Integrity Tester Dealers

• Features: Easy to operate, good quality, high strength

• Material: Plastic, Stainless Steel
• Display Unit: Psi
• Automation Grade: Manual
• Accuracy:  ISO 10648-2
• Test Time: 10 min

• Application: By using the reflected wave method, the instrument is used to assess the integrity of concrete pile
• Brand Name: ZBL
• Power Source: Lithium battery
• Capacity: >144(dB)
• Frequency: 1-10K(Hz)
• Display: PDA With sunlight viewable touch screen display

• Brand Name: SolGeo
• Temperature: 0-60 DegreeC
• Pulse Duration: Selectable,1 to 65000 us
• Voltage Out Transmitter: Selectable,100V to 1200V
• Transmitter Pulse Repetition: > 20 misure/second
• Recharging Time: 4h
• IP Rating: IP 65
• Autonomy: 0.8W Standby / 1.6W Ultrasonic active
• Travel Time Resolution: 100 ns
• Converter Type: 2 A/D x 12 bit converter
• Channel: 2 input / 1 transmitter
• Amplifier: 1 to 1024 software selectable
• Sample per Event: 1K to 8K for channel
• Bandwidth: > 1 MHz

PIT performs Low Strain integrity testing, also called Sonic Echo or Pulse Echo Testing. The PIT may be used for auger cast-in-place (CFA) piles, drilled shafts, driven concrete piles, concrete filled pipes and timber piles.

• Country of Origin: Made in India
• Brand Name: Square Technologies
• Application: Gloves Testing
• Material: Stainless Steel
• Automation Grade: Automatic
• Height: 1100 mm
• Depth: 300 mm
• Width: 900 mm
• SS Grade: SS304
• Model Number: GLT 1

• Capacity: 50-kilogram force
• Power supply: 220V AC, 50 Hz on the single phase

Seal integrity test method helps to determine the channel in the seal. Visually detecting the package seal is dependent on the size of seal channels and the degree of contrast from unsealed and sealed areas. The test method is applied to the packages with at least one side so that it can be viewed clearly.

Quantek Head Space Oxygen Analyser Quantek is an expert for analysing various gases especially Oxygen in Vials. Model 905V is one of the most successful and robust models in the Industry. Pharmaceutical preparations packaged in vials are often gas-flushed to provide a specific atmosphere in the vial

Our organization is involved in providing a qualitative Pile Integrity Tester to our customer. These test are performed by pulse echo or Transient Response Method used to test piles integral in the structure. Pile Integrity Tester is available in several configuration to meet the needs of the customer. It provide high quality services to our esteemed clients.

• Power Source: Electric
• Weight: 1.36 kg
• Capacity: Up to 100 piles/hours
• Usage: Industrial
• Accuracy: 0.05 %

Filter Integrity Tester Integtest series are special instruments of integrity testing for sterile filtration membrane and filter system, where the testing method and instrument design fully meet the requirements for relevant laws and regulations in GMP, EP and USP.     

Pile integrity test is used to assess the continuity of piles. With this test, necking or bulging and uniformity of quality of concrete is checked.Piles that are doubtful for integrity are taken up for Dynamic load testing along with some piles which are ok. Method of Testing : There are Indian Standards for the pile integrity test & the most commonly used worldwide is Pile Integrity Test as per ASTM – D 5882 – 00, “Standard Test Method for Low Strain Integrity Testing of Piles”. Relevant clause from the said ASTM standard is reproduced below: Clause no. 5.2.3 : Placement of Transducers – The motion sensor should be placed at or near the pile head using a suitable, or temporary, bonding material (that is wax, vaseline etc.) so that it is assured that it correctly measures the axial pile motion. The motion sensor is placed generally near the center of pile. Additional locations should be consi...

• Weight: 1.24Kg
• Product Model: VS-P800
• System Noise Voltage: Less than 2 mV
• Dynamic range: More than 138dB
• Amplifier Band: 10Hz-10kHz
• A/D Resolution: 16-bit A/D
• Sampling time interval: 2us-32768us
• Sampling Length: 1024, 2048, 4096
• Time indication error: Less than 1%
• Channel Number: One
• Amplification factor: 1-128
• Data transmission mode: Wireless Cloud Transport (Options)
• Trigger mode: Signal triggering
• Sensor Sensitivity: 100 mV/g
• Sensor frequency band: 1-10000Hz
• Continuous working hours: More than 10 hours
• Power Supply: Built-in rechargeable lithium battery (+7.4V)
• Display: 640*480 Capacitance Screen
• Operational mode: Touch
• Size: 220x160x50

Provide a Pile Integrity Tester (PIT) or an equivalent equipment. The equipment shall have the following minimum requirementsThe analog to digital resolution shall be at least 24 bits. • The sampling frequency shall be at least 25,000 Hz. • Data shall be stored such that additional processing or further wave analysis is possible.

• Screen Type: Color Lcd Display
• Usage: Dynamic Pile Testing

Bio Process Bag Integrity Tester, Glove Integrity Tester, RTP Integrity Tester

pile integrity tester, Rebound Hammer, rebar detector, analyzer

System Integrity Tester Improves reliability of "Railway Signaling Interlocking" by Automating the Test process Test Case Generation Test Case Execution Validation of Test Results Produce Test Results document for Evidence.