Infrared Switches Dealers

• Power supply: 100 - 250 VAC
• Delay time: 8 sec.
• Photocell sensor: CdS
• Infrared sensor: Dual element
• Detection speed: 0.15 - 3 m / sec.
• Mounting height: 1.8-3.0 m (6-10 ft)
• Temperature: -20° C - 50° C (4° F - 122° F)
• Dimensions: 125 x 105 x 62 mm
•  :  

• Material: NBR
• Certification: CE Certified
• Power: 0-5Amp
• Hole Diameter: 0-20mm
• Setting Range: 0-1500pF
• Pack Type: Box

Both Emitter and Receiver are enclosed in a single housing. Infrared light beam form emitter is reflected by an object . T h i s ref lected beam causes a change in receiver and produces an output signal.

We are offering ir/ photoelectric proximity switch, diffuse retro through beam sensor used in factory automation with shortcircuit reverse polarity protection.

• Country of Origin: India
• Max. Voltage: 110V
• Mechanical Life: 1 Year

The LED lamp connected to the output of the IR Sensonr switch will trun ON when the hand pass over the IR switch within 10cm in distance, and will turn OFF when the hand pass over again. The sensor switch will turn ON or OFF with above repeatable steps Function: The LED lamp connected to the output of the IR Sensonr switch will trun ON when the hand pass over the IR switch within 10cm in distance, and will turn OFF when the hand pass over again. The sensor switch will turn ON or OFF with above repeatable steps.

PS-919 (Panic Switch) Panic Switch Surface Mount Type Push Button Function Electrical Rating 230 V ACDC, 4 Amp. Option for EmergencyExit Marking on the Button NONC both contact option available.

ICIR-720 is a passive infrared SenSwitch designed for indoor/outdoor lighting control by sensing the presence of a human body. Its unique mechanism design allows it to be mounted on the ceiling or wall. The sensor head can be adjusted vertically or horizontally to provide easy adjustment of detection coverage. LUX and TIME controls can also be adjusted according to individual requirements. Features: •Wall/ceiling mount available•Built-in ambient light sensor•Adjustable TIME and LUX control•Works at 100~250VAC•Weatherproof housing design•Sensor head swivel design•Superior RFI/EMI immunity•Surface mount technology   Specifications:     • Power supply: 100~250VAC      • Maximum load: 10A for resistive load      • Delay time: 8 sec.~8 min     • Photocell sensor: CdS     • Infrared sensor: Dual element      • Detection Range: 90° wide, 12m @ 25°C     • Detection speed: 0.1~3 m/sec.     • Mounting height: 2.4~4 m      • Op. temperature: -20°C~50°C (-4°F~122°F)     • Dimensions (mm): 125 x 68 x 96  

• Power supply: 5V
• Control Outout: 100mA when supply 5V
• Circuit consume: <25mA
• Response time: <2ms
• Direction: ≤15°
• Range: 3
• Shell material: plastic

• Range: 120 Degree

PIR (Passive Infrared) Sensor can sense motion and detect whether a human has moved in or out of sensor range. A PIR Sensor detects the heat (infrared) emitted naturally by human beings. When a person in the field of vision of the sensor moves, the sensor detects a sudden change in infrared energy and the sensor is triggered (activated). We have introduced 2 models of PIR Sensor:Rated Load: 500W (Incandescent Lamp), 200W (Halogen Fluorescent Lamp) 80W (LED Lamp).

5 in 1 Stagnant Occupant Sensor, Bus Enabled, Energy Pilot, with Ultrasonic Cali ratable Distance sensor for occupancy, LUX, PIR, Security, and Energy Saving Distributed intelligence, for both automation and security use, (PIR Detection Angle = 110 Degrees, PIR Adjustable detection. Range 10 Meters diameter), (Ultrasonic Distance Adjustable 1-4 meters)

Features: Desktop Video Only, 1 Way Audio and 2 Way Audio switchers Upto 16 Inputs 004C, 008, 016 4/8/16 I/P Video only switchers VSRA 104, 108, 116 4/8/16 I/P 1 way AV switchers VSRA 016, 116, 216 4/8/16 I/P 2 way AV switchers * 4 to 16 I/P small foot print switcher * 0 .... 99 seconds independent dwell time for all channel (0 sec. for channel skip) * Digital volume control available on all 2-way AV switchers * Independent volume settings for all channels

• Operating Voltage: 80-250 V

In modern world day after day technology is changing very fast and we have to keep in pace with present technology. Sensors made in yester years.were little bigger in size, hence, with vigorous thought we successfully innovated more than 300 sensors of small sructure. These sensors are not only accomodative but also good for users. These are direct one to one replacement for many imported switches and are widely used in stacking positions, detecting print marks on packaging papers on auto-packaging machines or paper reels on cutting machines, toothpaste filling machines and general with those system which requires positioning of the print mark, Housed in plastic body with replacable S.S. plunger assembly. The S.S. plunger as a positive stopper for Pneumatic and Robotic assemblies and has direct input protection upto 2 tones. Stroke length can be adjusted precisely.

We are offering infrared photoelectric switches for automation in pharmaceutical machines, formfillseal or packaign machines, food processing, textile machines, conveyer systems, automobile engineering industreis. Chemical paint plants, film paper plants, ceramic tiles plant, safety and security applications etc.

We are offering infrared proximity switches, protocontrol make infrared proximity switches find application in almost every industry where high sensing range, miniature construction is required. The special modulated beam makes it immune for use in industrial atmosphere. Switches with fiber optic cable are offered to sense miniature components like tablet, print mark, pouches and caps. Photoelectric sensors are exclusively used in spm and pharmaceutical machinery to sense tablets and capsules. They also find application in heavy industries like crane to sense position and to avoid collision. diffuse models are available having sensing distance up to 5 mtrs. Retro reflective switches with mirror are offered up to 10 meters range. Through beam sensors are available up to 25 mtrs range. models with built in termination chamber, universal supply (ac as well as dc) and potential free relay contact output are available. models with teach function, back ground suppression are developed to sense change in colour or to sense parts on shiny surface. print mark sensors are offered with high response speed so as to detect pouch traveling at high speed.

Infrared Sensor Switch Works Based On Infrared And Motion Technology. It Automatically Turns OnOff While Detected People Come Or Out. The Main Feature Is Easy To Install Or Replace Existing Switch. IR Switch Is The Best And Good Solution For Energy Saving. You Can Easily Integrate With Various Electronic Devices.

• Rated Voltage: 230 V AC 50 Hz
• Load Wattage: Max. 300 W incandescent bulb or Max. 150 W fluorescent lamp

These Energy Saving Smart Switches can detect the infrared Rays released by human body motion within the Detection area and then start the load-light automatically. This unit is designed to use with Incandescent light (indoor use only). With this switch, light-load can be operated manually as well as automatically as per your requirement. It has a normal switch, which is special in the PIR Sensor. Some customers want to make the lamp always on or off can achieved by this switch. The HC - 7C is better for indoor use, such as living room and restroom and so on.

• Type: Circuit
• Material: NBR, PVDF
• Voltage: 200VDC, 230VAC
• Application: Home Use, Industrial Use
• Operating Temperature: 0-20deg C, 20-40deg C
• Frequency: 50HZ, 60Hz

We are a noted Manufacturer and Supplier of Infrared Remote Switch Circuit in India. The circuit described here can be used for any simple on/off function such as controlling a lamp or fan. The major advantage is that this circuit is absolutely free from ambient light interference and provides controlled range of about 10 mt without the use of any focusing lens. Transmitter and receiver circuits are described below:Transmitter Circuit :Transmitter section consists of a power supply, an oscillator and an output stage. The circuit diagram for transmitter is shown in fig. IC1 is wired as an astable multivibrator with a center frequency of about 26 KHz. When switch S1 is pressed, the circuit gets energized, output of IC1 is a square wave. The infrared LED connected at its output transmits IR beams modulated at the same frequency. The oscillator frequency can be shifted slightly by adjusting preset VR1.Receiver Circuit : Receiver section comprises power supply an infrared detector module, time delay circuit with noise filter, bistable flip-flop and an output section. The IR signal from the transmitter is sensed by the sensor and output at pin 2 goes low. This in turn switches on transistor T1. Consequently, capacitor C8 starts charging through resistor R5. When voltage across capacitor C8 reaches about 3.5V, IC2 receives a clock pulse at pin 14 and its output at pin2 goes high. As a result T2 becomes on, whish energizes relay RL1. The output of IC2 is also used for lighting the LED D5 indicating the presence of a signal. When ON signal is available output of sensor goes high and T1 is switched OFF. Now capacitor C8 starts discharging through R6 and voltage across it decreases to zero. When another signal arrives after about 300miliseconds capacitor C8 again charges through R5 and IC2 gets another clock pulse. But its reset through diode D4, the output at pin2 toggles. If another pulse arrives from the transmitter before a delay of about 300ms, T1 again turns ON and voltage across C8 cannot fall below 1.5V i.e. maximum input voltage required to sense a logical low by IC2. Hence, the output of IC2 does not change. This feature prevents false triggering. R5, C8 network provides immunity against IR noise. IC3 is a regulator IC that provides a regulated voltage. Protect the circuit :High frequency produces a lot of harmonics act as a source sustained noise. To minimize this effect, the sensor should be covered with a dark red glass plate light from other sources like fluorescent lamps. IR candescent lamps and sunlight do not have any effect on the circuit.Calibration : If LED D5 does not glow, adjust preset VR1 till it glows. Gradually increase the distance and fine-tune the preset for maximum range. ON/OFF switch by remote from 10mtr distance.

Infrared Sensor Switch, Batch Ovens, Server Rack

infra red remote switches, ir switches, rf switches, data conversion service

passive infrared sen switch, Outdoor Motion Detector, Microwave Sensor

IR Switch

IR Switch, Six A Three Pin Socket

Passive Infrared Senor Switch, HVAC Panel Board, Switch Socket

Digital Switches For 3 Lights With Ir Sensor

Primesol HDMI 4x2 HDMI Matrix Switch with IR PS-HDSP4X2M

IR Switch, 6 13a Universal Socket, shaver socket, 10 A Bell Push Indicator

ir switches, GPS System, touch sensitive door bell, motion sense light

IR Switch, embedded solution, mobile charge, Electric Mobile Charger

Passive Infrared Switches, motorized curtain, Panic Switch