Leeb Hardness Tester Dealers

Leeb Hardness Tester NOVOTEST T-D2Leeb Hardness Tester NOVOTEST T-D2 is designed for rapid non-destructive hardness testing of various objects.Leeb Hardness Tester NOVOTEST T-D2 uses dynamic method of hardness testing – Leeb method, standardized according to ASTM A596.Leeb probe is used for measuring the hardness of non-ferrous metals, cast iron, materials with coarse-grained structure, solid products, etc.Key features: Hardness testing of standard steels and alloyed steels Hardness testing of cast iron and nonferrous metals Testing of tensile strength of carbonized steels products of pearlite class for tension Implementation of the rebound method (Leeb) Allows user to test the products with weight more than 5 kg and thickness more than 10mm without any additional actions Restrictions about the using of Leeb Hardness Tester NOVOTEST T-D2If user need test items which are weighing less than 5 kg or thinner than 10 mm, he has to lap tightly the tested product to a surface of the base plate which are weighing more than 5 kg.  Advantages Wide range of hardness measurement Allows to test the products with coarse, non-uniform structure (castings, forgings) Very ease and simplicity in setup and operation Reasonable price (lower in comparison with the ultrasonic hardness tester) User can save the results of hardness measurements into the internal memory of the device and after that, transfer them to the PC. Device allows user to operate in a wide range of the temperature. Hardness tester T-D2 has a brightness high contrast display. Device also has calibration modes for hardness testing of wide range of metals and alloys.

• Temperature Capacity: 360 Degree
• Usage: Leeb Hardness Measurement
• Model Number: LM100
• Communication: USB Hardness
• Scale: HL ,HB , HRB, HRC , HV , HS, strength
• Size: 153mm*76mm*37mm (H*W*D)
• Weight: 280G
• Printer: Thermal Printer with blue tooth (optional)
• Impact Device Type: D/C/G//DL/DC

Features: The classic tester, with high reliability Measuring accurately and easy operation Switch freely between 6 hardness scales Standard sheath to prevent shaking The most affordable price with the best quality Switch the harness scale in any mode, don’t need to be set in advance Standard LmView communication software Wireless Bluetooth printer connection   Application:  Portable Leeb Hardness testers are suited for testing the hardness of very thin parts like sheet metal, thin walled or very light weight parts. It is widely used in manufacturing, metal processing industry, chemical industry, industry inspection and other testing fields.

• Type: MI-970 METRIX + LEEB HARDNESS TESTER
• Model Number: MI-970
• Brand Name: Metrix
• Type: LEEB HARDNESS TESTER
• MI-970 METRIX + LEEB HARDNESS TESTER: 36800

Product description: leeb hardness tester be the first to review this product hardmaster: +-0.8% at ld=900, 200-900hld 130: +-10hld, 170-960hld mi 970: +-0.8% at ld=970, 170-970hld the leeb rebound hardness test is one of the four most used methods for testing metal hardness. This portable method is mainly used for testing sufficiently large workpieces (mainly above 1 kg)

• Display Type: Segment LCD
• Hardness Scale: HL, HB, HRB, HRC, HRA, HV, HS
• Measuring Range: 170-960)HLD, (17-68.5)HRC, (19-651)HB, (80-976)HV, (30-100)HS, (59 - 85)HRA, (13-100)HRB
• Data Memory: Max. 500 Groups
• Working Voltage: 3V?2 AA size alkaline battery
• Continuous Working Period: About 100 Hours (With backlight off)
• Communication Interface: RS232
• Measuring direction: 360°

Features: Compact plastic case, suitable for use under poor working conditions. Test at any angle, even upside down. Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL. Large screen (segment LCD), showing all functions and parameters. With EL background light. Large capacity memory could store 100 groups information. Data pro Software to connect with PC via RS232 port. Micro printer support Software calibration function. 

• Brand Name: Accuplus
• Hardness Scale: HRB,HRC,HV,HB,HS,HL
• Display Type: Digital
• HRB,HRC,HV,HB,HS,HL: 1 Year warranty Against Mfg. Defects
• Test Range: (170-960)HLD,(17-68.5)HRC,(19-651)HB,(80-976)HV,(30-100)HS,(59- 85)HRA,(13-100)HRB
• Model Name: TH270A

Features:  Compact plastic case suitable for use under poor working conditions. Test at any angle, even upside down.  Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL  Large screen (segment LCD), showing all functions and parameters. With EL background light.  Large capacity memory could store 100 groups information.  Datapro Software to connect with PC via RS232 port. Micro printer support  Software calibration function.Die cavity of moulds  Bearings and other parts  Failure analysis of pressure vessel, steam generator and other equipment  Heavy work piece  The installed machinery and permanently assembled parts.  Testing surface of a small hollow space  Material identification in the warehouse of metallic materials  Rapid testing in large range and multi-measuring areas for large-scale work piece

• Display Type: Digital
• Accuracy: +/- 4 HLD
• Model Name/Number: Tkm 359
• Automation Grade: Automatic
• Calibration error with the first rate test blocks Rockwell: 1.5 HRC
• Brinell: 10 HB
• Vickers: 12 HV
• Spot diameter on the item surface for probe positioning: 7 mm
• Quantity of additional scales: 3
• Duration of one measurement: 2 seconds
• PC Connection: USB
• Power Supply: LI-ion accumulator
• Dimensions of hardness tester electronic unit: 121*69*41 mm
• Weight of electronic unit: 0.3 kg
• Weight of D Probe: 0.15 kg
• Operating temperature range: -15
• Guarantee period: 2 years

• Brand Name: VAISESHIKA
• Name: Portable Leeb Hardness Tester

 specification:   product name     portable leeb hardness tester  model  7005 c  measuring range  (170-960)hld,(17-68.5)hrc,(19-651)hb,(80-976)hv, (30-100)hs,(59-85)hra(13 -100)hrb  measuring direction  0~360°  memory  500 groups test maximum  printer  optional printer  hardness scale  hl、hbw、hrb、hrc、hra、hv、hs  shell material  plastic  data-output  rs-232  indicating error  hld：±5hrc：±1 hb：±4  language  option chinese, english, german, portuguese, turkish  statistics  average value, min-max ,upper-lower limits  impact device  d (standard)  optional impact devices  dc/d+15/dl/g/c/e  work piece radius (convex/concave)  rmin=50mm(with support ring rmin=10mm)  min. Workpiece weight  2~5kg on stable support 0.05~2kg with  compact coupling except c and g impact device  workpiece min. Thickness couple  d:5mm, g:10mm,c:1mm  workpiece min. Case hardened depth  d:0.08mm c: 0.2mm g:1.2mm  power supply  aa/3v  operating temperature  0~40°c  dimension  148mm×72mm×30mm  weight  220g (excluding impact device and printer)

• Features: Large full color graphic display with bright backlighting, Calibration of any scale in any range, Convenience and ease of measurement, Optimized number of buttons
• Extended temperature range: frost, down to – 40oC

• Accuracy: ± 4HLD (760±30HLD) error of displayed value,4HLD (760 }30HLD) repeatability of displayed value
• Memory: 48600 groups impact times: 32 1

LCD display of 128×64 matrix with back-light, showing all functions and parameters. Converts to all common hardness scales (HV,HB,HRC,HRB,HRA,HS). Material of “cast steel” is added; HB values can be read out directly when DDC impact device is used to measure “cast steel” work piece. Printer be separated from main unit and copies of testing results can be printed as required.

The device operates with both UCI (Ultrasonic Contact Impedance) and Leeb (dynamic) probes. User get the benefits of two methods of measurement – it is the maximum that can be obtained from portable hardness tester.   UCI method for the hardness testing: The ultrasonic contact impedance (UCI) probe is used for measuring the hardness of small items, objects with a thin wall, complex form, and to measure the hardness of surface hardened layers.   Leeb method for the hardness testing: Leeb probe is used for measuring the hardness of non-ferrous metals, cast iron, coarse-grained materials, massive products etc.   Hardness tester allows user to measure the hardness at extremely low temperatures. The real tests has been carried out at a temperature of 25°C below zero. The device is operated very easy, the measurement accuracy did not exceed the value according to standards, keyboard and display of the device allowed user to operate confidently – the difference between the operating at the indoor temperature and operating at the extreme cold was not noticeable at all!   We have the CE certificate of conformity for Portable Combined Hardness Tester NOVOTEST T-UD3.   Advantages Small imprint after measuring (mirror surfaces of shafts necks, blades, gear teeth, etc.) Measuring the hardness of the surface hardened layer Wide range of hardness testing Various measurement modes 88 combinations of materials and hardness scales (calibrations) Calibration of any scale in any range Convenience and ease of measurement Optimized number of buttons Large full color graphic display with bright backlighting Photofixing of measuring samples Automatic recognition of probe Indication of the type of connected probe Calibrations stored in memory of UCI probe Extended temperature range (frost, down to – 40°C) Internal memory and communication with PC New intuitive menu with tips on the buttons Optional wireless mini printer Water resistant case Rubber bumper protected case Internal clock Measure hardness value of any mass products with a thickness more than 1 mm (small parts, thin-walled structures, pipes, tanks, steel sheets, articles of complex shape, hardness testing of metal coatings, etc.)   Specifications: UCI probe types - 1kgf (10N) 2.2 lbf, 5kgf (50N) 11lbf, 10kgf (98N) 22lbf Leeb probe types - D, DC, DL, C, D+15, E, G Measuring range - HV:230~940; HRC:20~70; HB:90~650. Tensile strength, MPa 370~1740 Measuring accuracy - HV:±3%HV; HRC:±1.5%HRC; HB:±3%HB Indenter - Diamond indenter (UCI), Hardened ball (Leeb) Measuring direction Any direction 360° Data storage - Limited only by the memory card Hardness scale - RC, HB, HV, HRB, HS, HL, MPa Indication - Color LCD display (320×240) Operating environment Temperature:-20°C~40°C; Humidity - 30%~80%R.H. Power supply DC 4,5V (3 pcs batteries AA) Instrument dimensions 160x75x30mm Battery life Approx. 10 hours   Additional Information: Item Code - T-UD3 Approx. Rs 1.75 Lakh / Piece(s) Combined Hardness Tester NOVOTEST T-UD3

• Hardness Scale: HL,HB, HRB, HRC, HRA, HV, HS
• Measuring range: (170
• Measuring direction: 360°
• Display dot matrix LCD: 128×64 dots
• Data memoir: 500 groups max (Relative to impact times 32
• Battery pack: 6V NI-MH
• Battery charger: 9V/500mA
• Communication interface: USB1.1
• Outline dimensions: 212mm×80mm×32mm

India Tools & Instruments Co. is among the leading Leeb Hardness Tester PHT-200 - P Manufacturers Exporters and Suppliers based in Mumbai, India, and known for their unique and modified designs. Leeb Hardness Tester PHT-200 - P is the widely used method to test the hardness of the metal. It is mainly used to test sufficiently heavy work pieces. The main aim of this product is to analyze the pressure of the Vessel, Steam Generator etc.   This is a portable product and can be used easily to delivers the accurate results. We offer a wide range of industrial products at a very affordable cost. We make sure to deliver the best quality to maintain a long life relation with our customers. Being the most excellent Leeb Hardness Tester PHT-200 - P Manufacturers, Suppliers, and Exporters, we offers customized product range to our customers.   We make it easy for our customers to use our Hardness Tester; you can also get after sale customer support by our experts. We are here to help you out, send us your query and we will get back to you soon.   FEATURES OF LEEB HARDNESS TESTER PHT-200 Good measuring range and direction Battery pack and charger Portable and easy installation High-quality affordable price Automatic function to power off that saves the battery life   MAIN APPLICATION : Die cavity of molds Bearings and other parts Failure analysis of pressure vessel,steam generator and other equipment Heavy work piece The installed machinery and permanently assembled parts Testing surface of a small hollow space Material identification in the warehouse of metallic materials Rapid testing in large range and multimeasuring areas for large-scale work piece Large screen(128×64 dot matrix LCD), showing all functions and parameters. Test at any angle, even upside down. Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC,HV, HB, HS, HL and three types of strength values immediately. Seven impact devices are available for special application. Automatically identify the type of impact devices. Large capacity memory could store 500 groups (Relative to average times32～1 ) information including single measured value,mean value, testing data, impact direction, impact times, material and hardness scale etc. Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit. Battery information indicates the rest capacity of the battery and the charge status. User calibration function. USB port with the PC humanity multi-functions data proceeding software. Original imported high speed thermal printer support the immediate printing function. It can save data permanently. NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing). Auto power off to save energy.

• Size: 125 x 67 x 30mm
• Weight: 380 g (with batteries
• Working temperature: 10°C to +40°C
• Relative humidity: 10°C to +40°C
• Power supply: 2 x 1,5 Volt-AA-batteries
• Auto Power Off: After 5 minutes
• Battery capacity: 100 hours (without backlight)
• Backlight: ON / OFF key
• Display: 128 × 64 Dot-Matrix-LCD

• Parameter: HRC, HRB, HV, HB, HS, HL
• Display Type: Digital
• Brand Name: Accuplus
• Warranty: 1 Year
• Power: 4 kW
• Model Name/Number: FSL-270
• Automation Grade: Automatic
• Weight: 100-300 g

Portable leeb hardness tester 7005 lht is light weight, hand held and portable instrument which can be taken for onsite in-situ testing of hardness of various types of metals and metal alloys. Above all, the leeb hardness tester can measure hardness in the units of leeb, brinell, rockwell, vicker and shore units. The instrument provides the facility of a selector switch to select the desirable unit of measurement of hardness

Leeb Hardness Tester, UCI Hardness Tester, crack depth meter

Leeb Hardness Tester, Ultrasonic Pulse Velocity Test, Spectrometer

LEEB Portable Hardness Tester, Torque Analyzer