Length Counter Dealers

• Type: Length Counter
• Application: Length Reading
• Feature: Durable, High Accuracy, Light Weight, Low Power Consumption, Stable Performance
• Voltage: 110V, 220V
• Display Type: Digital
• Power Source: Battery, Electric
• Power Supply: 230VAC
• Country of Origin: India
• Brand Name: ELECTROCOM
• Size: 96*96*110
• Power: 230VAC
• Name: LENGTH METER , METERAGE CONTROLLER , PRODUCTION COUNTER

• Input : PNP / NPN Proximity sensor, Potential free contact Encoder
• Display : individual display for Length & set-point 4 / 6 digit LED Display
• Power Supply : 230 / 110 VAC , 24 VDC
• Accuracy : Better than + 0.01% Of F.S. for encoder i/p
• Alarm : maximum 3 Nos.
• Interface : RS 485 / MODBUS RTU / ASCII (optional)
• Mounting : Panel

Bi-Directional Length Counter ( Length Controller )Features : • Micro controller Based & Fully programmable• Auto Reset for set point• Hold time programmable for 2 relays• Password protected programmable scale factor• Logic as per system requirement

• Material: Stainless Steel
• Usage/Application: Apartments
• Wire Diameter: 3 mm
• Size: Any
• Surface Finish: Nylon Coated
• Wire Spacing: 316 l grade
• Material Grade: 316
• Color: Silver

Invisible grill used in balcony and staircase area.

• Power Supply: 230 V AC
• Size: 48 X 96 X 110 mm

Manual Reset Mode : When preset count is reached the relay status is changed. Counting stops at the preset value. To start the counting from zero, press switch 'E' on the front panel. The counter resets to '000000' and starts counting. Here resetting is done manually. 2. Auto Reset Mode: When preset count isreached the relay status is changed. Counter will reset automatically after a specific preset time & counter resets to '000000' & starts counting. Resetting is automatic The time for which relay should remain unchanged is settable. 3. Selection of Counting ONOFF: This is applicable to Auto Reset mode only. This is to select whether counting should be ON or OFF during the output relay ON period. This means counting for next cycle can be started a) Immediately after Preset value is reached or, b) After a time period for which Relay is ON

• Brand Name: Electronic Switches
• Model Name/Number: SF 62
• Dimensions: 48 X 96 X 110 mm
• Supply: 230 V AC
• Sensor Supply: In-built 12 V DC regulated supply
• Measurement Accuracy: + / - 1 Digit
• LED Display: 19 mm red colour Readout 6 digits
• Memory Backup: provided Eeprom memory for 10 years
• Cut Out Size: 46.5 X 92 mm

• Country of Origin: Made in India
• Model Name/Number: lc1046
• Color: Black
• Brand: Multispan
• Usage/Application: Industrial
• Material: PVC
• Current Input: 5A

• Type: Length Measuring Machine
• Certification: ISO 9001:2008 Certified
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V
• Condition: New, Used
• Automatic Grade: Automatic, Manual, Semi Automatic
• Warranty: 1year, 2years, 5years

Keeping in mind the precise demands of clients, we offer a qualitative range of Preset Length Counter. DIY Supplies: Electrical Model Number: FH8-6CRNB Counting Speed: 305000CPS Operating Temperature: 0-50°C Item Size: 9.5 * 4.7 * 8.5cm 3.7 * 1.8 * 3.3in Auxiliary Power: 24V DC

Salient Features 6 digit length/total count& 4 digit line speed/batch count Diameter entry possible Preset entry output Choice of NPN/PNP proximity Microprocessor based technology with Nonvolatile memory`

CMC 5 Measurement-in meters & tenth of meter with two wheels of 12 meter with two wheels of 12 meter circumference, bracket & stopper suitable for 12.7 mm rod. CMC 6 Measurement-in meters and tenth of meter with two wheels of 12 meter circumference. it comes without bracket

• Display:  (Upper) Red 6-digit, 0.4”   (Lower) Green, 4-digit,
•   Setting:  Front Keypad.
•   Counting Input:  NPN / PNP Proximity Switch / Micro Switch /  230v Ac Pulse
•   Power Supply:  230v Ac, ±20%, 50Hz.
•   Memory:  Non Volatile Memory.
•   Set Point:  Single Set Point / Double Set Point  (optional).
•   Output:  230v Ac ,5Amp.(1c /o+buzzer Or 2c /o)
•   Indication:  Led To Indicate Relay Status.
•   Reset:   Auto / Manual Reset Facility.
•   Size (H x W x D):  96 x 96 x 65, 72 x 72 x 110. (mm)
•   Cutout (H x W):  92 x 92, 68 x 68. (mm)

We offer Length Counters.

• Operating temperature: » 0° to 50° C
• Weight: » approximately 580 gms
• Supply: » 230 V AC (+/- 10%)

Length counter provides a very cost - effective and reliable solution to many complex counting requirement. » Potential free contacts from limit switch, micro switch.

• Size: (72 x 72x 74) mm, Refer Size (2) table.
• Input Speed: 200 or more counts per second.

: In this, when actual counts reach to the preset counts, relay change the contact position for preset time 000.1 to 999.9 sec and display will automatically reset to zero, & start new cycle of counting

• Voltage: 230V AC
• Model Number: LC1046D
• Brand Name: Multispan
• MPM Range: 999.9 MPM
• Dimensions: 96x96x42 mm
• Panel Cutout: 92x92 mm

• Display Type: 7 Segment LED Dual Display
• Model Number: RBC-9664
• Brand Name: Radiant
• Input Type: Proximity PNP/NPN
• Output Type: 1 Relay @ 7 Amp.
• Display Configuration: 6 Digit For Total Count (0.56
• Sensor Type: NPN,PNP,Potential Free Contacts

• Brand Name: Electronic Switches
• Model Name/Number: SF 62
• Dimensions: 48 X 96 X 110 mm
• Supply: 230 V AC
• Sensor Supply: In-built 12 V DC regulated supply
• Measurement Accuracy: + / - 1 Digit
• LED Display: 19 mm red colour Readout 6 digits
• Memory Backup: provided Eeprom memory for 10 years
• Cut Out Size: 46.5 X 92 mm

• Power Source: Electric
• Voltage: 230 VAC
• Model Name/Number: LC-1046D
• Brand: Multispan
• Usage/Application: Industrial
• Material: Aluminum
• Current Input: 5A
• Dimensions: 96 x 96 x 42 mm (H x W x D)
• Display: Digital
• Packaging Type: Box
• Frequency: 50 Hz