Hydrostatic Level Transmitter Dealers

• Accuracy: 0.5%fs o compensated temperature range: 0
• Output Signal: 4
• Construction: all stainless steel housing, rigid and robust
• Environment protection: IP68
• Usage: Industrial

Model LV36 Hydrostatic liquid level transducers and transmitters with flush diaphragm is designed for a wide variety of level measurement applications. This model pressure sensor and is protected by the stainless steel (SS) housing. Featuring the flush diaphragm makes the LV36 suitable to measure viscous media or media with small particles, so as to have diverse measurement applications.The standard reference pressure is gauge (or relative) pressure realized through a vent tube in the cable. The reference pressure can also be absolute pressure on request.The measuring range of LV36 transmitters spans from 0~1 to 0~200 meter water column (mH2O) withmeasuring accuracy of 0.5%fs (fs = full scale). The output signal of transmitters can be configured toeither current loop (4~20mA,standard), voltage output (0.5~4.5V, 1~5V), or digital output (I2C orSPI). The millivolt signal directly from the Wheatstone ridge circuit is also available on request(transducer version).

• Range: 1, 1.5, 2 mWC
• Max. Temp: 70ºC
• Output: 4-20 mA

• Material: Metal
• Range: Up to 20 Bar (200 Mh2o)
• Accuracy: 0.1%FS, 0.2% FS, 0.4 %FS and 1%FS.
• Material: Stainless steel submersible
• Quick response time: < 25 to 30 ms
• Output: 4 ... 20 Ma and Voltage Outputs

This Instrument are a pressure transmitter available in 4 ... 20 mA current loop or in voltage output signal versions. This transmitter offers a very high accuracy over a wide temperature range, an excellent repeatability and very long term stability.The piezo-resistive silicon sensor is anodic bonded on a very stable glass base, which is attached to a stainless steel construction. This assembly guaranties an excellent thermal isolation.The sensor is isolated from the process by a stainless steel diaphragm (1.4435 / 316L) and a filling liquid. The electronics is located within the hermetically sealed transmitter housing which give the Instrument an excellent resistance to shock and vibration. Protection class IP 68.Because these are small and submersible is universally suitable for all kinds of hydrostatic level measurements. It is the ideal product for environments such as in the food and beverage industries, water level measurement and all kind of standard industrial and processing applications.External zero setting ATEX II 1G, II 2G and II 1D Lloyd‘s Register Approval High long-term stability Excellent repeatability

• Brand Name: Charun
• Application: Used to measure the pressure of fluid,water treatment plants, chemical industry, and marine industry
• Features: Compact size,Sturdy design,No external adjustment required
• Country of Origin: Ahmedabad
• Prodcut Type: Hydrostatic Level Transmitter

As a reputed firm, we are devotedly engaged in offering a high-quality Hydrostatic Level Transmitter. Using the utmost grade components and sophisticated techniques, the offered transmitter is manufactured under the supervision of our adroit engineers. We offer it at a highly reasonable price.Application : Used to measure the pressure of fluid Widely used in water treatment plants, chemical industry, and marine industry   Features : Compact size Sturdy design No external adjustment required

• Output: 4-20mA, 0-5V, 0.5-4.5V, 0 – 10V
• Repeatability: +-0.2%FSO
• Pressure Range: 0
• Pressure Connection: 1/4″ BSP (M)
• Power Supply: 12-36VDC
• Overload: 150% of FS
• Long Term Stability: +- 0.2%FS/year

Applications : • TLH is a pressure sensor for hydrostatic level measurement.• Drinking water, dam water, bore well, well etc.• Suitable for top mounting.• Process temperature max. 80ºc.• Process pressure max. 200 mH2O.• Suitable for corrosive liquids.     Features :   • Compact size.• 4-core,Ñ� shielded cable with vent hose which is mechanically strong enough for deep submersible liquid level measurements.• Wide range industrial dc power supply (12 to 36 VDC).• Loop powered device (true-two wire).• No calibration required.• Customized process connections. like Threaded / Flanged / Hygienic etc.• Accuracy +/- 0.25% of FS.

• Material: Stainless Steel
• Color: Blue
• Condition: New

Hydrostatic level transmitter useful for most of liquid application. Useful for dairy, food, pharma and beverages industries.

• Type: Hydrostatic
• Material: Metal
• Application: For Liquid Measuring
• Frequency: 0-25Ghz
• Accuracy: 100%
• Range: 0-30Mtr
• Warranty: 1 Year

Be it water or any other liquid, hydrostatic level sensors measure in various applications in different industries, like food, water/wastewater. The Deltapilot and Waterpilot pressure transmitters for hydrostatic level measurement offer the right solution in tanks or wells, submersible or installed outside a vessel.The Contite sensor is especially developed for hydrostatic level measurement. With its protection for the sensor and cell electronics, the Contite sensor is a convincing solution in the event of severe moisture and condensate formation. The measuring element is hermetically sealed between the process membrane and measuring membrane. Hydrostatic level devices are also available with capacitive, oil-free ceramic measuring cells which are typically used in the process and environmental industries.Benefits : Maximum plant safety provided by one-of-a-kind, condensate-proof Contite measuring cell Contite cell offers very good reproducibility and long-term stability even after temperature shocks The ceramic cell has extremely good chemical compatibility and high mechanical stability thanks to ultra-pure 99.9% ceramic Robust ceramic membrane with integrated membrane breakage detection - also suitable for vacuum applications

• Range: minimum tank height 70 CM to maximum 200 meter
• Model: BT-PT-400
• Output signal: 4 . .20 mA, 0 .. 5/10 Vdc, RS-232, RS-485
• Power supplier: 10 ... 28Vdc (Current Output), 15 .. 30 Vdc (Voltage Output)
• Material in contact: AISI3l6L
• Case: AISI304
• Process connection: G1l4”
• Overpressure: 100 bar
• Protection: IP65
• Permitted temperature fluid: -20..+80°C
• Sensor class (included linearity and hysteresis): 0,25%fs
• Sensor: Piezoresistive

• Color: Blue
• Material: Aluminium
• Model Name/Number: FMD52
• Usage/Application: Industrial
• Ambient Temperature: -10 DegreeC to 80 DegreeC

• Application: Industrial, Laboratory
• Brand Name: Rlt instrumentation
• Features: Compact design, Lightweight, Accurate readings
• Temperature: 80 degree C to 150 degree C
• Housing Material: Aluminium
• Measuring Range: Upto 4 5 10 20 50 100 meter
• Pressure: 0.4 Bar to 10 Bar
• Output: 4-20 mA 2-wire 4-wire

In hydrostatic Level Transmitter, the measuring cell of the pressure transmitter detects even the slightest changes in hydrostatic pressure, which increases or decreases depending on the filling level. The acting pressure is converted into an electrical signal by the integrated electronics and then outputted as an output signal. Different types of measuring cells are used in level measurement based on the hydrostatic principle. Flowtech manufacture best in class and IS standardized Hydrostatic Level Transmitter in India which are supplied to various parts of India as well as the world. The Advantages Of Using Hydrostatic Level Transmitter Are: Ceramic measuring cells offer excellent long-term stability and high overload resistance Level measurement with hydrostatics is totally unaffected by foaming or vessel installations Metallic measuring cells also cover larger measuring ranges

• Features: Robust construction , High performance , Easy to install
• Item Code: HLT-01

• Range: 70 CM to maximum 200 meter
• Model: BT-PT-400

Hydrostatic level transmitter submersible level transmitter - Hydrostatic Level and Pressure Transmitters available with 0.7 meter length to 40 meter length - Hydrostatic Level and Pressure Transmitters available with Flameproof Housing (CMRI Certified) Broiltech Hydrostatic Level and Pressure Transmitters is CE Compliance Range: Hydrostatic Level and Pressure Transmitters Range : 0 to 0.7 meter to 1000 meter available with digital RS-232RS 485 OUTPUT available for all liquied like : water, milk, fuel, diesel, chemical, acid etc

• Type: Digital
• Brand Name: AJINKYA AUTOMATION
• Material: Stainless Steel
• Frequency: 50-60 Hz
• Accuracy: 99 %
• Ambient Temperature: 50-80 Degree C

SDSPLT static pressure level indicator transmitter assembled with advanced pressure sensor and double layers cable which are our original creation with wear resistant and water proof featutes can meet the demands of various extreme service conditions. Full welding stainless steel armored tube structure ensures the measurement in the corrosive liquids.The measured medium can be water, oil, acid, alkali or viscous liquid. Advanced in technology, precise in measure, reliable in quality, easy in installation, SDSPLT transmitter is an ideal and economical level instrument for process measure and control system.SDSPLT level indicator transmitter is tailored for liquid sulfur and high temperature naphthol and combined with previous international application experiences. This product with stainless steel armored welding cable and adopted with special high temperature large diaphragm sensor can be used to measure high temperature nd strong viscosity medium and can solve other measuring difficulties process industry.