Industrial Strip Heaters Dealers

• LEAKAGE CURRENT (COLD): _ 0.5 Ma for 240 V
• RESISTANCE TOLERANCE:: ± 5% TO 10%

The provided heaters are used in surface heating, baking ovens and manufacturing equipment. Moreover, we never compromise on our quality to deliver these products at nominal rates.

• Type: Strip Heaters
• Certification: CE Certified, ISO 9001:2008
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Power Source: Electric
• Warranty: 1year, 2years
• Usage: Industrial Use

We are the main supplier of this product.

Industrial Strip Heaters provides greater surface area of length than round elements which means equipment can be designed with more wattage in less linear space. Or by replacing a round element with a strip heater of the same length, the watt density can be significantly reduced. In immersion applications, the narrow profile increases the natural convective flow of fluids, resulting in lower sheath temperature and improved heat transfer to the process.

• Voltage: Up to 600 V AC
• Length: 5 ½ to 48 inches
• Width: 1 ½ inch

Strip heaters, commonly called component or clamp heaters, based on the principle of convection air heating, use surface area to transfer heat effectively. Using most advanced heat technologies, strip heaters are an outstanding industrial heating product. It comprises of a heating element, a protective sleeve or sheath, and mounting hardware and can be clamped or bolted onto objects or solid surfaces. A coiled nickel chromium element wire is placed in the center of the heater. The element wire is then embedded in magnesium oxide (MgO)-based insulation and compacted into a solid mass creating excellent heat conductivity and high dielectric strength. The heater is then enclosed in desired sheathing. Suitable to work in 500 degree F temperatures, magnesium oxide is used for increasing efficiency. Temperatures can be controlled by using a temperature controller such as a thermostat. When using strip heaters, proper sheath material for resisting rusting or oxidation and suitable watt density of the element should be selected keeping in mind the application. These can be shaped and sized according to the use. A moderately inexpensive way of heating, strip heater is a tremendous solution to meet any budget.

Industrial strip heaters are the reliable and highly efficient industrial heaters of various types, produced very scrupulously by us to serve optimally our all numerous industrial clients of India and abroad.

Easy to install with clamping bands or standard bolts and heavy duty clamps provides heat where you need it at accurately maintained temperatures. It is made of standard section 1 ½" to 1 916" by ¼" to 516" and length and load as per requirement.

We offer finest quality Strip Finned Heaters that are utilized for heating smooth as well as flat surface. Available in different materials such as M.S, S.S sheathing and brass, these Strip Heaters are insulated with mica and ceramic. Used in number of industries, strip heaters are covered with finned for better transmission of heated air in application such as blower units, ovens, dryers, forced air ducts and so on. We provide easy availability of Strip Finned Heaters and at affordable prices. We are regarded as one of the most prominent Ceramic Strip Heaters Manufacturers In India.

• Length: Up to 72 inches

Cartridge heater often considered as component heater a cartridge is dependent on hole clearance. The larger has a heating coil wound on a ceramic core and are the hole clearance the lower the recommended watt cylindrical-shaped, heavy-duty Joule heating element. density. For temperature sensing, a thermocouple Electricity flows through coil when a two or three-phase should be positioned in the heater but its life is reduced voltage is applied. The electricity heats the coil and, by slow "onoff" cycling of power controllers. So PID auto subsequently, the cartridge sheath. The watt density (in tuning controllers with solid state relay or thyristor output Wattinch2) depends on the number of spirals or turns are suggested. per inch. The sheath comes in contact with the surface being heated. Insulation in the cartridge heater ensures that the heating wire never comes in contact with the sheath and protects the sheath from melting in case of any mishap. The leads that come out of the heater terminal have metal conduit, or silicon sleeves to protect from high temperature. Lead wires are often fiberglass or silicon rubber.

Air-Conditioning, Stoving Paints, Textiles, Leather Drying Chambers, Heating-Arrangements. Generally available from 0.5 kw to 3.5 kw, 240 Volt Ac50 Hz single phase. Operates upto 400° F. Spl. heater can also be made according to specification, are made of Stainless Steel, GP Sheathing having the heat Resistance Chrome nickle 8020 element protected under the best insulation to Intallation with in forced air only in horizontal and flat position only.

A specific, Nichrome or Kanthal ribbon wire is wound on specially selected Mica Strip, providing even heat distribution for maximum Heater life. Mica of 1mm thickness is used to insulate the windings, providing excellent dielectric strength and thermal conductivity for efficient heat flow. Plus Mica withstands high voltage spikes, resists moisture and is inert to most chemicals. The element is then enclosed in either a Stainless steel or a specially treated rust resistant electro plated steel sheath to provide high emissivity and good thermal conductivity for sheath temperatures up to 300°C. (For sheath temperatures up to 550°C a stainless steel sheath is available).

industrial strip heaters, density cartridge heaters, industrial air heaters

industrial strip heaters, Immersion Heater, Pencil Heaters

industrial strip heaters, water heater elements, Thermocouple

industrial strip heaters, Heating Elements, Band Heating Element