Cement, Agriculture Fiber Jet Dyeing Thermic Fluid Hot Water etc... Oil Extraction And Waste Oil Refineries   Thermic Fluid Hot Oil Pump Operating Range         Speed - N - 960/1450/2900rpm at 50 Hz & 1150/1750/3500 rpm at 60Hz Capacity - Disharge- Up To 700 M3/Hr. HEAD - Up To 150 Mtr. Pump Sizes - DN- 25 mm to 300 mm. Temperature Up To 400° C         Thermic Fluid Hot Oil Pump Material of Construction           Graded Grey Cast Iron Carbon Steel ( WCB) Alloy Steel CF8M & CF8(SS-316,304)   SG IRON AND CAST STEEL CF3 CF3M(SS-316L) Alloy 20.etc.,           Thermic Fluid Hot Oil Pump Optional Accessories       M.S. Fabricated Base Frame/Flexible Coupling/Coupling Guard/Foundation Bolt.

• Power: >10 HP
• Features: Low maintenance , Discharge flange is at top and radial , Heat resistant mechanical seal
• Item Code: 84137095
• Max Flow Capacity: 51-100 m3/hr
• Max Flow Rate: 50 M3/HR
• Head: 15 meter
• Material: Mild Steel

• up to 180 m3/hr: up to 80 mtr.
• 32 mm to 80 mm: up to 350° c
• up to 3500 rpm: up to 8 kg/cm2
• With Air: Grey cast iron, CS, Alloy cast steel

In a Centrifugal pump‚ the procedure fluid enters through the suction spout and after that the focal point of direct known as the impeller. As the impeller rotates‚ it turns the fluid sitting in the pits between the vanes outward. Application Petrochemical industries Oil industries Synthetic-fiber industries Textile, dying, printing industries Plastic & rubber industries Paper making industries Timber making industries Sugar industries Food industries Construction industries Features Horizontal, single stage, single suction volute type, air-cooled centrifugal pumps with closed impeller pump shaft is supported by two heavy duty ball bearings, heat resistant mechanical seal, suction flange is on the front and axial, discharge flange is at top & radial. the below fields the pump are also proper in machinery manufacturing food processing medicine making and the circulation system for oil supplying of the hot oil boiler, the circulation system for the heating installation.

GTFP Petrol-Chemical Industries Oil Industries Textile,dyeing,printing industrie Synthetic - fiber Industries Plastic and rubber Industries Paper marking Industries Timber preocessing Industries Suger Industries Food Industries. Construction Industries. Technical Data:- Capacity :up to 180 m3 /hr Head :up to 80 Mtr Discharge Size :32 mm to 80 mm Temperature :up to 350° C Speed :up to 3500 rpm Cooling Method :With Air M.O.C. :Grey Cast Iron, Cast Steel,Alloy Cast Steel .  

Application: To support core markets which are Oil and Gas, Textile, Ghemical, Paper and Sugar, Plastic, Pharmaceutical & Food, Plywood, Rubber, Water, and Industrial Applications. The JEC HTP Series Pump is a horizontal volute casing, single stage centrifugal pump. is manufactured in accordance with Din 24256 (ISO 2858) standard. Designed for thermic fluids and hot water process conditions, Sturdy discharge cover designed for high stiffness, Optimised heat barrier & low wear. Design variant with bearing for high resistance, Reinforced deep-groove ball bearing with special grease fill for long service life,optimised shaft contour ensures reliable removal of leakage, Highly effective venting contour ensures optimum venting, Confined gaskets, Design variant with mechanical seal in tandem arrangement, Anti-seize plain bearing lubricated by the fluid handled, Optimised hydraulic system yields high efficiency, Impeller trimmed to match the specified duty point, Suitable for variable-speed operation and equipped with motor standard, Easy to maintenance for it's back-pull-out design which allows the without needing any type of external air conditioning!

• Pressure: 16 kg/cm2
• Capacity: 10 to 400 m3/hr
• Head: 5 to 100 mtr
• Discharge Size: Dn 32 to 100 mm
• Suction Flange: NB 40 to NB 125
• Temperature: 100 to 350oC
• Speed: 1500 to 3000 rpm

The array of hot oil pumps series designed and manufactured at Rotech Pumps & Systems work efficiently for high temperature service. It works by circulating heat transfer thermal oils or hot water with very high temperature in the process system.

Features Single stage, end suction centrifugal pumps Main pump dimensions are compatible with DIN 24256 (ISO 2858) Single Entry, Closed Type impeller is used Radial vanes are used behind the impellers to lower the pressure and to balance the thrust (axial force.) The pump and the motor are connected by means of a flexible coupling on a common base plate. Maintenance of the pump is very easy. The shaft and other rotating parts can be removed without dismantling the suction and the discharge system. Since the pump uses many standard parts, spare parts are readily available. These pump are designed so that there is no need for external cooling. Due to natural convection the pump temperature decreases towards the roller bearing.

hot oil pumps, bagasse carrier chain, Slat Conveyor Chain