LPG Meter Dealers (38 products available)

• Color: Any
• Usage/Application: Industrial
• Gas Type: LPG
• Operating Pressure: Standard
• Brand Name: Itron
• Material: Steel
• Body: Plastic

• Color: blue
• Country of Origin: Made in India
• Warranty: 3 Year’s
• Usage/Application: Industrial
• Brand Name: INCONEL
• Material: SS
• Model Name/Number: FLUIDIC
• Available Sizes: 15mm To 250mm

• Steel: 1",2",3",1/2",1/4",4",6"
• Steel: 1",2",3",1/2",1/4",4",6"

within the working range of the meter the rotor spins proportional the actual velocity of gaseous material flowing. a pick-up sensor produces an electrical signal as each blade crosses through its low magnetic or rf field. this signal is amplified and conditioned by a transmitter or fed directly into a ratetotalizer, and represents the actual cubic feet per minute (acfm) flowing through the meter. the k-factor is stenciled on the meter body in pulses per actual cubic feet (pacf). because gases are compressible, most people desire to measure the equivalent amount of gas corrected for the line pressure and temperature to standard cubic feet per minute (scfm at 60ã�â°f, 14.69 psia). if the flow temperature and pressure are relatively constant, then a simple correction can be calculated to shift the k-factor from pacf to pscf and a simple totalizer (measurement systems india make ) may be used. when flow temperature and pressure are not constant, a flow computer. specifications linearity 1 ã�â±1.0%0.5% repeatability 1 ã�â±0.25% maximum over-range 125% of flow rate for intermittent periods frequency output 0 to 1,100 hz voltage output approximately 100 mv@ 100 hz to 1.5 v (rms)@ 1,000 hz. pressure drop 0.5 psi at 100% of flow range pressure rating we manufacture flowmeters for most pressures. installation vertical or horizontal (any direction). materials of construction body: 316 l stainless steel. flanges: 316 stainless steel rotor: 431 stainless steel. rotor shaftbearings: standard: tungsten carbide v-cup cartridge frame retainer: 302 stainless steel cartridge frame: 316 l stainless steel. temperature range:meter with bearing structure of: standard: tungsten carbide: -40ã�â°f to 300ã�â°f (-40ã�â°c to 149ã�â°c). for other temperatures consult factory.

• Brand Name: Mass Flow
• Condition: Good
• Place of Origin: Pune, Maharasthra
• Size: 10mm to 100mm
• Product Name: LPG Gas Meters

LPG Gas Meters that we offer are manufactured with the use of best quality components that impart strength and endurance. Our LPG Gas Meter provides accurate readings of the flow with an absolute ease. Our LPG Gas Meters are sophisticated and work with utmost precision.Principle of Operation LPG Gas Meter -     The operation of the International LPG Gas Meter is based on the measurement of the velocity of gas.     The flowing gas is accelerated and conditioned by the meter´s straightening section.     The straightening vanes prepare the gas flow profile by removing undesired swirl, turbulence and asymmetry before the gas flows to the turbine wheel.     The Dynamic Forces of the Flowing Fluid/Gas cause the rotor to rotate.     The turbine wheel is mounted on the main shaft, with special high precision, low friction ball bearings.     The turbine wheel has helical blades that have a known angle relative to the gas flow.     The conditioned and accelerated gas drives the turbine wheel with an angular velocity that is proportional with the gas velocity.     The rotating turbine wheel drives the index head with the eight digit mechanical counter via shafts and gears.     The volume and flow rate can also be indicated electronically. A proximity probe generates a signal at each passing blade of the turbine wheel.     With the device-specific K-factor and the number of pulses, the passed volume can be calculated. With the measured frequency the flow rate can be determined.     The rotating turbine wheel can also generate pulses directly by proximity sensors that create a pulse for each passing turbine blade.     By accumulating the pulses the total passed volume and gas flow rate can be calculated.     This is a highly accurate flow meter, approved for custody transfer measurement, equipped with electronic pulse outputs and a mechanical counter.     Working -     The LPG Gas Meter measures gas volume flowing through an annular passage in the meter.     The flowing gas volume is totalized on a local mechanical counter.     In addition, low or high frequency pulse signals are generated to infer the gas flow and volume. The indicated gas volume is the actual volume flowing through the meter at the actual temperature and pressure.     The LPG Gas Meter is available in two models.     The LPG Gas Meter is used for high accuracy and custody transfer applications.     The LPG Gas Meter is an economically priced meter with a good accuracy. Gas Types That Are Suited For LPG Gas Meter -     The LPG Gas Meter in its standard design can be used for all non-aggressive gases, such as natural gas, methane, propane, butane, city gas and fabricated gas, air, nitrogen, etc.     For aggressive gases, like sour gas, biogas and oxygen, special designs are available with Teflon coating, special lubrication or special purging. Temperature Range - The temperature ranges as standard The Gas Turbine Flow Meter is designed to operate at temperatures between -10oC to 60oC. Special low and high temperature designs are available on request.Material Used - SteelSizes Available -     10mm     15mm     20mm     32mm     40mm     50mm     65mm     80mm     100mm     125mm     150mm     200mm     250mm     300mm     400mm     500mm     600mm     800mm     1000mm

• Pressure: High Pressure
• Automation Grade: Manual
• Application: Lpg Gas Testing
• Weight: 10-20kg

• Application: GAS
• Type: RPD ROTARY GAS METER
• Brand: ITRON DRESSER
• Material: Aluminium
• Size: 50MM

commercial and industrial rpd gas meter 

• Brand Name: Riello
• Material: Brass
• Pressure: 1.6 Mpa
• Port Size: 1/2 Inch
• Thread: 1/2 NPT
• Surface: Finished

Offering an extensive array of Thermal relief valve, we are flexible enough to deliver the best in class range. Established in Lucknow(India), we are well-known name offering comprehensive range of products.

• Application: Gases
• Brand Name: Burak Metering
• Material: Stainless Steel
• Driven Type: Electric
• Power: 24 VDC, 2 AMP & 230 VAC
• Usage: Industrial, Water And Chemicals
• Packaging Type: Wooden Box
• Line Size: 4-20mm, 20-50mm, 50-100mm, 100-150mm
• Type: Thermal Mass Flow Meter
• Country of Origin: India
• Display: Digital
• Analog Output: 4-20 MA, HART
• Model No: Inline Thermal Mass Flow Meter/BT-3020-G

• Color: BLUE
• Usage/Application: Industrial
• Gas Type: LPG
• Operating Pressure: 0.5 BAR
• Brand Name: ZENNER
• Material: STEEL
• Max Flow: 25 AM3/HR
• Max Working Pressure: 0.5 BAR
• Display Type: ANALOG

A meter is used to measure the volume of fuel gases fuels such as natural gas and LPGpropane & HSD. meters are used at residential, commercial, and industrial applications that consume fuel gas supplied by a gas utility. Gases are more difficult to measure than liquids, as measured volumes are highly affected by temperature and pressure. Gas meters measure a defined volume, regardless of the pressurized quantity or quality of the gas flowing through the meter. Temperature, pressure and heating value compensation must be made to measur actual amount and value of gas moving through a meter. Several different designs of gas meters are in commonly used . we offer these meters up to 12 Bar Line pressure which is diaphragm & rotery type meters as per line pressure requirments.

• Application Media: Water
• Power: Electric
• Supplier type: Factory
• Case: Steel / Aluminum
• Gas Type: Natural Gas/LPG

• Usage/Application: Industrial
• Gas Type: LPG
• Operating Pressure: 100 MBAR
•  :  
• Material: Aluminium

• Type: Automatic Density Meter
• Material: Aluminum, Cast Iron, Plastic, Stainless Steel
• Application: Industrial
• Color: Brown, Green, Grey, Maroon, Red, White
• Voltage: 110V, 220V, 230V, 380V, 440V, 450V
• Driven Type: Electric
• Feature: Accuracy, Digital Water Meter Display, Multi Jet
• Warranty: 1 Year, 2 Years
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Opearting Temperatue: 10-50D/C, 50-100D/C

LPG gas meter Index is compatible for implementing automatic meter reading system for remote reading and date management.Corrosion resistant powder coated (inside and outside) steel casing.

We are Providing all Types of Flow Meter for Natural Gas and Lpg.measuring Gas Flow,Consumption,Totalaizer,Temp also Connect to Pc.

• Voltage: 221V
• Packaging Type: BOX
• Power Supply: Electric
•  :  
• Display Type: Digital

• Item Number: G4
• Usage/Application: For LPG Gas
• Hardness: 55 HRC
• Material: MS
• Power: 40 W
• Frequency: 40 Hz

• Steel: 1",2",3",1/2",1/4",4",6"
• Steel: 1",2",3",1/2",1/4",4",6"

within the working range of the meter the rotor spins proportional to the actual velocity of gaseous material flowing. a pick-up sensor produces an electrical signal as each blade crosses through its low magnetic or rf field. this signal is amplified and conditioned by a transmitter or fed directly into a rate/totalizer, and represents the actual cubic feet per minute (acfm) flowing through the meter. the k-factor is stenciled on the meter body in pulses per actual cubic feet (p/acf). because gases are compressible, most people desire to measure the equivalent amount of gas corrected for the line pressure and temperature to standard cubic feet per minute (scfm at 60â°f, 14.69 psia). if the flow temperature and pressure are relatively constant, then a simple correction can be calculated to shift the k-factor from p/acf to p/scf and a simple totalizer (measurement systems india make ) may be used. when flow temperature and pressure are not constant, a flow computer. specifications linearity 1 â±1.0%/0.5% repeatability 1 â±0.25% maximum over-range 125% of flow rate for intermittent periods frequency output 0 to 1,100 hz voltage output approximately 100 mv@ 100 hz to 1.5 v (rms)@ 1,000 hz. pressure drop 0.5 psi at 100% of flow range pressure rating we manufacture flowmeters for most pressures. installation vertical or horizontal (any direction). materials of construction body: 316 l stainless steel. flanges: 316 stainless steel rotor: 431 stainless steel. rotor shaft/bearings: standard: tungsten carbide v-cup cartridge frame retainer: 302 stainless steel cartridge frame: 316 l stainless steel. temperature range:meter with bearing structure of: standard: tungsten carbide: -40â°f to 300â°f (-40â°c to 149â°c). for other temperatures consult factory.

• Application: Industrial
• Gas Type: LPG
• Material: Aluminium

• Application: Laboratory
• Brand: Metrix
• Type: Pulse output, 1 pulse, 0.01 m3/hr
• Model: G4-UG-PBS
• Connections: 1 Inch BS746
• Min Flow: 0.04 m3/hr
• Nominal Flow: 4m3/hr
• Max Flow: 6.0 3/hr

• Application: Industrial
• Brand: n
• Brand: n
• Brand: n

lpg flow meters

Flow Testing, High Pressure Flow Meter, Micro Flowmeter

CNG Filling Valve, gas refilling services

LPG Gas Meters, Cylinders Adapters & Compact Valve Adapter, Prepaid Gas Meter