Instrument Valves Dealers

• Type: Screwed Bonnet Needle Valve & Integral Bonnet
• Size: 1/8 to 1 Inch
• Material: SS, CS and other Material on Request
• Rating: Up to 6,000 psi @ up to 1200ºF
• Stem: Needle tip (Standard), Non routing (Optional)
• Packing: Teflon™ & Grafoil
• Seat: Integral
• Connections: Tube End
• Body Stock: Bar Stoke & Forged Steel
• Minimum Order Quantity: As per Customer Needs

g-lok needle valves. g-lok range of needle valves is designed for leak free closure, regulations & management of fluids in process systems. features :- 1) available in stainless steel 304 & 316. 2) compact design specially for instrumentation. 3) variety of end connections includes male female npt, bspt & bsp. 4) every valve is factory tested. 5) pressure rating from 3000 psi to 10000 psi.

We are manufacturer and supplier of hi-pressure instrumentation valve needle valve, 2,3,5 valve manifold,ball valve,thermowel, mono flange compression fitting flair fittings all hydro pneumatic accessories etc.

With the leading market standards and customers' demands, we have developed a system that allows the clients to pay in online and offline as per their preferences. Stay rest assured for the products that we offer as they will remain damage free. For this, we make use of only premium packaging material for the packing of the products. Features: Positive shut off Longer life Quick in action No lubrication

Features   All AKI Instrument valve including those used with instrument Air Feed Headers are produced for working pressure 6000 PSI. Stem design with no turning action on closure thus preventing galling. Threads Protected from process media. Forzed or Bar Stock Construction in straight or angel pattern with panel mounting type. Screwed bonnet, union bonnet and integral body bonnet construction, Valves. Metal to metal or stellited and non rotating tip stem for high pressure, Teflon seal for positive repetitive shutt off for low density gases and non lubricating fluide. Special Telfon as grafail packing for leak proof joint at various temperature. The Sophisticated and costly instrument used in complex plants need to be installed according to certain carefully laid down safeguards using selected and reliable accessories. Most of the instrument valves produced without any adherence to the rigid codes of the instrumentation industry are unsafe to high pressure use. These Valves cheaply produced have common deficiencies:Their seal just an 'O' ring Spindle cannot take wear. Leakage due to galling at the tip Spindle Which rotates on closure is prone to galling Normally threads are in contact with process media. AKI Needle Valve are specially designed to eliminate all the above deficiencies and produced under rigid qually control from basic raw material stage. Valves are precises machining on mordern machinery to provid high quality and low cost, to meet the exacting standards of our valuable customers.

• Material: Metal
• Certification: ISI Certified
• Feature: Casting Approved, Corrosion Proof, Durable
• Physical Features: Pressure rating 400 kg/cm2
• Working pressure: 6000 psi (431 bar)
• Testing: For seat and seal leakage with a leakage rate of 0.1 std. Cm3

Ball valves are manufactured by us as per BS 5351 & API6D. We are one of the few manufacturer of metal seated ball valves. Ball valves manufactured by us in various pressure class upto class 2500. Testing standard as per BS 6755 P-I & II and API6D. Ball Valves are used in a wide variety of high pressure applications. Two factors make them popular. First, a full unrestricted flow that allows no product restrictions through the valve. Second, the three piece design and the removal of a minimal number of bolts allows service to be performed without removing the complete valve from the line.   With the help of our highly skilled professionals and using advanced production techniques, which are especially designed and developed using cutting edge technology for highly corrosive application. While manufacturing High Pressure Ball Valves supreme quality raw material in accordance with set international quality norms.   Two way ball valves manufactured by us will be various Sizes, End connections and Pressure Ratings as per customer requirements. Manual and Pneumatically actuated valves are also manufactured by us.   Key Features SS 316 construction for corrossion resistance, full or reduced bore for excellent flow.3 piece design.peek/delrin seat for better performance. Ball hard chrome plated for smooth operation.   Hydro Tests Performed with pure water at 1-1/2 times of the working pressure. Other tests like helium, seismic are availbale upon request.

They are used to connect to pressure transmitters. Manifolds eliminates several parts used in conventional piping and hence reduces cost. They are very compact in design and hence reduce lot of space requirement. They come in variety of types as shown below. Types of Manifold Valves based on number of valves - Two Valve Manifolds - Three Valve Manifolds - Five Valve Manifolds There are no available standard specification for double ferrule compression fittings. The following two standards which are applicable for Single compression fittings can also be used for double compression fittings. - BS 4368 Part IV : 1984 - IS 10103 :1982

The Instrument Check Valves that we deal in ensure leak-free and secure connections and also ensure the lowest cost involved in the checking of any instrument today. Our elaborate range of steel instrument check valves has proved beneficiary to many of our clients in the recent years and we hope to cater to more sectors with the quality products that we deal in. These products that we deal in also have higher pressure handling. For all these features made available to our clients, we are reckoned to be one among the best Check Valves exporters and suppliers from India. Feature Working pressure range to 3000 PSI (206 bar). Temperature rating to 250ºF (121ºC) with Buna O-ring. Minimum flow resistance. Inline check valve. Instant shutoff in upstream condition. 100% factory tested. Locks pressure in consumer. Stops reversed flow to protect instrumentations. Purge system. Suitable for gas or liquid. Material Body : S.S. 316 or Brass Poppet : S.S. 316 O-ring : Buna-N for S.S. 316 & brass body. Spring : S.S. 304 for S.S. 316 & brass body. Material Temperature Rating VITON : -23ºC to 191ºC (-10ºF to 375ºF) Buna-N : -23ºC to 121ºC (-10ºF to 250ºF) PTFE Ethylene: -46ºC to 232ºC (-50ºF to 450ºF) Propylene : -46ºC to 149ºC (-50ºF to 300ºF)

iSteel delivers and trades Stainless Steel 304 Instrumentation Valves to a broad assortment of endeavours over the globe. We have a highly equipped inventory in Mumbai, which helps us produce outstanding products. Our SS 304 Instrumentation Valves are chromium-nickel containing austenitic stainless steels with an outstanding corrosion resistance. 304 Grade is by and large used for its properties such as weldability and ease of formability. Our ASTM A182 Needle Valves are utilized as a part of oil and gas, petrochemical, military, pharmaceutical and so on. These SS 304 Valves offer impenetrability to a broad assortment of climatic conditions and destructive media. We offer 304 Valves in various sizes and thicknesses to meet customer specific essentials. These UNS S30400 Ball Valves find use in various industrial as well as household applications like gas processing, power generation, seawater equipment and more. We offer 304 SS Instrumentation Valves in different sorts SS 304 Ball Valves, SS 304 Check Valves, SS 304 Needle Valves and SS 304 Butterfly Valves. Our products are highly demanded by clients from across the globe for their quality and outstanding finish. ASME SA276 Type 304 Stainless steel Packless Valves, Buy High Quality of SS 304 Relief Valves, SS 304 Syphons, SS 304 Ultraclean Valves, ASTM A351 SS 304 Condensate Pot supplier, SS 304 Seal Pot and Snubber‎, Offer Best Price on range of Stainless steel 304 Piping Accessories, SS 304 Medium and High Pressure Valves Dealers, SS 304 Diaphragm-Sealed Valves Manufacturer in India.

Virgin Engineers Ball Valves are available in size from 1/8” to 1”with double ferrule, NPT, BSP, BSPT male/female, end connections. These valves are designed for application on instrument lines, gas sampling lines, pneumatic systems, pilot plants, analyzer labs, etc. These valves perform on/off functions. Type: 2 way, 3 way, 4 way, 5 way, 1 piece, 2 piece, 3 piece, Quarter turn, Half turn, Full turn i.e. ‘T’ port(full turn). Available in SS304, SS316, Alloy-20, Inconel, Monel, Titanium, Hastelloy, etc.

BAXCELL ball valves have very low operating torques and a range of seat materials providing excellent process environmental compatibility. Our seats offer wide process compatibility whilst maintaining a positive sealing across the entire operating range. This high level of seat integrity allows both vacuum and high pressure services from one valve. Recommended for use in Oil, Gas, Petrochemical and general duty applications where reliable long term performance is essential. Stopper for ¼ turn shut-off is standard on all pressure ranges and sizes. Valves with locking devices are available upon request. BAXCELL ball valves are subjected to three pressure tests: [a] Hydrostatic test at 1.5 times working pressure [b] Low pressure pneumatic test at150 PSI (15 bar) [c] Shell test to 1.5 times working pressure.

Instrument Needle Valves & One valve Manifolds   The instrument valves can be used for shutting off impulse lines or for isolation of pressure instruments. All valves are standard stainless steel and optional available in exotic materials, such as Hastelloy® and Monel®. This valve has a non-rotatable conical tip to ensure perfect alignment. Badotherm valves are manufactured within the European Union.

Body Materials: SS 316, SS 316L, SS 321, Duplex 2205, Titanium, Alloy 400, Alloy 625, Alloy C-276.  Pressure Rating: 6000psig (414 bar). Temperature Rating: -53°C (-65°F) to 232°C (450°F). Size: 1/2″, End Connection: NPTM/NPTF. Threads with smooth surface finish avoid galling and help to extend the fitting service life.

Tremor Alloys is one of India’s leading manufacturers of high quality Gate Valves which find application across diverse sectors. A gate valve, as well recognized as a sluice valve, is a type of valve that unlocks by lifting a rectangular or round gate wedge out of the pathway of the liquid. The discrete aspect of a gate valve is the closing surfaces amongst the seats and gates are planar; therefore gate valves are time and again used when a straight-line stream of liquid and least constraint is looked-for. Meanwhile, the gate faces can create a wedge shape or they perhaps can be similar to each other. Our products can be offered in made to order length sizes and shapes, and are available at market leading prices. Instrumentation Valves Specification : End Connection : Screwed (NPT BSPP BSPT), Socket weld, Compression tube fitting ends Maximum working pressure : 2000 PSI at 100°C Material : CS, 316 SS 316L SS 304 SS Size : ¼" to 1” Form : Ball Valve, Gauge Valve, Needle Valve, Check Valve, Maniflod Valve, Plug Valve

We are offering instrument manifold valves. » air header distributer type : bar stock » air header distributer type : pipe

With the help of our experienced team of professionals, we are offering an extensive range of instrumentation valves. Our offered range is moulded using finest quality raw material by our reliable vendors in compliance with latest market trends. Durability, reliability and high performance are some of the features of our products that are highly appreciated among the clients. Our products are tested on various parameters to ensure their high quality. Further, clients can avail these products from us at the most reasonable rates.

• Material: Stainless Steel
• Pressure: High Pressure
• Size: 1/4" TO 2"
• Model Name/Number: PEDPMBV1
• Brand: PANAM
• Usage/Application: Gas

The FLUID-LOK manifolds are usefull for a lot of applications by the way of several configurations and design. A range of manifold valves are manufactured and supplied. Our manifold valves range comprises of manifold instrumentation valves, valve manifolds, 2 way manifold valves and two way valve manifolds. They combine all the operations in a single unit, reducing the quantity of accessories involved, saving mounting hours and reducing leak risks. Also they have a low cost of purchase and maintenance.

Instrument valves in a variety of types and different configuration. It is widely used in various applications to flow only in one direction. We utilize most high quality raw materials for manufacturing these check valves in absolute manner with industry norms. The offered products are accessible in every standard size at ostensible costs.

FAV Instrument Ball Valve have been carefully manufactured and tested for High Pressure Applications. Our Instrument Ball Valve are available in a variety of materials and end connections .They are highly durable and provide effective performance without any leakage. Instrument Ball Valves offered by us, are used primarily on upstream offshore/onshore oil production and initial processing installations. Made from high quality carbon steel and brass these Ball Valves provide speedy one fourth turn shut off. These valves either provides the directional control of fluids consumed in process power and instrumentation function. Our ball valves come at reasonable price and are in great demand due to its high quality and performance End connection options include male / female NPT, Tube OD Ferrule Compression , and ISO threads from 1/8″ to 1″. Configurations include 2-way, 3-way (side / bottom entry) and 4-way valves. Optional features include panel mounting, locking devices and upstream / downstream venting. Instrument Ball Valve manufacturer and Exporter . We make High Pressure Instrument Ball Valves of various type. Standard sizes of Instrument Ball Valve in stock. Instrument Ball Valve has come with a wide variety of port sizes, end connections, style, and temperature and pressure tolerance. FAV Instrument Ball Valve are critical for instrumentation, fluid and process control system. Advantages of Instrument Ball Valve? 1. Low operating Torques 2. Variety of end connections includes Male / Female NPT, BSPT, BSPP 3. Every valve is factory tested 4 .Innovative Compact design 5. Available in variety of material

With desire to cement our reputation in the market, we are engaged in offering an excellent range of Instrumentation Valves. Keeping in mind current market development, these valves are manufactured by vendor's qualified professionals employing premium quality raw material and modernize tools. Apart from this, our quality controllers perform a series of test on the entire range ensuring its flawlessness. Clients can avail the offered valves from us at market leading prices. Features : Rust proof Durability Require less maintenance

• Size: 100-150mm, 150-200mm, 200-250mm, 250-300mm, 300-350mm, 350-400mm, 400-450mm, 450-500mm, 50-100mm
• Material: Alloy Steel, Carbon Steel, Forged Steel, Stainless Steel
• Application: Instrument
• Weight: 10-20kg, 20-30kg, 30-40kg, 40-50kg, 50-60Kg, 60-70kg
• Color: Black, Brown, Grey, Sky Blue, White
• Pressure: High, Low, Medium
• Feature: Blow-Out-Proof, Casting Approved, Corrosion Proof, Durable, Good Quality, Investment Casting

instrument valves, forged instrument pipe fittings, valve manifolds