Magnetic Mixer Dealers

Vessels other than Bioreactors like media preparation, buffer preparation, etc., which are part of the bioprocess require mixing. Bottom Magnetic mixers are used in these types of vessels. The Bottom Magnetic Mixers are similar to the Magnetic agitator other than the impellers and normally come without a shaft. The Magnetic Mixer is designed for liquid mixing applications and complies with the most stringent clean ability and sterilization requirements. Bottom Magnetic Mixers are totally cleanable and sterilization in place .This factor is very important in the cGMP compliant ADVANTAGES OF BOTTOM MAGNETIC MIXER Absolutely tight system No danger of contamination and leakage. Optimal for aseptic production. No influence on the integrity of the system. Easy cleaning and sterilization Can be done directly in the vessel by steam or water. Control of temperature The optimized mixing effect allows a temperature control, which was more difficult before at batch wise sterilization. Low shearing force The careful mixing allows handling of sensitive products Easy assembly Assembling and dismantling is very easier comparing a top-driven mixer which often requires a mechanical lifting device. Available capacity: 100liters to 10,000 Liters capacity

• Material: Stainless Steel , High Nickel Alloys
• Liquid Viscosities: Up To 800 CP
• Tank Capacities: Up to 30000 Litres
• Operating Temperature: 800 Degree Celsius To + 200 Degree Celsius
• Operating Pressure: Upto 7 Bars
• Colour: Multi Colour

We are counted among the leading Manufacturers and Exporters of Magnetic Drive Mixers. Popularly used for Pharmaceutical Applications, Seal-less Magnetic Drive Bottom Mounted Mixers are known for durability and efficiency. The Magnetic Drive Mixers have Impeller Magnets. The Impeller Magnets are designed to operate in pharmaceutical processes. Therefore, the Magnetic Drive Mixers are made free from cavities, hidden areas and sharp corners and are electro polished to a high degree of smoothness. The Magnetic Drive Mixer is available in Stainless Steel and High Nickel Alloys. Fabricated Vessels with Glass body are also available. Features Zero Leakage Sealless Design SIP / CIP Capable Complete Drainable Design Surface Finish of the wetted parts achieved up to � 0.25 Ra Available For Operating temperature up to �80OC to +200oC Operating Pressure up to 7 Bars Tank Capacities up to 30000 Litres Liquid Viscosities up to 800 CP Useful For Pharmaceutical Applications Media preparationBuffer preparation Cell Culture Fermentation Harvesting Purification Filtration Chromatography Centrifugation Dairy applications Food & Beverage Industries Custom built Reactor Vessels Laboratory applications Impeller Magnet (Mixing Head) Impeller Magnets basically consist of the following parts: Permanent Magnets capsulated in a Stainless Steel 316L Body Female Bearing fixed in the Stainless Steel 316L part Wings that links the Magnet Body and the Female Bearing Male Bearing Male bearings are made as follows: A Stainless Steel 316L stud with connection thread to the Weld Plate is used. Groove for the O Ring, Tightening Nut and shrinking tolerances for the bearing material is provided A solid piece of bearing material i.e. Sintered Silicon Carbide is fixed to the Stainless Steel stud by heat shrinking process The Outer surface of the bearing is then ground and polished to necessary tolerances Weld Plate (Tank Plate) The Weld Plate is made from a single piece of material and it becomes a part of the vessel after welding; it includes Connection thread for the Male Bearing Edges for Welding Connection points for the Drive Unit Drive Unit The Drive Unit consists of the following parts Connection Flange / Adapter to the Weld Plate Driver Magnet Geared Motor TC Clamp for Weld Plate Assembly (up to Model BAGI 2K)

• Certification: ISO 9001 2008
• Voltage: 440 Volts
• Condition: New
• After-Sales Service Provided: Engineers available to service machinery overseas
• Application: Liquid
• Brand Name: Adinath
• Supply Ability: 5 Unit/Units per Month
• Model Number: AMM
• Max. Loading Capacity: As Required
• Place of Origin: Gujarat, India
• Product Type: Cosmetic, Paint, Toothpaste & Etc.
• Port: Mumbai

We are leading manufacturer, supplier & exporter of Magnetic Mixers in Ankleshwar, Gujarat, India.Vessels other than Bioreactors like media preparation, buffer preparation, etc., which are part of the bioprocess require mixing. Magnetic mixers are used in these types of vessels. The Magnetic Mixers are similar to the Magnetic agitator other than the impellers and normally come without a shaft. The Magnetic Mixer is designed for liquid mixing applications and complies with the most stringent clean ability and sterilization requirements. Magnetic Mixers are totally cleanable and sterilization in place .This factor is very important in the cGMP compliant ADVANTAGES OF MAGNETIC MIXER Absolutely tight system No danger of contamination and leakage. Optimal for aseptic production. No influence on the integrity of the system. Easy cleaning and sterilization Can be done directly in the vessel by steam or water. Control of temperature The optimized mixing effect allows a temperature control, which was more difficult before at batch wise sterilization. Low shearing force The careful mixing allows handling of sensitive products Easy assembly Assembling and dismantling is very easier comparing a top-driven mixer which often requires a mechanical lifting device. Available capacity: 100liters to 10,000 Liters capacity

• Capacity: 20,000 liters

Basically a magnetic mixer is like a conventional mechanical mixer — it has a motor, a driveshaft, and mixing blades that mix stuff in a tank. Technically the term used for the mixing blade assembly in mixers is “impeller.” A propeller on a boat or an airplane is also a type of impeller. Impellers are designed to move liquids or gasses by rotating. What makes a magnetic mixer different from a conventional mixer is that the motor uses magnets to move the impeller. This works by attaching one set of magnets to the motor driveshaft and another set of magnets to the impeller.The advantage of magnetic stirrers is the suppression of sealing technology. The rotation of mixing elements is enabled by a magnetic field creating a touch-less torque transmission.

• Model: AMI0102003
• Stirring Position: 1
• Set-up Plate Dimension (mm): Φ 135mm
• Set-up Plate Material: S.S with ceramic coated
• Motor Type: DC motor
• Max. Stirring quantity (H20) (L): 5
• Max. Stirring Bar (L x Φ, mm): 55*10
• Motor Rating input (W): 3
• Motor Rating output (W): 2.5
• Speed Range (rpm): 100-1500
• Speed Display: LED
• Heating Output (W): 600
• Heating Temperature Range (°C): Room Temperature -280
• Temperature Display: LED
• Temperature Display Accuracy (°C): ±0.1
• Safety Temperature (0C): 50-320
• Extermnal Teperature Sensor: PT1000
• Control accuracy with external temperature sensor PT1000 (0C): ±1
• Hot Surface Warning: 500°C
• Permissible Ambient Temperature (°C): 5 - 40
• Permissible Related Humidity: 80%
• Protection class according DIN EN 60529: IP 42
• Voltage (VAC): 200-240/100-120
• Power (W): 630
• Dimension (W x D x H, mm): 268 x 160 x 85
• Weight: 1.8 kg

Magnetic Stirrer Home › Products › Magnetic Stirrer The company is the major Laboratory Magnetic Stirrer Manufacturer, Supplier and Exporter from Mumbai, India. We offer these Magnetic Stirrers in various grades and specifications to meet the diverse demands of the clients. Our Magnetic Stirrer is highly-demanded in UK and other Asian Countries. The range of Magnetic Stirrer, offered by us, is inclusive of Magnetic Stirrer With Hot Plate and Magnetic Stirrer Without Hot Plate. Magnetic Stirrer is packed using high-grade wooden and corrugated materials ensuring easy, safe and prompt delivery

• Capacity: 20 to 10000 Ltrs.

TECHNICAL SPECIFICATION :   Complete vessel design as per ASME Code. Instrumentation & connections comply with BPE & EHEDG guideline. Vessel design & fittings / Stirrer are designed for CIP / SIP able.   OPERATION :   Complete aseptic design with Magnetic mixer & high shear Magnetic emulsifier. Zero dead leg aseptic design Flush bottom outlet diaphragm valve with SIP able. Sampling valve zero dead leg type with CIP/SIP able. Volume monitoring by Load Cell. PH Sensor / Conductivity Sensor provided on demand for online check Product PH & Conductivity.   ADVANTAGES :   Free and clean working area around the charging port. Variable speed drive allows to control of mixing speed while batch preparation. Designed in accordance with cGMP requirements for CIP and SIP. Mixing head designed for vigorous mixing or low volume blending. Magnetically powered drive, NO SEALS / NO SHAFT thereby eliminating contamination. Easy removable of drive unit.

The Heidolph magnetic stirrers of the MR-series are perfectly suitable for smooth to intense mixing and heating of low-viscosity fluids. The Heidolph hot plate stirrer is your first choice for decomposing organic and inorganic substances. Aspects such as safety, convenience and cost savings have been considerably taken into account during the development of the stirrers. This is reflected in various unique product advantages of our lab hot plates. The KeraDisk hot plates allow for immediate heat transfer resulting in quick heat up times and chemically resistant surface.

Magnetic Mixers, Nauta Mixtures, inline mixers, twin shaft mixers

magnetic mixer, magnetic sealless agitators

• Warranty: 1 Year Manufacturer's Warranty
• Voltage: 440 Volts
• Application: Liquid
• Condition: New
• After-sales Service Provided:: Engineers available to service machinery overseas
• Dimension(L*W*H):: Depend on the proposition
• Place of Origin:: Gujarat, India
• Max. Loading Capacity:: As Required
• Product Type:: Cosmetic, Paint, Toothpaste & Etc.
• Power(W):: Depend on the proposition
• Mixer Type:: Homogrnizer, Planetary Mixer

Bottom Magnetic Mixer, vacuum transfer system, Contra Rotary Mixer

Magnetic Mixers And Agitators, Deltatox Ii Toxicity Monitor

magnetic mixer, Bottle Air Jet Vacuum Cleaning Machine

Magnetic Mixers, ac condensers, dry coolers, Compact Systems

magnetic mixer, Process Equipment

Sterile Solution Mixer Magnetic Mixer, Iet D250 Shrink Labeling Machine

magnetic mixer, Pre-Filled Syringe Filling Machine