Injectable Dry Powder Filling Machine Dealers

• Driven Type: Electric
• Voltage: 240 V
• Usage: Industrial
• Material: Stainless Steel
• Capacity: 2000 pouch per hour
• Automation Grade: Automatic
• Frequency: 50/60 Hz
• Phase: Single Phase

• Weight: 1000-2000kg
• Automatic Grade: Automatic
• Driven Type: Electric
• Warranty: 1year
• Voltage: 220V

The injectable vial filling machine dispenses sterilized powder through a set of two powder hoppers that are vibrated by mechanical agitators. Each wheel has a piston used to meter the powder being feed to vacuum space between the hopper and piston as well as a doctor blade to scrap off excess powder.   Salient Features  Robust and vibration free design Minimum changeover time Compact & versatile design Easy to clean Suitable for different volumes   Application Filling     Industry  Pharmaceuticals Veterinary Cosmetics

Automatic High Speed Injectable Powder Filling with Rubber Stoppering Machine is a Double wheel Double Track Powder Filling Machine with Vibratory Rubber Stoppering Unit to feed higher quantity of rubber stopper to the feeding chute for High Speed Performance of Machine. This Machine is mainly used to fill two different product in one vial or to fill Double dosing product at the speed of 250 Vial / min.     The incoming dry vials (sterilized and siliconised) are fed through the unscrambler with suitably guided on the moving delrin flat conveyor belt at the required speed of the correct placement below powder wheel. The sterilized powder stored in two powder hoppers is agitated by pair of mechanical agitators for maintaining consistency and uniform bulk density, each powder wheel having eight ports rotates at the pre determined speed below the powder hopper with practically no clearance. Powder wheel consist of Piston in each port and behind the powder wheel, vacuum plate is provided there is no clearance between powder wheel and vacuum plate due to back spring pressure. Precise volume of powder is sucked in to the port of powder wheel during vacuum according to the piston length different fill size can be achieved. The excess powder is doctored off by a doctor blade, the doctor blades can also be adjusted from outside without removing powder hopper. When powder wheel indexes further and remain in the port due to the vacuum till it reaches just vertically above the vial. The time dose of Compressed air, sterilized low pressure air or Nitrogen Gas sequentially flushes out powder from the port of powder wheel in to the container one by one. It is a double wheel Double track machine, so each powder wheel is filling vials alternately with double track system. The filled vials are immediately separated on the conveyor by vial separator and moves further for stoppering operation. (Different grooves separator can be used which depends on the container diameter or multiple dosing system.) After separated from vial separator, vials move further towards rubber stoppering unit and in between it will be converted in to single track from from double track with the help of suitable guide rails on machine conveyor. The sterilized and siliconised rubber stoppers stored in the vibrator bowl moves vertically to the rubber stopper chute. The vial is hold firmly between pair or timing belt to pickup rubber stopper from exit end of the chute. Further the vials are passed between two pressing roller for tight fit fixing of rubber stopper. After stoppering operation, vials will be collected in to the Scrambler and move towards sealing machine for Vial sealing operation.

Salient Features: Total cGMP Model. Total contact parts are of S.S. 316, and other surface parts are of S.S. 304. Automatic speed control system.  “NO VIAL – NO FILLING SYSTEM “Which reduce the wastage of costly powder. As the Machine is attached with Rubber Stoppering unit, it reduces the space in sterile area & finally the space of laminar flow unit.  Multiple dosing systems – with the help of change parts. High accuracy for filling costly powder – (+ or -) 1%. All contact parts are easily removable all sterilization. Elegantly matt finished body. Inbuilt protection against over current, Voltage fluctuation, Short circuit in. Standard in quality & economical in price.  

We offer automatic injectable dry powder filling with rubber stoppering machine. Automatic injectable dry powder filling with rubber stoppering machine

• Model: HPF-240 (Double Powder Wheel & Hopper)
• Production Output: 80 to 240 vials per minute (Depend on fill size)
• Vial Sizes: 5ml to 30ml Glass Vials (Dia. 22mm to 38mm)
• Rubber Stopper: 20mm (With the help of change parts)
• Filling Capacity: 50mg to 1.5 grams in single dose, 1.5 grams to 6 grams in double, triple and four dose (with help of change parts)
• Filling Accuracy: + 1 % depending upon consistency and uniformity of bulk density of sterile powder of under controlled level of humidity (Below 28% Rh)
• Electrical Supply: 3 H.P.
• Powder Requirements: 3 Phase, 415 Volts, 50 Hz
• Conveyor Height: 850mm to 900mm Adjustable
• Dimension: 3650mm (L) X 1000mm (W) X 1700mm (H)
• Net Weight: 1050 Kgs.
• Gross Weight: 1400 Kgs.

• Power supply: 0. 5 H.P., 230 Volts, 1 Phase
• Machine Size: 525 mm (L) X 600 mm (W) X 650 mm (H)
• Fill Accuracy: ±1% depending upon consistency and uniformity of bulk density of injectable powder
• Product Loading: On Provided Bottle platform
• Powder Suction: Through Vacuum
• Powder Delivered: Through Air/Nitrogen (Customer to Provide)
• Vial Diameter: 25 MM To 45 MM MAX.
• Vial Height: 75 MM MAXIMUM.

Semi automatic injectable dry powder filling machine is an affordable solution developed by N.K Industries for low and moderate production requirement for complex injectable pharmaceutical companies. Salient features: Our semi Automatic Injectable dry Powder Filling machine has following inherent feature: CGMP Model. Powder dosing system is based upon the vacuum pressure dosing technique. Bottle feeding is done manual on bottle loading platform. All Part comes in contact with powder are manufactured using SS 316L. "No Vial – No Filling" system eliminates wastage of costly powder. Overload Relay for any overload accident. Flexible to suit from 5 ml. to 50 ml. vials. All Contact Parts are of S.S 316L. Quick change over with minimum use of tools. Contact parts are removable for mandatory autoclaving.   Vacuum Line 800 mm hg (9/10 cfm)Nozzle Dia. 6.5 (Flexible Tube Connect with Clamp) Air Line Filtered, Oil Free sterile low-pressure air or inert gas at 2 kg. cm² pressure (8/9 cfm)Nozzle Dia. 6.5 (Flexible Tube Connect with Clamp) Filling Speed 40 fills/ min. for Single Dose, 20 fills/ min. for Double Dose, 12 fills/ min. for Triple Dose, 10 fills/ min. for Four Dose (Depending up on size/types of vial & powder density) Powder Fill Size 50 mg to 1.5 grams. Single Dose (with Change Parts)1.5 grams to 6 grams. Double, Triple and Four Doses.Fill range depending upon vial opening and bulk density of powder. Under controlled level of Humidity (i.e. 25%)  

Direction Left to Right Production Rate Up to 120 Fills/Min. for single dose.Up to 60 Fills/Min. for double dose.Up to 40 Fills/Min. for triple dose.Up to 30 Fills/Min. for four dose. Fill Capacity 50 Mg to 1.5 Grms. single dose (with help ofchange parts).1.5 Grms. to 6 Grms. double, tripleand four dose. Fill range depending upon vialopening and bulk density of powder. Accuracy ± 1% depending upon consistency and theuniformity of bulk density of injectable powderunder controlled level of humidity (i.e. 25%). Electrical Supply 5.0 HP Power Requirement 415 Volts, 3 Phase (4 Wire System), 50 Hz. Height of Conveyor Adjustable from 900 to 950 MM Dimensions 3028 MM (L) x 1093 MM (W) x 1885 MM (H) Net Weight 800 Kgs. (Approx) Gross Weight 1200 Kgs. (Approx) Fill sizes 50 mg. to 6 grms Vial Sizes 5 ml. to 30 ml. Rubber Stopper Sizes 20 mm

• Vial Sizes: 5ml to 30ml Glass Vials (Dia. 22mm to 38mm)
• Electrical Supply: 3 H.P.

Harsiddh engineering Co. provides manufacturers a large variety of powder filling machines that caters for different manufacturer’s preferences and production environment. The double wheel injectable dry powder filling machine offers superior throughput as compared to the single wheel type. This machine is able to fill 80 -220 vials every minute and hence suitable for high production packaging centers. They have a filling accuracy of 99% (+ 1 %). To boost production rates, save packaging space and reduce cost; these machines are equipped with a rubber stoppering unit which fixes a rubber stopper on the vials.The machine dispenses sterilized powder through a set of two powder hoppers that are vibrated by mechanical agitators. Each wheel has a piston used to meter the powder being feed to vacuum space between the hopper and piston as well as a doctor blade to scrap off excess powder.

• Vial Diameter: 25mm to 38mm
• Rubber Stopper Diameter: 20mm

The Automatic Injectable Powder Filling with Rubber Stoppering Machine Model DRYFILL-120i, is suitable for Round Vials with maximum speed of 120 Vials per minute. Specially Machine construction in fully Stainless Steel finish including machine frame structure. Machine with built-in Turn Tables at In-feed and Out-feed with individual drives to match the speed of incoming and outgoing vials for smoother operation. All parts coming in contact with Powders are made from Ss316 Materials.

• Overall Dimension: 2100mm (L) X 842mm (W) X 1700mm (H),2300mm (L) X 842mm (W) X 1700mm (H)
• Container Diameter: 25mm to 38mm

Automatic Injectable Powder Filling & Rubber Stoppering Machine having eight ports in a powder wheel. The precision built welded steel frame is encompassed with stainless steel sheets with access doors for servicing the machine. Adinth offers two models in this machine, first is Automatic Single Wheel Injectable Powder Filling & Stoppering Machine which provides output up to 7000 vialshour and second is Automatic Double Wheel Injectable Powder Filling & Stoppering Machine provides output up to 14000 vialshour. All contact parts made for Good house keeping and complies as per current good manufacturing practice (cGMP).

• Net Weight: 1250 Kgs. (Approx)
• Gross Weight: 1450 Kgs. (Approx)

Direction Left to Right Production Rate Up to 240 FillsMin. for 10 ml. Vial Fill Capacity 50 Mg to 1.5 Grms. single dose (with help of change parts), 1.5 Grms to infinite number of doses. Fill range depending upon vial opening and bulk density of powder. Accuracy ± 1% depending upon consistency and the uniformity of bulk density of injectable powder under controlled level of humidity (i.e. 25%).

Total Table top cGMP model. “NO VIAL, NO FILL” System eliminates wastage of costly powder. Spring loaded Teflon top seal for powder hopper reduces the friction between and top seal and avoid chance of white particle shading during production. Doctor blade and wiper blade can be adjusted from outside also without disturbing any production, which saves lot of time, powder wastage and chances of area condition disturbance. All assemblies under top plate are positioned as for easy cleaning or maintenance. Multiple dosing of injectable powder or changeover of container size and different fill size is possible by just changing the vial separator or size of the piston respectively. All driving is through High quality Gear motor for better machine performance without vibration or leakage of oil of area floor from gear box. Machine speed can be adjusted through A.C. Frequency drive, which is time saving and easy to synchronise unscrambler and scrambler speed with machine speed. Machine is provided with delrin conveyor belt to avoid sticking of vial on conveyor. Special clutch devices are provided on vial separator for safety purpose. Vibratory bowl for rubber stoppering unit support to run machine with total claimed speed of machine. Vacuum filter will be of PVC transparent material with nylon cartage having length of 10”. Pure air filters for Air and Vacuum.

• OUTPUT: – 60 To 240 Vials/Min
• SYSTEM: Dust Collection System
• Suitable: Suitable For 5ml To 30ml Vial
• change: No Required Any Change Parts

automatic injectable dry powder vial filling machine – jdm pharmatech’s line of products has been created to match the pharma industry’s needs. we are one of the leading manufacturer and supplier of injectable dry powder filling machines in ahmedabad. our automatic injectable vial filling machine has been designed for automatic filling of dry powder in the vial. this is a completely automatic machine that has been designed as per the industry standard and matches quality specifications. our machine has a varied capacity to fill 20 or 240 vials per minute, thereby enhancing the entire process. besides, our automatic injectable dry powder filling machine is equipped to fill 5 ml to 30 ml vial (without replacing change parts). the machine also places the rubber stopper on the vial to prevent any kind of contamination. this machine is highly workable as it assures satisfactory performance. this dry powder filling machine is highly durable and made to last long, even in a longer work cycle without technical breakdown. we are one of the leading injectable dry powder filling machine manufacturers in india. our state of the art technology and round the clock customer support has made us the leading choice of dry powder filling machine supplier in india. if you want to place an order for a dry powder vial filling machine, and are looking for the best dry powder filling supplier in ahmedabad or india, then we are your trustworthy partner.  

• Model No: LPFS 100
• Dimension: 2500mm, 900mm, 1700mm

Injectable Powder Filling & Stoppering Machine Model – LPFS 100. The Basic Unit Consists Of One side Turn Tables, S.S. Slat Conveyor Belt, Unique powder wheel.The Machine Can Be Run Totally Through Touch Screen HMI, PLC Control And The Machine Is Based On Servo Motor Drive, The Machine Has an Output Speed of 120 Vials per Minute but Depending upon the Fill Volume and Container Dia. size Or the Quality of Powder

• Fill Capacity: 50 mg. to 1.5 gms
• Container Diameter: 25mm to 38mm

The sterile dry powder filling with rubber stoppering machine is a comprehensively designed compact sized model used for filling and stoppering of dry powder injectable into the vials. It comprises of a precision built frame that is coated with the stainless steel sheets with access doors. The model is designed sophisticatedly in accordance to the cGMP standards.

Dry Injection Powder Filling Machine is suitable to fill injectable powder into vials. The precision built welded steel frame is encompassed with stainless steel sheets with access doors for servicing the machine. 

injectable dry powder filling machine, Filling Machines, Conveyor