Infrared Tube Heaters Dealers

• Brand Name: RadiHEat
• Material: Quartz- Tungsten
• Finishing: Clear, White coated, Gold coated
• Condition: New
• Power Source: Electric
• Color: Transparent
• Automatic Grade: N/A
• Shape: Linear

Litex is already supplying Twin Tube IR lamps from so many years in various types as per the need of customer. These types of Twin Tube lamps are A,B,C,...etc.

Gold plating is done on quartz tube over 180°. These heaters reflect the radiant energy through the opening area only, improving element efficiency by as much as 20% compare to without gold plating heater. Energy cost savings are realized. Reflectors are often not needed. Surrounding work area tempratures are cooler. These heaters are also available with a without gold plating.

• Operating Temperature: 900° C
• Response Time: Around 1 Minute
• IR Wavelength Between: 2-4 M
• Verage Working Life Up To: 10000 Hours
• Dimensions: 11 x 23mm and 15 x 33mm
• Max. Overall Length: Up to 3mm

Twin-tube IR heater  the operating temperature of 900 degrees celsius. 10000 hours of working hours.  

QUARTZ GLASS The quartz glass is very pure and provides good transmission and temperature resistance TWIN TUBE The unique twin tube design offers high radiation power and very good mechanical stability allowing emitters of lengths up to 3.5 meters. Emitters are available in Short Wove, Medium Wave, or Long Wave versions. That gives you the possibili-ty to select the optimum wavelength for the material to bo hooted. Dimensions and filaments are matched to requirements. GOLD/ WHITE COATED Twin Tube Infrared Heater is made by virtue of a gold & white coated which con emit heat directly to the product. A coat-ing on the infrared emitters reflects the infrared radiation. Consequently the infrared radiation impinging on the product is virtually doubled. FEATURES Infrared heaters can be matched to material characteristics - following higher process speeds and less energy consumption Directed heat only where needed Infrared ovens needs less space Non contact or medium needed Short response times of infrared heaters for switch on / switch off

Infrared Tube Heaters Various types of heaters like Cartridge Heaters (Low watt & High watt density of various sizes), Ceramic Infrared Heaters (Elstein brand- Germany) and Short-wave infrared heaters.

Our Twin Tube MW IR Heater is made up of 8-shape high-purity clear quartz twin tube, with each tube having Ni-Chrome heating coil that runs in U Shape in the tube. Features Heating up and cooling down time is approximately 50 secs. Available with gold reflector and without reflector. The outer rear side of the tube of the reflector has the gold coating. Heat loss from backside is prevented by the reflector, thereby power is saved. Results in making surrounding work area cooler. Increases the efficiency and directionality of the heater. Specifications: Standard sizes (in cross section): 11 mm x 23 mm & 15 mm x 32 mm. Maximum length: 200 mm. Power density: 60 KW / m2 can be achieved. Paint Baking

• Material: Glass
• Country of Origin: Indian
• Warranty: Na

We would like to introduce ourselves as a leading supplier for Short Wave Infrared Lamps. These IR Lamps are available in different sizes and specifications as per the catalogue enclosed. The same can be supplied along with the module i.e with the mounting assembly if required .In addition to the above we can also supply you Ceramic Infrared Heaters, Medium Wave Quartz heaters in single or twin tube with or without Gold coating, Band heaters in Ceramic and Mica, Cartridge Heaters, Tubular Air Heaters, Temperature Controllers and Thermocouples from single Roof. Short Wave IR heaters are used in stretch blow moulding machine, paints shops, powder coating ovens, screen printing, curing, printing ink drying in offset machines, stentors and many more applications where the attainment of high temperature in shortest possible time is what count. We can depute our engineer for further discussion. Awaiting for our Valuable enquiry. Thanking you and assuring our best services at all times.

• quartz tube: 180°.

Gold plating is done on quartz tube over 180°. These heaters reflect the radiant energy through the opening area only, improving element efficiency by as much as 20% compare to without gold plating heater. Energy cost savings are realized. Reflectors are often not needed. Surrounding work area tempratures are cooler. These heaters are also available with a without gold plating.

• lengths: 3.5 meters.

The unique twin tube design offers high radiation power and very good mechanical stability allowing emitters of lengths up to 3.5 meters. Emitters are available in Short Wove, Medium Wave, or Long Wave versions. That gives you the possibility to select the optimum wavelength for the material to bo hooted. Dimensions and filaments are matched to requirements.

Tubular (sealed element) is a fine coil of Nickel chrome wire in an insulating binder (MgO, alumina powder), sealed inside a tube made of stainless steel or brass. These can be a straight rods (as in toaster ovens) or curved to fit in a smaller space (such as in electric stoves, ovens, and coffee makers).Tubular heaters during recent years are widely accepted as a mode of heating due to their flexibility with which these can be formed into any shapes and sizes depending on the applications. Due to their versatility, flexibility and relative insensitivity to mechanical damage, the tubular heaters have often provided ideal solution to difficult problems encountered in heating.

• Brand Name: Diligent
• Voltage: 230 V
• Frequency: 50 - 60 Hz
• Phase: Single
• Size: 212 - 1600 mm(Length)
• Power(Watts): 500 - 6000 W Approx
• Usage: Industrial

• Dimensions: 8.5x17mm, 11x23mm and 15x33mm

Operating temperature 900 °C Using Ni-Cr or Fe-Cr-A1 resistance wire as filaments Response time around 1 minute IR wavelength between 2-4 μ Average working life up to 30000 hours Gold or ceramic coating at rear side as a reflectors Max. Overall length up to 4m

• Standard sizes: 11 mm x 23 mm & 15 mm x 32 mm.
• Maximum length: 200 mm.
• Power density: 60 KW / m2

Twin Tube MW IR Heater is made up of 8-shape high-purity clear quartz twin tube, with each tube having Ni-Chrome heating coil that runs in U Shape in the tube. Heating up and cooling down time in approximately 50 secs. Available with gold reflector and without reflector.The outer rear side of the tube of the reflector has the gold coating. Heat loss from backside is prevented by the reflector, thereby power is saved. Results in making surrounding work area cooler. Increases the efficiency and directionality of the heater.

Twin Tube Medium Wave Infrared Heater which are the efficient sources of radiant energy. These heaters have heat up time of 50 seconds and cool down time of less that 15 seconds. The heaters are designed to offer excellent life characteristics even if operated. Continuously or intermittently with a quick heat & cool down response time. We can manufacture the quartz heater with 40 watts per square inch.

• Color: Silver and White
• Country of Origin: Made in India
• Condition: New
• Heater Material: Infrared Tube Heater
• Types: Immersion Heaters

• Brand Name: Diligent
• Voltage: 230 V
• Frequency: 50 - 60 Hz
• Phase: Single
• Application: Industrial
• Size: 212 - 1600 mm(Length)
• Power(Watts): 500 - 6000 W Approx

IR wavelength between short wave and medium wave Response time around 1 ~2 seconds Average working life 7000 hours Gold or ceramic coating at rear side as a reflectors Dimensions 15x33mm Max. overall length up to 4M Vertical and horizontal emitters are available

• temperature: 900 °C.
• length: 100mm to 3000mm

SHORT WAVE IR HEATER is made by housing tungsten wire in high purity of quartz tube which is filled with halogen gases to avoid filament oxidation when working. The temperature of quartz infrared lamps is around 2400 to 2500°K. The IR wavelength of the Radiation emission is between 1 to 2 μ. The average working life of lamp is 5000 hrs.

Infrared (IR) is the electromagnetic radiation that has a wave length longer than visible light but shorter than visible light but shorter than microwave radiation. IR wavelengths are between 760nm (0.76µ) and 1m and can be further divided into short wave infrared, medium wave infrared and long wave infrared. Shortwave radiation penetrates more and ensures uniform heating. To achieve efficiency in heating it is recommended that the lamp should correspond to the absorption characteristic of the product being heated. A part of the infrared radiation spectrum is reflected from the surface of the object being heated. And the rest is either absorbed by the object or passes through the object.

• diameters: 8,10,12,15,19 mm
• length: 300 to 1500 mm

Medium Wave Infrared (Quartz) Heaters consist of a helically wound resistance coil housed in a pure vitreous silica fused quartz tube. The Quartz tubing is terminated with specially designed insulating caps, which are securely fastened to the quartz tube with high temperature cement providing excellent support to the power connecting termination. Quartz Heaters are designed to be used in a horizontal position only. Quartz Heaters are available in various diameters like 8,10,12,15,19 mm & length 300 to 1500 mm.

• wavelength: 1 to 2 microns

We offer Twin tube infrared lamps made of high quality quartz glass. The unique design enables high radiation power as well as excellent mechanical stability. These are available with Gold reflector coating for high thermal efficiency. The advantage of twin tube lamp is that it allows more wattsinch as compared to single tube lamps. It is thus possible to attain higher temperatures in shorter times.

twin tube medium wave infrared heater, Thermocouple, Strip Heaters

twin tube medium wave infrared heater, Clean Room Doors

infrared tube heaters, Ceramic Heaters, Cartridge Heating Element

twin tube medium wave infrared heater, Coil Heater, Strip Heater