Lube Oil System Dealers

• Brand Name: DHANASHREE ENGG
• Driven Type: Electric, Mechanical, Pneumatic
• Condition: New
• Rated Power: 1 PHASE 3 PHASE
• Automation Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Voltage: 230V, 440V
• Type: Centralised Lubrication Systems
• Warranty: 1year
• Country of Origin: India

• Application: Industrial
• Rated Power: 3-6kw
• Driven Type: Electric
• Automation Grade: Semi Automatic
• Country of Origin: India
• Features: Sturdy, High Performance, Low Maintenance

Oil Lubrication Systems are complete, self-contained systems designed for smaller applications such as stamping presses, punch presses and crushers. Each unit is locally assembled and tested for flow, pressure, sound levels and proper operation. Standard units usually include: electric motor and pump, oil filters, level indicators, flow meters, pressure gauge and steel oil reservoir.

The Oil Mist Lubrication System that we offer has a huge capacity. It is a pneumatically operated system. The air is prompted through On-Off solenoid valve. Airborne fog coats the bearings, gears etc. to form an oil film that reduces wear of machine parts. The air pressure required is from 4 to 6 kgcm2. Major Components : Oil Filling PortMist Outlet PortAir Inlet PortSolenoid Valve Features : DurableHigh strengthGood capacitySafe Usage

Turbine Lube Oil Purification System, Alfa Laval Oil Purifier

Re-refining is a profitable opportunity since lube oil can be re-refined as many times as you like, therefore becoming a very attractive business opportunity while safeguarding the environment.

To cater this need CEE DEE VACUUM provides a solution with supplying oil storage tanks. There are different types of these tanks. The tank and capacity can be designed to suit the application and are available in the following categories: Mobile (Capacity range 1KL - 35KL), With Insulation, Without Insulation.

  Oil Lubrication System We offer centralized Oil Lubrication Systems which ensure adequate supply of the oil at specific pressure and temperature for the desired applications to keep the rotating parts well lubricated. Our units are made as packaged units ready for piping. Our range of centralized Oil Lubrication Systems are high in demand in various industrial units. Features: It is totally re-circulating type. Oil is sucked from the reservoirIt is ejected on gears and bearingsHot oil returns back to the tankWhere oil is cooled before pushing towards the bearing and gear boxSystem is not of high pressureThere are terms like filters, coolers as optionalSimilar system is also provided for boiler and centrifuge

• Country of Origin: India
• Type: Centralised Lubrication Systems
• Certification: ISI
• Application: Rotameters
• Weight: 1000-1500kg, 1500-2000kg
• Voltage: 440V
• Condition: New
• Rated Power: 1-3kw, 3-6kw
• Driven Type: Electric
• Warranty: 1year
• Automation Grade: Fully Automatic
• Brand Name: PCD
• Rated Power: 3 KW

Lubcon Engineers Air Plus Oil Mix Lubrication System are designed for applications where minute amount of metered lubricant is required to be applied on a surface.   Lubcon Engineers Air Plus Oil Mix Lubrication System are designed for applications where minute amount of metered lubricant is required to be applied on a surface. The lubricant is metered using an oil injector and is carried to the mixing block where the air and oil get mixed. The air breaks the oil into minute droplets and carries it to the lubrication point. The mixture is then passed through the nozzles creating a fine spray of oil which can be applied on any surface. Air oil mix systems are used for conveyors, high speed spindle, band saw machines etc. The advantages of air oil mix system over conventional mist system are: More reliable than conventional venturi type mist systems More eco friendly More easily controllable No dripping Air Oil Mix 

In this system minimum quantity of oil is pushed by air in a narrow spiral tube and the tube is connected to the part of machine to be lubricated. The component of the machine / bearing is continuously supplied with droplet of oil. The air caries the oil droplet to the bearings & very small quantity of oil is supplied to bearings by using Lubomatic air-oil lubrication system the quantity of oil is precisely controlled. By using Lubomatic Air-Oil Lubrication system the machine can be operated at higher speed and productivity can be increased. The dust & dirt near by the bearings is forced away from the bearings and the bearing is kept clean & cool and lubricated. The air oil Lubrication is used in Grinding Machine Spindle Bearings Lubrication. Gear box lubrication of any machine. Rolling Mill bearing lubrication. Internal Grinding machine Bearing. Machine Slides Gear Train Conveyor chains ADVANTAGES The oil consumption is reduced considerably, compared to Oil-Mist lubrication. Reduced temperature of the bearings and the machine can be run at higher speed& inturn increase in the production. Due to continuous supply of fresh oil & air in right quantity. The bearings are protected from out side contamination & only minimum quantity of oil consumed. No mist in shop floor to breathe but only clean air.

• Brand Name: Southern Lube
• Automation Grade: Automatic
• Condition: New
• Maximum Pressure: 25 Ksc.
• Capacity: 3-500 L.P.M.
• Pressure: 10 Ksc.
• No Of Pump Element: 2

Our high quality Centralized Oil Lubrication Systems are used in applications where a consistent supply of lubricating oil is required such as bearings of Roller Mills, Paper Mills, Turbines and Gear Boxes. Our sturdy and trouble free COL systems ensure uninterrupted supply of filtered and cooled lubricating oil from a tank to the point of use. The oil is then collected and routed back to the tank. Broad Specifications : Tank Capacity : Up to 5000 ltrs.Flow Rate : Up to 1000 LPM (220 GPM)Motor : Up to 20 KW (25 HP)Suction Filter : 149 micronsDelivery Filter : 3 to 20 micronsDelivery Filter β rating : â‰Â¥75 - 200 (or higher)

• Brand Name: JASM
• Automation Grade: Automatic
• Condition: New
• Capacity (Litre Per Minute): 5 LPM
• Payment Terms: T/T (Bank Transfer)

• Brand Name: Pump - Aid
• Application: Superior Quality Barrings & Gears
• Condition: New
• Application: Industrial Rotating Equipment
• Country of Origin: Mumbai

We are a leading manufacturer and wholesale supplier of Lube Oil System from Mumbai in India. We offer advance Lube Oil Systems that do the dual tasks of cooling and lubricating. They are commonly used in industrial rotating equipment where pressurized lubricating oil is required.  We use superior quality bearings and gears along with other material to ensure performance, durability and quality of output.

We offer Oil Lubricating System. Oil Lubricating System is a type of accessories

• Brand Name: Bentex Industrials
• Country of Origin: Mandi Gobindgarh
• Type: Lubricating System
• Material: Latest Tool, Machines, Good Quality raw material
• Features: It provides a large array of quality tested oil lubrication system

Your search for quality assured Oil Lubrication System ends with us. We are the reputed Manufacturer, Exporter & Supplier of Manufacturer, Exporter & Supplier, providing a large array of quality tested Oil Lubrication System. The system is manufactured under the expert guidance of our professionals using latest tools and machines. Oil Lubrication System that we offer is made of optimum quality raw material and is available at competitive market prices.

  Unique has the technical know how an infrastructure to cater the lube oil requirements for TURBINE,PUMP,FAN,COMPRESSOR ,GEAR BOXES/DRIVEN EQUIPMENTS. The complete package is designed as per API 611 OR API 614 OR TAILOR MADE AS PER CUSTOMER REQUIREMENT. OIL RESERVOIR CAPACITY:UP TO 45,000 LTRS FLOW :UPTO 3500 LPM PRESSURE :UPTO 35 BAR We have more than 100 man years of experience in Design, Manufacture and testing of lube oil systems. We have manufactured more then 250 systems in last 3 years  

Advances in industrial processes and economic realities demand high productivity with higher efficiency and less downtime. Shaan Lube offers a complete range of productsservices to suit your project needs. Our custom engineered lubrication systems are designed to keep your critical plant and machinery running with sustained uptimes. Our systems offer years of glitch-free operations and precise quantity of lubrication at the required location at the right time. Our objectives are aligned with yours - to reduce bottom line operating and maintenance costs while running your manufacturing process smoothly. Whether you need a completed lubrication equipment package for a new mill installation or a single system, custom designed for your specific application, we have the solution for you. Our product range includes: • Centralized Oil Lubrication Systems from 5 LPM to 5000 LPM, Morgoil Bearing Lubrication Systems and Prejacking Systems • Roll Coolant Systems upto 25000 LPM • Air Oil Systems • Filters and Heat Exchangers • Specialty Systems including Vacuum Dehydrators, Oil Flow Monitors and Nortek Screw Pumps