Level Monitors Dealers

• Brand Name: Technofriends
• Warranty: 1

Wire less Water Level Monitoring Graphical Display Remote Monitoring LCD Monitor Display Real -Time monitoring mobile Monitoring Multiple Tank Level Display on a single monitor Level Monitoring from anywhere

• Voltage: 200VDC, 230VAC
• Frequency: 50HZ, 60Hz
• Power: 0-5Amp, 10-15Amp
• Temperature: 0Dig C To + 60Dig C
• Hole Diameter: 0-20mm, 20-40mm
• Setting Range: 0-1500pF, 1500-3000pF

We are listed among the prime Electronic Water Level Monitor Manufacturers and Suppliers from Hyderabad, Andhra Pradesh. The Electronic Water Level Monitor offered by us, is widely used for automatic and Hands free pumping operations. Widely used to regulate and control fluctuating voltage and keep your motor safe, our Electronic Water Level Monitor has been termed as the best available Pumping Accessory available in the market. Specialty Controls motor against fluctuating voltage Avoids any damage to pump or motor Ensure water availability round the clock Energy efficient in nature Widely used in Petrochemical industries Water storage tanks Paints industry Plumbing industry

These are suitable for conductive liquids like water and for non-conductive liquids like DieselOil. Models for either one level monitoring or two level monitoring. FEATURES Can be used for potable water, water with impurities and for dieseloil Cable size & length no restriction for water level monitoring Suitable for variety of electrodes Optical sensing for dieseloil level monitoring Open collector output (for FRKP4) Choice of enclosures (DIN-Rail, & Plug-in) Use of SMD Technology (S2 Series models)

The Model 4675LV is a water level monitoring system that uses a vibrating wire force transducer to provide a highly stable and sensitive means of monitoring water levels. The main component is a cylindrical weight suspended from the force transducer. The cylinder hangs partially submerged in the water whose level is to be monitored. As the water level changes, the changing buoyancy force on the cylinder acts directly on the vibrating wire transducer and alters its tension, and hence its resonant frequency.

Designed with simplicity in mind, the Amazon bubbler is the ideal system for long-term, water level monitoring sites. It can be used as a stand-alone system with internal data storage, or as a sensor connected to any manufacturers data logger. Easily configure and collect data using the browser-based graphical user interface with all standard web browsers on PCs, tablets and smart phones. It's rugged build, and technologically advanced system makes the Amazon Bubbler an attractive solution for real-time monitoring and data collection.   The Amazon provides a continuous air bubble and an integrated pressure sensor that measures the pressure required to push the bubble out of the orifice line, which is the line pressure. The line pressure value measured in psi is then converted into the desired units of measurement to represent water level. The Amazon can be used as a stand-alone unit or sensor with a full suite of communication protocols including SDI-12, MODBUS via RS-485 or TCP, and 4-20mA. The Amazon requires no special software and is easily configured with an optional display and or web browser GUI. YSI's water level team of professionals have been providing bubbler support for over 20 years. Key features unique to the Amazon Bubbler System: Stand Alone System - The Amazon can be used as a sensor connected to other recorder devises; data logger, PLC, RTU, etc. However, at a substantial cost savings, it can also be used as a stand-alone device, eliminating the need of an external recording device. Data values recorded by the Amazon can be copied directly to a USB Flash Drive and imported to the PC. Browser Based Software - The Amazon's initiative, easy to use software is browser based, which eliminates the need for proprietary software being installed on the PC. Access the Amazon software from any internet device that has Wi-Fi or USB connection functionality. Key Pad Display - As an optional interface, the Amazon uses a Sharp® Memory LCD display. This provides the convenience of continuous display of data with the cost savings of low power usage. The display is provided as an option to the Amazon. For applications where an external display is not required, the Amazon can be purchased without the display. Communication - Multiple communication options are available to insure that the Amazon can interface with any data logger, PLC, or RTU. These options include; SDI-12, MODBUS (over IP or RS-485), and 4 to 20 mA. Via the Ethernet port, the Amazon can push data over the internet directly to Storm Central, our data hosting solution. Measurement Range - Three range options are available to provide the highest measurement accuracy. With an industry leading accuracy of 0.02% of Full Scale; the 0 to 10 m range provides an accuracy of ±2 mm, the 0 to 20 m range has an accuracy of ±4.25 mm, and the 0 to 35 m range has an accuracy of ±7 mm.

• Country of Origin: Made in India
• Material: MS,SS 304,SS 316,PP,PVDF
• Item Code: TLG-15
• Construction: C- Channel,Tie Road
• Glass Material and Size: Borosilicate tube in OD of 12,16,19 and 25mm
• Maximum Pressure And Temp: 10 Kg/cm2 and 100 Deg C
• Wetted Part Material: CS,ASTM A 105,SS 304,SS 316L
• Model Name/Number: TLG-15
• Usage/Application: Industrial
• Brand: PETROTECH

The Model 135 is an advanced liquid helium level monitor which incorporates AMI's patented sample-and-hold design with automatic helium level sensor vacuum burnout protection. The Model 135 is ideal for operation in systems where it is important to monitor the liquid helium level while also minimizing the helium losses. Microprocessor-based electronics provide 0.1% readout accuracy. Nonvolatile, read only memory maintains instrument calibration without battery backup. Watchdog timer circuitry and low line voltage (brownout) detector prevent microprocessor lock-up and provide fail-safe operation. High and low alarm functions The Model 135 adds "High" and "Low" alarm setpoints which activate front panel LED warning indicators and rear panel relay outputs in the event of an overfill or liquid loss condition. The alarms also energize an audible warning which can be silenced from the front panel. "High" and "Low" setpoints are programmable from 0 to 100 percent of sensor active length. Minimal liquid helium losses In order to minimize liquid helium loss, the Model 135 automatically energizes the liquid helium level sensor at user programmable time intervals and monitors the normal (resistive) zone as it progresses from the top of the sensor toward the liquid surface. As soon as the normal zone reaches the liquid surface, the level reading is saved and the current in the sensor is turned off until the next sample interval occurs. An LED sensor current indicator is illuminated during each sample. Sample intervals are user programmable from the front panel and can be set between "0.0" (continuous reading) to "600.0" minutes or hours. A manual update switch provided on the front panel can also be set to obtain continuous readings during a helium transfer period or to manually force an immediate measurement. Sensor burnout protection The Model 135 provides automatic helium level sensor vacuum burnout protection. A liquid helium level sensor energized in a vacuum environment will self-heat to the point of burnout within seconds. AMI’s innovative microprocessor-based circuitry detects incipient sensor burnout and de-energizes the sensor before damage can occur. A 5% increase in sensor resistance will trigger this protection, causing the current to be switched off for 6 seconds before attempting to resume normal operation. Convenient display The Model 135 is equipped with a 4 digit LED digital display which provides liquid helium level indication in inches, centimeters, or percent as selected by a front panel switch. Front panel sensor calibration allows the user to calibrate the instrument quickly and easily for any length sensor. Calibration can be performed in either inches or centimeters of sensor active length with automatic reading crossover between inches, centimeters, and percent.

In order to minimize liquid helium loss, the Model 135 automatically energizes the liquid helium level sensor at user programmable time intervals and monitors the normal (resistive) zone as it progresses from the top of the sensor toward the liquid surface. As soon as the normal zone reaches the liquid surface, the level reading is saved and the current in the sensor is turned off until the next sample interval occurs. An LED sensor current indicator is illuminated during each sample. Sample intervals are user programmable from the front panel and can be set between "0.0" (continuous reading) to "600.0" minutes or hours. A manual update switch provided on the front panel can also be set to obtain continuous readings during a helium transfer period or to manually force an immediate measurement.

• Brand Name: STE
• Type: Electric
• Voltage: 220 - 440 V
• Temperature: 50 degree C
• Phase: Single
• Usages: Laboratory
• Accuracy: +/- 0.3 %

• Country of Origin: Germany
• Sensor type: Both rod & rope type available
• Auxiliary power supply: 230V AC, 110 V AC & 24V DC models available
• Maximum rope length: 10 meters(standard max.; higher lengths on request)
• Maximum process temperature: Models suitable up to 1000 degree C available
• Self-Monitoring: Optionally available

We are offering rotary paddle level limit monitor. Rotary paddle level monitor has a small low speed, low torque synchronous motor, mounted within a protective enclosure and coupled by a shaft to a paddle, drives the paddle. The paddle rotates freely at a low speed in absence of material. When the material impedes the paddle, the rotation of the paddle is arrested and the motor housing frame moves to another limiting position within the housing and the extension-switching arm (which moves in unison with the motor housing) triggers a dry electrical contact (single pole double throw, i.e. Spdt) to perform a control functions related to material level.

dam level monitor, Wireless Nurse Calling Station System

Water Tank Level Monitoring

Water Level Monitor

River Level Monitoring

Water tank Level Monitor

liquid level monitors, Digital Programmable Thermostat