HT Capacitors Dealers

• Type: Ht Capacitors
• Material: Aluminium
• Application: Industrial
• Certification: CE Certified
• Weight: 100-150g
• Color: Green
• Voltage: 220V
• Power Type: AC, DC
• Operating Temperature: -40 +70deg C
• Frequency: 50Hz
• Power: 0-5Kw, 10-15Kw
• Driven Type: Electric
• Feature: Auto Controller

We are offering ht capacitors. Features: 1. Type : all polypropylene (furnace duty, surge suppression, filter circuit eor observing harmonics & energy storage discharge 2. Class: up to 132kv 3. Connection : series star 4. Ter connection : using aluminum bus bars 5. Internal discharge resistor advantages: 1. Very low dielectric losses (< 0.18 w kvar) 2. Greater safety through an improved defined tank-rupture characteristics. 3. Low capacitance change with respect to temperature. 4. High fault current handing capability. 5. Superior electrical performance and reliability. 6. Environmental friendly capacitor fluid (impregnant). 7. High inrush and discharge current handling capability 8. High partial discharge inception voltage level. 9. High thermal stability. 10. Longer electro-chemical life.

HT Power CapacitorsPasayadan Eelectricals Products are based on modern design technique and high quality standards. Flexibility of these products to supply and install as per customer requirements. Applied Standards : The capacitors are designed, manufactured and tested to meet the provisions of the IS 13585 for LT, 13925 for HT and latest IEC publication. Confirmance to other standards is also available on requirement. Operating Conditions : Installation : Indoor/Outdoor Ambient Temp : -10°C to +60'C Temp Category : 50°C For H. T. Capacitors : Rated Voltage - 12 KV AC (Capacitors for other voltages are also avarable) Rated KVAR - Upto 800 KVAR Rated Frequency - 50 Hz / 60 Hz  Phase & Connection - Single / Three Phase with Internally Star / Delta Connection. Insulation Level - 28 KV / 75 KV   Design & Construction : The Pasayadan Eelectricals Capacitors comprise specially processed Mix dielectric / PP film, High purity grade Aluminum Foil & filled with Non - PCB synthetic Insulating Agent which has proved non - toxic and environmentally compatible. The Capacitor is normally designed suitable for mounting in vertical position with Bushing on the top. The Bushings shall be of Epoxy / Ceramic / Porcelain  The Capacitor container is made of CRCA sheet with all joints welded. Electrical Performance : Last Voltage and Harmonics. Capacitor are designed to carry Continuously 1.3 times of rated current caused by over voltage Harmonics. The following tests are carried out on every Capacitor according to the stipulations of the standard to ensure Service ability. Dielectric Strength Capacitance (output) Insulation Resistance Capacitor Losses Sealing.

We are Listed among the Most Dependable Electric ht Capacitors suppliers in India. the Entire Array of the Ht Capacitors is Procured from the Reputed Vendors So as Ensure Availability of other Alternative in the Market. Moreover, Various Countable Features like High Durability and Resistivity to Various Variations in the Flow of Electric Current have also Played a Vital Role in the Enhancement of the Demand of Electric Ht Capacitors in the Market. Customers are also Facilitated with the Timely Delivery of the Ht/lt Capacitors At the Most Reasonable Prices.

• Frequency: 50/60/100/120Hz
• Applications: HV and EHV Transformer testing, Series and Shunt Reactor testing, Induction and Arc melting Furnaces,
• Capacitor unit Output: Up to 750kVAr, single phase and three phase
• Capacitor unit Voltage: Up to 24kV.
• Protection: Internal Element fuse / External fuse
• Capacitor Bank Output: Up to 20MVAr, single phase and three phase
• Capacitor Bank Voltage: Up to 110kV

In order to make hassle free transactions, we have adopted an online payment procedure that ensures immediate transfer of money and confidentiality of clients' information. A famed name, the company is entrusted with a task of making available high quality lot of MSD Dry Type HT Heavy Duty Capacitor.   Model : MSD™- Dry type   Specification: 50/60Hz The MSD technology is based on the logical development of proven self healing for low-voltage power capacitors. It also permits the economic manufacture of medium voltage capacitors without employing inflammable and environmentally critical fluid oil filling. The actual active capacitor element consists of a large number of high-quality, self-healing round MKP elements which are wired to each other and installed in a stainless steel enclosure.   Details : Rating : 50/100/150/200/250/300 Kvar Voltage: 3.3/3.6/6.6/7.2/11/12 KV Application: PF improvement/Detuned/tuned harmonic filter

• Country of Origin: India
• Mounting Type: Surface Mount
• Usage/Application: PF improvement/Detuned/ Tuned harmonic filter
• Material: Aluminium
• Tolerance: 10%
• Capacitor Type: HT
• Rating: 50/100/150/200/250/300 Kvar
• Voltage: 3.3/3.6/6.6/7.2/11/12 KV
• Brand Name: Treffer

We are offering excellence in the form of Jaivic HT - APP Capacitors to enhance the buyers' content. In order to produce quality products, we make use of superior grade raw materials. Our quality auditors strictly check the raw materials against varied quality parameters before procurement.Construction : The Winding of element is flat type & winding is done in clean & dust free environment. The Elements connected in parallel are formed in series groups to meet the voltage requirement. The complete stack assembly is insulated with high grade electrical insulating material to get the desired insulation level. And total stack inserted in CRCA/SS container.   For terminals of capacitor using high class glazed porcelain bushings. The capacitor are dried under high vacuum and impregnated by synthetic liquid under accurately controlled conditions. Also We make capacitor with Internal Fuse & External Fuses. In Internal fuse capacitor, Every individual capacitor element is protected by fuse. In case of element failure during abnormal condition, only one element is disconnected, after disconnection of faulty element, the capacitor unit restores the normal operation within milliseconds with a slightly reduced output. Due to internal fuse the risk of case bursting is considerably reduced. Specification : Confirming to Standard IEC-60871, IS-13925Features : Extended foil design. Design with several layer of PP film + Foil construction. High dielectric strength. Available with Internal / External fuses. Longer life & high reliability. Low energy consumption. Available in M.S. / S.S. Container. Suitable for indoor & outdoor application. Design varied based on the type of system. Available with cubical of Isolator, Reactor, & HRC Fuses assly. Suitable for the most arduous system condition. Banking -  Star, Delta, Double Star. Export Worthy Packing : To avoid damages (scratches, dents etc.) in transit, individual capacitor units are packed in Polythene Bag & corrugated box using thermocole packing all around the capacitors. ISI Certification & Approvals : Jaivic Capacitors carry   Mark for the entire range including Banks up to 200kVAr. Jaivic Capacitors are approved & accepted by almost all the Electricity Boards govt. & Semi Govt. Departments, Panel Manufactures, OEMS etc in India.Iso Certification : The Company  has been certified as ISO 9001 Company.Guarantee : Jaivic Power Capacitors are backed by manufacturer warranty against manufacturing defects for a period of 15 months from the date of dispatch from the Factory or 12 months from the date of installation whichever is earlier.

HT unit: Capacitor units are manufactured in the range of 50KVAr to 1000KVAr & in the voltage range of 1 KV to 22KV. High voltage capacitor banks (3.3Kv to 132KV / 220KV) are formed by series parallel combinations of these units & connected in various formations of star / double star and delta, depending upon customer’s requirement / applications and applicable protection schemes. We have supplied hundreds of banks of ratings varying between 2-24 MVAr With similar capacitor units. Capacitors are type tested as per IEC / ISS (IS-13925) in CRPI (Govt of India), accredited by NABL Laboratory.

• Brand Name: Samwha/L&T/Siemens/Max/Usha/Other

We are offering Ht Capacitors. The ht capacitors are designed for power factor correction and harmonics filtration in power network. features : polypropylene non-self healing oil (non pcb) low loss high reliability high voltage electrical system

• Features: Quality finish, High grade material used, Light weight

HT unit: Capacitor units are manufactured in the range of 50KVAr to 1000KVAr & in the voltage range of 1 KV to 22KV. High voltage capacitor banks (3.3Kv to 132KV 220KV) are formed by series parallel combinations of these units & connected in various formations of star double star and delta, depending upon customer’s requirement applications and applicable protection schemes. We have supplied hundreds of banks of ratings varying between 2-24 MVAr With similar capacitor units. Capacitors are type tested as per IEC ISS (IS-13925) in CRPI (Govt of India), accredited by NABL Laboratory.

MKP-MKPg-type capacitors are based on a low-loss dielectric formed by pure polypropylene film. A thin self-healing mixture of zinc and aluminium is metallized directly on one side of the PP-film Vacuum.Our long-term experience as well as on going research and improvements in this technology ensure the excellent self-healing characteristics of the dielectric and a long operating life of our capacitors.

HT capacitors are manufactured from high quality BOPP film as dielectric and high purity AL foil as electrode. Capacitor consist no. of element in series parallel with without fuses. Elements are made with 'Edge folding, extended foil design and firm edge soldering' to improves its life. Impregnation with NPCB oil will help to work capacitor under normal condition without excess heating for indoor outdoor applications. Very low capacitor loss design, High current handling capability, Very strong & Economical Design, High Temperature withstand capacity with no change in output, Complete capacitor bank with suitable associated equipments on request.

• Brand Name: Packard
• Frequency: 50-60 Hz
• Voltage Rating: 440 V
• Capacitance: 24 MFD
• Usage/Application: Power
• Dielectric Material: Plastic
• Temperature Range: Max 108 Deg C
• Model No: PLCR24400D
• Pack Type: Box

• Features: Very low capacitor loss design, Very strong & Economical Design, Excellent performance, Easy handling & suitable mounting, High Dielectric Strength.
• RATED OUTPUT: As per requirement
•  RATED VOLTAGE: 1.1 KV to 11 KV
•  PHASES: Single or Three Phases
•  FREQUENCY: Star or Delta
•  CONNECTION: 50 / 60 HZ
•  PROTECTION: Fuses (I/E)
•  MOUNTING: Vertical / Horizontal
•  SAFETY: Discharge resistor fitted internally
•  INSTALLATION: Indoor / Outdoor

HT capacitor in distribution systems in mines, Electricity boards, in Industries, for testing application etc. These are used across big motors for lift irrigation schemes, water supply etc. For Power Factor Improvement.

We are a manufacture wide range of LT Capacitor Vital form 3.3 KV to 15 KV in single & three phase construction. The offered range is manufactured using high quality, high purity Aluminum foil & Bopp film.  

Automatic H T Capacitor Winding machine (HT 350I) is designed to wind the elements of H T Capacitors (foil and film type). The winding machine has diverse features such as : Superior closed loop tensioning mechanism, Automatic foil cut and fold unit, Online dry element testing and sorting unit, Element conveyer unit and many more.

• Voltage: 3KV to 132KV
• Type: 1 Phase / 3 Phase Bare Capacitor Units
• Brand Name: Energi
• Application: Power Factor Correction
• Capacitor Size: 50 KVAr - 1500 KVAr
• Dielectric Material: Polypropylene
• Installation: Indoor, Outdoor

• Features: Corrosion resistant, Non PCB impregnated, Simple installation.

• Brand Name: ABB
• Capacitance: 25 KVR, 75 KVR and 100 KVR
• Voltage Rating: 11KV and 33KV
• Dielectric Material: Polypropylene
• Capacitor Size: 300x150x60mm

We are offering capacitors.

Capacitor units are manufactured in the range of 50kvar to 1000kvar & in the voltage range of 1 kv to 22kv. High voltage capacitor banks (3.3kv to 132kv 220kv) are formed by series parallel combinations of these units & connected in various formations of star double star and delta, depending upon customer’s requirement applications and applicable protection schemes.

• Features: Hassle free installation, Durability, Finely finished

The traditional ALLFILM system of conventional medium and high voltage capacitors consists of aluminium foil and polypropylene, immersed completely in synthetic, flammable oil. Breakdowns in this kind of dielectric tend to result in permanent short circuits which take out the entire capacitor element, change the voltage conditions inside the capacitor and initiate a chain reaction of further failures of capacitor elements which will end up in the loss of the entire capacitor. In three-phase capacitors, this process is usually accompanied by the occurrence of phase asymmetries which may cause damage and catastrophic failure.

• \r\n Rated KVAR\r\n: \r\n 50 KVAR ... 1000 KVAR\r\n
• \r\n Rated Voltage\r\n: \r\n 3 KV...22 KV AC\r\n
• Power Loss: <0.2 W / KVAR
• Discharge to less than: 75V in <10 min
• \r\n Type\r\n: \r\n Indoor / Outdoor\r\n\r\n  \r\n

IEC 60871-4 HT Capacitors are manufactured with ALL FILM TECHNOLOGY. The dielectric material consists of high quality polypropylene film sandwiched between aluminum foil electrodes. A large number of capacitor elements are assembled to form a capacitor unit, also known as a winding pack. The elements can be provided with internal / external fuses. Each capacitor unit is permanently connected to a discharge resistor. The winding packs are housed in a sheet steel casing, which is filled with a high quality, environmentally sound impregnating oil. Residual moisture and oxygen are removed from the winding pack in a drying and impregnation process taking place under vacuum at an increased temperature and lasting several days. The Capacitor comply with the requirements of IEC 60871-1, IEC 60871-2 & IEC 60871-4 Features : Non PCB Impregnated Rated Frequency 50 Hz Internally fitted resistor Discharge time within 10 minutes Manufactured in all polypropylene, dielectric (film) Conductor Aluminum Foil Watts Loss - 0.2 Watt/ KVAr (max.) Max. permissible over current 130% of the rated current The capacitor complies with the requirements of IEC 60871-1, IEC 60871-2 and IEC60871-4.    

• Voltage: As Per Requirement 
• Voltage: 3KV to 22KV
• Dielectric Material: Polypropylene
• Rated KVAR: 50KVAR, 700KVAR
• Installation: Indoor/Outdoor
• Application: Power Factor Correction
• Minimum Order Quantity: 1 Unit