Ionization Detectors Dealers

FLAME IONIZATION DECTECTION (FID) The Series 4000 FID platform is highly flexible. In its most basic configuration - the Model 4020 - Teledyne provides a continuous analysis of the total hydrocarbon (THC)

• Country of Origin: Made in India
• Brand Name: Apollo
• Usage/Application: Office Buildings
• Alarm Sensor Type: Ionization
• Color: White
• Shape: Round

Key Features: Wide operating voltage Advanced electronic technology Flashing LED option Magnetic test switch option Can be used on security systems Electrically and mechanically compatible with Series 60 Proven detection performance Range of bases available

We are offering best Ionization Smoke Detector The Context Plus XP95 ionisation smoke detector has a moulded selfextinguishing white polycarbonate case with wind resistant smoke inlets. Stainless steel wiper contacts connect the detector to the terminals in the mounting base. Inside the detector case is a printed circuit board that has the ionisation chamber mounted on one side and the address capture, signal processing and communications electronics on the other. The ionisation chamber system is an inner reference chamber contained inside an outer smoke chamber. The outer smoke chamber has smoke inlet apertures that are fitted with an insect resistant mesh. The radioactive source holder and the outer smoke chamber are the positive and negative electrodes respectively. An Americium 241 radioactive source mounted within the inner reference chamber irradiates the air in both chambers to produce positive and negative ions. On applying a voltage across these electrodes an electric field is formed. The ions are attracted to the electrode of the opposite sign, some ions collide and recombine, but the net result is that a small electric current flows between the electrodes. At the junction between the reference and smoke chambers is the sensing electrode that is used to convert variations in the chamber currents into a voltage. When smoke particles enter the ionisation chamber, ions become attached to them with the result that the current flowing through the chamber decreases. This effect is greater in the smoke chamber than in the reference chamber and the imbalance causes the sensing electrode to go more positive.  

System Sensor 200 Series intelligent plug-in smoke detectors with integral communication provide features that surpass conventional detectors. Detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector�s address to be set with decade address switches, providing exact detector locations for selective maintenance when chamber contamination reaches an unacceptable level. Model 1251B ionization detector incorporates a unique single source, dual chamber design to respond quickly and dependably to a broad range of fires. Specification Height : 2.0 inches (51mm) Diameter 6.1 Inches installed in B210LP base4.1 inches (104 mm) installed in B501 base Shipping Weight Heat 4.8 oz. (136 g)Photo/phot with heat 5.2oz. (147 g) ion 5.4 oz. (153 g) Operating Temprature Range Ion Photeo : 32-1200F (0-490C)Photo with Thermal 32-1000F (0-380C)Thermal : -4-1000F (-20-380C)High Temprature : -4-1500F (-20-660C) UL Listed Velocity Range Ion : 0 - 1200 fpm (0 - 6.1 m/secPhoto with Thermal : 4000 fpm Suitabe For Installation in ducts Insect Screen Hole Size Photo : 0.016 inch (0.41mm) nominalIon : 0.035 Inch (0.8mm) nominal Relative Humidity : 10-93% noncondensing Thermal Rating Fixed Temprature Setpoint : 1350F (570C)Rate of Rise Detection : 150F/min (8.30C/min.)High Temprature Heat : 1900F (880C) Voltage Range : 15-32 Volts DC Peak Standby Current (Max. Avg.) Ion/Thermal : 150 pA @ 24 VDC (without communication, LED off) 150 pA @ 24 VDC (one communication every 5 sec. with LED enabledPhoto/Photo With Thermal : 250 pA @ 24 VDC (without communication LED off), 300 pa @ 24 VDC (one communication every 5 sec. with LED Enables) LED Current (Max.) : 6.5 mA @ 24 VDC (on)

Air in the dual sensing chambers is irradiated to produce ions that travel to the positive and negative electrodes, creating a current flow. As smoke enters the outer chamber, the flow drops and the voltage increases. The detector will then enter the alarm state and the indicator LED lights up.

• Type: Ionization Detectors
• Material: Aluminum, Fiber, PVC
• Application: Detecting, Industrial Use
• Certification: CE Certified, ISO 9001:2008
• Color: Black, Brown, Grey, Light Grey, Silver, White
• Voltage: 110V, 220V, 230V
• Power Source: Battery, Electric
• Feature: Built In Speaker, Light Weight, Micro Controller Based, Saving Power, Sensitivity Adjustment, Waterproof
• Warranty: 1year, 2year
• Sound: Beep, Light Blinking, Siren

We supply high grade Wireless Ionization Smoke Detectors at reasonable prices. Our Wireless Ionization Smoke Detectors comes with photoelectric infrared LEDs and can be easily mounted on ceilings. These Wireless Ionization Smoke Detectors are appreciated for their high performance and efficiency. We cater to both small and large orders of Wireless Ionization Smoke Detectors as per client’s needs.Features : Photoelectric infrared LED. Ceiling mounting Not emit radioactive element. Send status signal every 15 seconds or 65 seconds. Auto send resetting signal.

The ToxiRAE Plus PID is the world’s first and only pocket-sized data logging Photo ionization Detector (PID). Its small size brings the “broad-band” capabilities of the PID/VOC detector to a personal level for 10 hours of continuous and instantaneous monitoring of volatile organic compounds (VOCs). The ToxiRAE PID is a very convenient tool that alarms to warn of excessive exposure. Applications include VOC threshold detection in HazMat, environmental cleanup, or industrial applications.

The BID achieves over 200 Xs higher sensitivity for organic compounds over a TCD. In addition, conventional analytical techniques require a GC system configuration with multiple detection schemes to analyze for permanent gases and light hydrocarbons. The use of a methanizer and FID is often required to detect ppm levels of CO and CO2. However, the BID replaces all of this hardware and allows for the highly sensitive detection of mixtures of inorganic gases and light hydrocarbons.

ionization smoke detectors, duct detector, main control panel

Ionization Detector, C Mount Camera, switchers, Connectors

Ionization Smoke Detector, Photoelectric Smoke Detector

flame ionization detector, ultraviolet flame detector

Ionization Detectors, light sensors, ph sensors, Toxic Gas Detectors

Ionization Detectors, Medical Equipments, osmometers

Ionization Smoke Detector, Wired / Wireless Burglar Alarm, eas tag

Photo Hydro Ionization Detectors, Cross Cultural Learning, Facilities, Dosti

Ionization Chamber Detector Rk, Hi-psi Patient Detectors

Ionization Smoke Detector, electronic sounder, Sensor Smoke Detector

ionization smoke detectors, Access Control Systems, CCTV Camera

Ionization Smoke Detector, Security Equipments

Intelligent Ionization Smoke Detector, Price Checker, Horn Cum Strobe Lights

Ionization Detector

4 Wire Ionization Smoke Detectors, CP 355 A Addressable Monitor Module