Indirect Fired Heaters Dealers

Grand Prix offers Indirect Water Bath Heaters for indirect heating of Crude Oil & Hydrocarbons by using Gas Fired Burners having a max capacity of 10 MMBTUHr.

Indirect heated frying systems : TristarIn Indirect heated frying systems the edible oil is heated indirectly by thermic fluid or steam. Burning fuel generates hot thermic fluid or steam.In this system the combustion of fuel generates a temperature in the range of 800 deg C to 1000 deg C. This temperature and hot flue gases heat up thermic fluid or water to generate steam as the heating source for the edible oil. The maximum temperature of thermic fluid or steam is 300 deg C that is used to heat the edible oil to a temperature of up to 200 deg C for frying needs.Here the temperature gradient between the heating media and the heated media is low, the oil film temperatures are low and hence the rate of deterioration of oil is low.In the TRISTAR series of frying systems a heat exchanger is provided to transfer the heat from the heating media to the edible oil.The heating unit is external or separate from the frying system. This means that the fuel is burnt in a separate unit, which is placed in another room.

Grand Prix offers Indirect Water Bath Heaters for indirect heating of Crude Oil & Hydrocarbons by using Gas Fired Burners having a max capacity of 10 MMBTUHr.

Indirect Air Heaters are an advanced Shell and Tube design heat Exchangers. The flue gases pass through the main combustion chamber Connected through flue tubes, arranged to give three pass; while the air is forced over the combustion chamber and flue tubes thus delivering clear uncontaminated hot air.

Manufactured in many sizes from 30,000 to 12, 00,000 BTU, gas or oil fired models. These heaters are recommended for low temperature types of supply water heating applications requiring temperatures up to 190F. They are also used for combination closed system supply water heating applications. Efficient water to water heating using built in copper heat exchangers, Stainless steel heat exchangers are available in these units. The Indirect Fired Water Heater is an industrial quality unit designed for economically heating large volumes of domestic or process water for commercial and industrial applications. The all bronze and copper heat transfer coil eliminates the possibility of rust throughout the water passages. The indirect principle of heating the process water with sealed-in primary water combined with controlled circulation minimizes the possibility of scaling within the heat transfer coil. We are well experienced in Glygol heating system also. 1. The Indirect Hot Water heaters 30M to 1200M BTU for heating water from 80° F to 190° F, atmospheric fired 2. Also great for Swimming Pools, Heat Pump Applications, Anaerobic Digester or Sludge Heating. 3. Indoor models only.

indirect fired heaters

We offer Indirect Fired Coal Heaters. Aarkay's 'SUPER' Phase - I (SIX PASS) and Phase - II (EIGHT PASS) Heaters guarantee the lowest fuel consumption in the Tea Industry as compared to any other solid fuel based Indirect Fired Heater in the world.

Grand prix offers indirect water bath heaters for indirect heating of crude oil & hydrocarbons by using gas fired burners having a max capacity of 10 mmbtuhr.

Indirect Fired Air Heater, Flexible Spiral Duct Machine, chimney pipe

Indirect Fired, reverse air baghouse, water scrubber, motorized trolley

indirect fired heaters, Industrial Water Heating Element