Immersion Cooler Dealers

These units are utilized to cool and maintained the coolant sump of machining centre and grinding oil of honing machines at required temperature. The unit is mounted directly on top of the tank and the stainless steel evaporator section is immersed into the Coolant / Oil. The units are equipped with a digital temperature indicator cum controller to maintain the Coolant / Oil at a desired temperature and have all the general features of our hydraulic oil coolers. The following models are standard and customized units as per customer requirements are also manufactured.

• Voltage: 230 V
• Temperature Range: -90 deg C to +40 deg C
• Cooling Capacity: 350 W
• Application: Labs

• Speed: 5 to 30 rpm
• Microtube capacity: 15mm max

The Grant Accessory cooling systems allow systems to operate at or below room temperature by means of a cooling coil dipped into the bath; designed for minimal impact on working area. The C1G and C2G refrigerated immersion coolers Consist of a nickle plated copper cooling coil connected to a refrigerated unit by a flexible pipe. Extract heat continuously, with the bath control unit controlling temperature. Compatible with all four Optimaâ�¢ thermostatic controllers: T100 TC120, TX150 TXF200. The cooling coil may be immersed in liquids up to 100�°C but the cooler should only be used to cool down the liquid not to operate continuously above 40�°C.

• Application: heater
• Cooling power: 340W
• Compressor stages: Two stages
• Working temperature range: Amb to -90°C
• Refrigeration system: Air cooled
• Dimensions (W x D x H) mm: 380 X 460 X 600
• ower supply requirement: 230V/50Hz/1Ph

• Working Temperature: -90+30degC
• Ranges: 900 to 15000 kcal/Hr
• Cooling of Compressor: Air

The Siskin Ultrachill machines are built with a flexible evaporator to achieve -85 ºC in an insulated and evacuated vessel of 2.5 to 3.0 liters. It helps a researcher perform ultra low temperature reactions OR in some cases, aids as a cold trap. The adaptive PID control and superior class Pt-100 RTD sensor guarantee excellent temperature accuracies defined for a reaction. These machines can also be manufactured with a rigid probe (instead of the standard flexible probe – see RFC-90 RP for more details) and are generally used with a magnetic stirrer for better temperature uniformity.

Humidity Test Chambers Provide A Controlled Environment For A Wide Range Of Industrial And Biotechnical Testing Applications. This Line Is Designed To Duplicate Natural Conditions, Which Allows You To Determine The Limitations Of A Sample When Exposed To Various Temperature And Moisture Fluctuations. Three Sizes For Versatility.   Stainless Steel Chambers Are Seamless For Durability, Corrosion-resistance And Quality.  Low-pressure Water Vapor Generator System Provides Humidification Without Generating Additional Heat.  Microprocessor Controls And Digital Readout Display Both Temperature And Humidity Values.  Refrigerated Models Provide Extended Performance For Temperature And RH Ranges.  Two Layers Of Insulation To Maintain Temperature And Reduce Heat Loss.

immersion cooler, air cooler body, Panel Cooler, pellet Coolers

immersion cooler, Room Cooler, Desert Cooler

ultra low immersion cooler, Freezer, recirculating cooler

immersion cooler, recirculating chiller

immersion cooler, Aluminum Horizontal Rack, Carbondioxide Incubator

immersion cooler, Plastic Air Cooler, air cooling machine, air cooler body

immersion cooler, FEC 780 / 400-P, MOONEY-VISKOSIMETER

NESLAB CC Series of Immersion Coolers, Nexdep, sputtering targets

Low Temperature Immersion Cooler

DC Immersion Coolers, Forensic Fingerprint Cabinets, co2 incubators

immersion cooler, Spot Cooler

Immersion Coolers

Immersion Coolers