Silica Cased Immersion Heater
10 Per Piece
1000 Piece (MOQ)
Uses: Highest temperatures in all acids Ferric chloride etching baths Anodising Bright dip baths Except hydrofluoric and phosphoric
industrial immersion heater
1,365 Per Piece
10 Piece (MOQ)
Best Deals from Immersion Heaters
Littelhome Xing Immersion Water Heater
Get Price Quote
200 Piece (MOQ)
240V Industrial Immersion Heater
700 Per Piece
24 Piece (MOQ)
electric immersion heater
Get Price Quote
1 Piece (MOQ)
TITANIUM IMMERSION HEATER
500 - 2,500 Per Piece
25 Piece (MOQ)
Titanium heaters are heating elements made from titanium, a strong and corrosion-resistant metal. These heaters are designed for use in demanding environments where resistance to corrosion and high temperatures is essential. Titanium heaters are commonly used in industries such as chemical processing, marine, aerospace, and semiconductor manufacturing. These heaters are available in various configurations, including immersion heaters, cartridge heaters, and tubular heaters, to suit different heating applications. They are known for their durability, longevity, and ability to withstand harsh conditions, making them ideal for heating corrosive liquids, gases, and solutions. Titanium heaters are also used in aquaculture and aquariums for heating water in tanks and pools due to their resistance to saltwater and chemicals.
Immersion Heater
Get Price Quote
For any Production/process facility, when a large volume of fluid to be heated before pumping out to process application, the Immersion Heaters are always the best-recommended solutions. A single bundle or multiple smaller units can be installed in the Tank for the uniform heat transfer and steady heating of the fluid with all safety precautions in built within the heater and control system.Some of the precautions to be taken while designing and selecting an Immersion heater are Selection of right material for the wet parts to avoid potential corrosion from the fluid to be heated. Proper cold length & active length ratio to avoid hot spots & dry heating. Element skin temperature within flash point limit of the fluid to avoid any hazard. A Proper thermal design is very much necessary whenever heating a flammable fluid or in hazardous area installation. Fixing method & support for the bundle considering the turbulence during the in & outflow. Control system for both element skin & fluid temperature. ConstructionTerminal Enclosure: Marathon flameproof heaters are certified to install in hazardous area Zone 1 & 2 , Gas group IIC, IP66. The Terminal enclosure is designed to protect the terminals of the individual elements from external impacts, such as dust, moisture etc and to facilitate the connection of the Incoming power supply to the heater bundle.Heater Bundle: Consist of No. of U Pin heating elements adequately supported by set of Baffles & Tie rods, designed to deliver the specified temperature at outlet by maintaining the element temperature & pressure drop within the safe limits. Heating elements can be fixed to heater flange by means of standoff sleeve pipes with brazing or by direct welding or by means of threaded couplings. Heat duty of a bundle can be divided in to many sub groups (banks) based on process conditions. This will help in better control as flexibility in the operation.Temperature Sensors: The Heater bundle will have Element skin temperature sensor for monitoring and regulating the Element skin temperature within the limits. The Unit may also need additional sensors such as Tube sheet Temperature Sensor, Terminal Box Sensor, vessel Body temperature sensor and process fluid Temperature sensors based on case to case. The Sensors used for the system will be certified in accordance with the area of installation. The Temperature sensors are Typically RTD or Thermocouple. A simple heater bundle can also be controlled using Thermostat protection for skin & process temperature. If the Operation pressure is High, It is recommended to have a PSV (Pressure safety Valve) installed within the Heater Vessel as an additional safety measure.Control Panel: Heater controls Panel are designed to monitor & control the operations of the heater bundle also to ensure the safety of the equipment and operations. The control logic can be either ON/OFF (contactor) or regulated (Thyristor) or combination of both in a single panel. The control panels can be installed in both safe area & hazardous area by following respective design guidelines & certification requirements. The Control Panels are provided with various indication systems such as Power ON, Heater ON OFF, Trip, High Temperature etc for comfortable handling of the process. The Temperatures of Elements, Process fluid & other areas (with sensors) are displayed on the Panel for better monitoring & awareness. Control Panel will also have safety interlocks such as high element temperature, Earth fault, process over temperature etc along with Emergency stop access for the safe operation and control.Advantages Heaters can be used for quick heating of small volume storages as well as for heating large volumes with longer operational hours Widely used for heating high viscous fluids ( Bitumen, HFO etc) and reduce the viscosity before pumping out Environment-friendly design. No hazardous gas/smoke/ emission from the system. Precision Temperature control Can be accommodated in small footprints. Custom designed to meet specifications. Highly energy efficient and provide maximum dielectric strength. Compatible with standard industry piping and safety standards. Reliable design. Easy to operate and maintenance-friendly. Energy Saving. No need to drain the tank for any repair/replacements in case of indirect Immersion Heaters. Heating Elements: Mineral filled insulated Heating Elements or Tubular heating Elements with Ni-Cr (80-20) as heating Coil and suitable outer sheaths. Protections & control: Element Skin Temperature Control, Process Temperature Control, Earth Leakage Protection Overload Current Protection, Temperature Class Protection ( for Hazardous area only) Application At large Storage Tanks for preheating of thick fluids. Oil Heating (crude, Thermic fluids, and other Process fluids etc in storage tanks). Water heating applications & vaporizer System. For reducing the viscosity of the fluid and make it suitable for pumping out. Steam Boilers. Oil cooling systems & compression packages Edible oil heating for food industries.
immersion water heaters
Get Price Quote
Raw material that we source is unprocessed and of excellent quality as we procure it from the trusted sources of the market. Before obtaining it, our experts check it thoroughly. We keep a stern check while the product is being developed to make sure that we deliver only flawless range.
Immersion Heater
Get Price Quote
The Immersion Heaters we offer are specifically designed to heat different kinds of liquids by direct immersion. Quick heating, low power consumption, easy operations and resistance to voltage fluctuations are few attributes that distinguishes our Immersion Heaters from the rest. We are amongst topmost Manufacturers and Suppliers providing these heaters at reasonable rates in India and abroad. Also, bulk orders are timely executed.
Water Immersion Heater
Get Price Quote
Water Immersion Heaters
145 Per Piece
400 Piece (MOQ)
Immersion Heater
210 - 350 Per Piece
Bobbin Chemical Immersion Heater
Get Price Quote
Widely reckoned as a prominent Manufacturer, Exporter and Supplier from India, we offer Bobbin Immersion Heaters in the worldwide market. The Bobbin Immersion Heaters we provide are manufactured from optimum quality raw material and are highly demanded by the clients across the globe. Bobbin Immersion Heaters are fitted in flanges and screw type sockets for both vertical and horizontal mounting. Advantages Operating Voltage : 230 V AC to 440V AC Element Diameters : Min: 25mm > Max: 63mmIt's not necessary to empty the vessel while doing the maintenance on heater Suitable for horizontal / Vertical; operation Other Specs, optional as per customer requirement Raw Materials Used M.S S.S.- 304 S.S. -316 Titanium sheathing Suitable For Heating Water Oil Alkaline solutions
Immersion Rod Water Heater
Get Price Quote
70 Piece (MOQ)
FLANGE TYPE IMMERSION HEATERS
Get Price Quote
100 Piece (MOQ)
Industrial Immersion Water Heater
550 - 200,000 Per Piece
10 Piece(s) (MOQ)
Customers should stay rest assured with us for the payment procedures. They can pay us conveniently through wide-ranging payment mediums. In order to meet ever-evolving requirements of the clients, we have installed a capacious storage facility. This unit helps us in keeping stock of products in different grades and specifications.
Screw Plug Immersion Heater
Get Price Quote
Typical heating mediums include: Clean water Process water Lube and fuel oils. Heat transfer oils Mild and corrosive solution Design feature: BSP / NPT screw plug. - 1” to 4” Capacity: up to 6 kW Screw plug material: Carbon steel, brass, SS304 & SS316. Element material: Carbon steel, Copper, SS304 & SS316. Integral thermostat or thermocouple for temperature control and sensing.
Flanged Immersion Heater
250 Per Piece
5 Piece (MOQ)
Water Immersion Heater
Get Price Quote
100 Piece (MOQ)
Immersion Heaters are used in industries for various manufacturing processes that include preservation of various chemicals, fluids and gases by keeping them warm. These are installed over large tanks and vehicles, transferring heat rapidly to the content in an efficient way. The heating element submerges directly into the liquid medium in order to increase the process. Its most common applications are in petrochemical and large water containers, which require swift heating. We are manufacturing Immersion heaters according to customer requirements.
electric immersion heater
Get Price Quote
We are counted amongst prime Immersion Heaters Manufacturers, Exporters and Suppliers in global markets. The Immersion Heaters available with us are well-known for their excellent performance and high durability. We offer Immersion Heaters in different sizes and types depending up on the specific area of application. Special type Immersion Heaters can also be manufactured for hazardous locations depending upon clients� specific demands. Attributes Available in various sizes and sheath materials Offered with standards unit terminal enclosures Moisture resistant Explosion proof Heaters for hazardous locations are also available Product Details Made from S.S., Incoloy 800, Inconel 600, Copper, Titanium, Alkaline etc. Covered with S.S, Titanium, Glass or Silica material Offered with Lead bonded pipe and clamp plate Suitable For Heating Requirements Of Oil Water Chemical Applications Water tanks Oil tanks Chemical tanks and vessels Anodizing bath Plating baths Variety Available Over the Side Immersion heater Threaded or Screw Plug Immersion heater Flanged Immersion Heaters
Post Free Ad
5.0
