Kaplan Turbine Test Rig Dealers

• Brand Name: Arban Industries

We offer Kaplan Turbine Test Rig. This is a reaction turbine and this test rig shows the construction and working of Francis turbine. Rope brake dynamometer is used to measure the output of turbine. Pressure gauge and orifice meter are used to measure the input of turbine. Specifications: This Francis Turbine Test Rig 150mm size to develop 2 HP at 1250 RPM with a flow o( about 1400 Ipm at 15 meters supply head Supply pump set lOO x lOOmm size, 1500 Ipm at 15 meter head suitable for supplying water to the above turbine. Monoblock Centrifugal Pump : (5 HP, 3 Phases, 440V) Pump Size : Suction size 100mm & Delivery size 100mm Pump Discharge : 2500 LPM Delivery Head : 7 meter RPM : 3000RPM Sump Tank : Fiber glass lined MS Tank to store sufficient water for independent circulation through the unit experimentation and arrange within the floor space of main unit. Capacity 950 ltr. Rope Bake Dynamometer is used to measure the output. Spring balance and dead weights are used to measure the load Runner suitable Diameter & orifice meter is used to measure the flow rate of water. Discharge control valve, by-pass valve of 4' (ISI mark) used to control the flow rate of water. Spring Balance arrangement. Pressure Gauge of 10 kgcm2 is used to measure the pressure head. Rigid MS frame work compactly fitted with all the above items as a self-sufficient Package unit suitable for operation without any foundation. Switch and starter suitable for above motor pump set mounted on the control panel board. Experimental Capabilities: To determine the efficiency of Turbine To draw the characteristics curve of Turbine.

KAPLAN TURBINE IS AN AXIAL FLOW REACTION TURBINE NAMED IN THE HONOUR OF DR. B KAPLAN AN GERMAN ENGINEER. THIS TURBINE IS SUITABLE FOR LOW HEAD

As a reliable name, we ensure that payment procedures remain secured with us. For this, we issue invoice to the customers stating the products, quantities and agreed prices. Packaging of our products is accomplished by following stringent quality standards. We have hired a team of professionals who make sure that the entire lot is intricately packed and reaches the destination in the best state.

• Weight: 100-400kg
• Voltage: 110V
• Application: Industrial Use
• Power: 1-3kw
• Automation Grade: Automatic
• Capacity: 2 HP (Closed circuit)

We make sure that there will be no damage to the products that we deliver to the customers. For this, we use high quality packaging material and hi-tech machines ensuring the same. To make our transactions secure, we allow our clients to make payment through both offline and online mediums. Specifications : This Francis Turbine Test Rig 100mm size to develop 2 HP at 1250 RPM with a flow o( about 1400 Ipm at 15 meters supply head Supply pump set lOOxlOOmm size, 1500 Ipm at 15 meter head suitable for supplying water to the above turbine. Monoblock Centrifugal Pump - (7.5 HP, 3 Phases, 440V) Pump Size - Suction size 100mm & Delivery size 100mm Pump Discharge - 2500 LPM Delivery Head - 7 meter RPM - 3000 RPM Sump Tank : MS Tank to store sufficient water for independent circulation through the unit experimentation and arrange within the floor space of main unit. Capacity 650 ltr. Rope Bake Dynamometer is used to measure the output. Spring balance and dead weights are used to measure the load Runner Diameter 220mm. Discharge control valve used to control the flow rate of water. Spring Balance 6 Kg (Salter Make) Pressure Gauge of 4.2 kg/cm2 is used to measure the pressure head. Rigid MS frame work compactly fitted with all the above items as a self-sufficient Package unit suitable for operation without any foundation. Switch and starter suitable for above motor pump set mounted on the control panel board. Experimental Capabilities : To determine the efficiency of Turbine To draw the characteristics curve of Turbine.

• Country of Origin: Made In India
• Voltage: 230 V
• Usage/Application: Industrial and Technical Training
• Surface Treatment: Powder Coating
• Material: Mild Steel
• Phase: Single Phase
• Automation Grade: Automatic
• Power: 3.7 kW

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Closed Circuit Kaplan Turbine Test Rig. Type : Axial Flow Reaction Turbine Capacity : 5 HP Rated Speed : 1500RPM Discharge Capacity : 4500 LitersMinute Supply Head : 7 Meters Guide Vanes : Gun Metal Vanes (Aerofoil Blade Shaped) B. Loading :Rope Brake Material :Cast Iron Drum Size :300 mm diameter C. Supply Pump Set Size : 10 X 10 Discharge : 5000 LitersMinute Total Head : 8 Meters Motor Capacity : 20 HP Starter for Motor : Star Delta Crompton Make D. Flow Measurement Material : C.I Body Manometer Fluid : Mercury E. Pressure Measurement Pressure & Vacuum gauge F. RPM Indicator : Digital G. Sump Tank: Material of Constructio : MS Powder Coating M.S. FRP LiningS.S Unit Service Required : Electrical supply-7.5 HP, 3Phase, 440 Volts, 50HZ AC Supply

• Country of Origin: India
• Brand Name: UMI

- KAPLAN TURBINE TEST RIG - For Educational Training

• Usage: Laboratory
• Brand: ETHER
• Test Rig Type: Turbine Test Rig

Semi Circular Sectioned hollow ship model, provision for loading as Cargo and warship, fine arrangement for accurate angle measurement extra weight in Metric Unit for tilting coupled.   Product Code : SAMS HYD - 008

• Brand: Eletech- Eletech Lab Instruments
• Model No: ELI-1903
• Speed Range: 2000rpm
• Diameter of turbine: 52mm
• Water tank Cap: 120L
• Pressure: 0-100PSI
• Power Requirement: 440V AC
• Category: Civil Lab
• Tag: Kaplan Turbine Test Rig

A Pressure gauge and Vacuum Gauge for head measurement. Rope brake arrangement by two circular balance methods. 300mm dia. cast iron water-cooled brake drum mounted on the main shall with bearings for load test. The head of the turbine is 5 to 8 meters and discharge about 1500 LPM. 1HP/5 HP pump set suitable for supplying water to the above turbine and for operation on 400 Volts 3 phase 50 cycles AC mains. TPIC Switch and DOL, starter for the Pump set. Flow measuring unit, consisting of 150mm Orifice meter and pressure gauge. Piping system consisting of pipes, valves, and fittings complete set suitable for the test rig. Fiber glass lined MS. Powder coated Sump tank to store sufficient water for independent circulation through the unit for experimentation and arranged within the floor space of the main unit. M. S. powder coated framework compactly lilted with all the above items as a self-sufficient package unit suitable for operation without any foundation.

Kaplan Turbine is an axial flow reaction turbine named in honour of Dr. B. Kaplan, a Gennan Engineer. This turbine is suitable for low head. The power produced by a turbine is proportional to QH. As the head (H) decreases the J discharge (Q) must increase to produce the same power. The present set-up consists of a scroll casing housing a runner. Water enters the turbine through the stationary guide vanes and passes through the runner axially. The runner has a hub and airfoil vanes, which are mounted on it. The water is fed to the turbine by means of Centrifugal Pump. The runner is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement. A transparent hollow cylinder made of acrylic is fitted in between the draft tube and the casing for observation of flow. Load is applied to the turbine with the help of rope brake arrangement so that the efficiency of the turbine can be calculated. The set-up is supplied with control panel. A draft tube is fitted on the outlet of the turbine. The set-up is complete with guide mechanism. Pressure and Vacuum gauges are fitted at the inlet and outlet of the turbine to measure the total supply head on the turbine Experiments To study the operation of Kaplan turbine. To determine the Output Power of Kaplan Turbine. To determine the turbine efficiency Utilities Required Water Supply and Drain Electricity 1.5 kW, 440V AC, Three Phase Floor Area 1.5 x 0.75 m

• Usage/Application: Industry
• Country of Origin: Made in India
• Material: Mild Steel
• Automation Grade: Automatic
• Color: Blue

KAPLAN TURBINE TEST RIG       Kaplan turbine 150 m.m.size to develop 1 kw. at 1000 R.P.M.1500 L.P.M. at 5 to 8 m. head, complete with rope brake arrangement with spring balances. Orificemeter & pressure gauges provided to measure flow rate, for conducting experiments in Metric units.    

• Fuild mechanics and machinary equipment: Francis Turbine Test Rig
• Fuild mechanics and machinary equipment: Centrifugal Pump Test Rig
• Fuild mechanics and machinary equipment: Hydraulic Ram Test Rig
• Fuild mechanics and machinary equipment: Submersible Pump Test Rig

Product description:our organization is regarded among the authentic manufacturers and exporters of optimum quality kaplan turbine test rig. Highly acknowledged for its corrosion resistance, shock proof body construction and hassle-free operation, offered equipment is extensively demanded among our huge client base. description: â�¢ kaplan turbine is an axial flow reaction turbine named in honour of dr. B. Kaplan, a german engineer. Â�¢ this turbine is suitable for low head. The power produced by a turbine is proportional to qh. As the head (h) decreases the discharge (q) must increase to produce the same power. Â�¢ the present set-up consists of a scroll casing housing a runner. Â�¢ water enters the turbine through the stationary guide vanes and passes through the runner axially. Â�¢ the runner has a hub and airfoil vanes,which are mounted on it . The water is fed to the turbine by means of centrifugal pump. Â�¢ the runner is directly mounted on one end of a central shaft and other end is connected to a brake arrangement. Â�¢ a transparent hollow cylinder made of acrylic is fitted in between the draught tube and the casing for observation of flow on to the airfoil vanes. Â�¢ this runner assembly is supported by thick cast iron pedestal. Load is applied to the turbine with the help of drum brake arrangement so that the efficiency of the turbine can be calculated. Â�¢ the set-up is supplied with control panel. Â�¢ pressure and vacuum gauges are fitted at the inlet and outlet of the turbine to measure the total supply head on the turbine.

• Brand Name: TAGLab

We are offering kaplan turbine test rig. Latest model kaplan turbine transparent outlet pedestal with stainless steel draft tube cast iron external bearing pedestal for longer bearing life base frame arrangement & chrome plated, slotted weights with spring balance rigid m.s. Frame work compactly fitted self sufficient package unit suitable for operation without any foundation.

Kaplan Turbine Test Rig (1 KW capacity 5HP Supply Pump) a) Test rig consists of a Kaplan turbine designed for laboratory experimental purposes and to conduct test in metric units. The specifications of the turbine are as follows: Normal Speed - 2200 RPM. Capacity-1.0 KW. The unit consists of a cast iron casing, a rotor assembly of shaft, an axial flow gunmetal runner and a brake drum all mounted on a suitable sturdy base. The runner has vanes of aerofoil section. Fixed guide vanes are provided in the turbine to regulate the flow into the runner. A conical draught tube is connected to the turbine outlet by a bend. For observing the flow at the runner exit a transparent window made of thick perspex tube is provided in between the turbine casing and the draft bend. A rope brake arrangement with a set of dead weights and spring balance is provided for loading the turbine. Pressure gauge and vacuum gauge are fixed at the inlet and outlet to measure the net supply head to the turbine. b) Water to the turbine is provided by a centrifugal pump set of 5HP capacity. The pump operates on 440Volts, 3 Phase, 50 Hz line. c) Other standard accessories include a DOL starter, switch, flow control valve, suitable piping. d) Flow measuring unit consists of a venturimeter with pressure taps connected to two pressure gauges mounted on a panel board. e) The complete test rig is mounted on a storage tank of suitable capacity. The tank is provided with FRP lining for total rust protection.

The present set-up consists of a scroll casing housing a runner. Water enters the turbine through the stationary guide vanes and passes through the runner axially. The runner has a hub and airfoil vanes, which are mounted on it. The water is fed to the turbine by means of Centrifugal Pump. The runner is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement. A transparent hollow cylinder made of acrylic is fitted in between the draft tube and the casing for observation of flow. Load is applied to the turbine with the help of rope brake arrangement so that the efficiency of the turbine can be calculated. The set-up is supplied with control panel. A draft tube is fitted on the outlet of the turbine. The set-up is complete with guide mechanism. Pressure and Vacuum gauges are fitted at the inlet and outlet of the turbine to measure the total supply head on the turbine.

Owing to the expertise gained over the years, we have put ourselves in the top bracket of industry. We as a Manufacturer, Exporter and Supplier of Kaplan Turbine Test Rig strive to provide you a flawless experience. Kaplan Turbine Test Rig is manufactured under strict supervision to ensure the compliance to the standards of quality set by industry. We also employ a team of quality auditors to run quality checks to ensure our level of quality does not plummet.