Marshall Stability Apparatus Dealers

• Integral type proving Ring capacity: 3000Kgs
• A dial gauge: 0.01 x 25mm.

Originally developed by Bruce Marshall, a highway engineer in U.S.A later on standardized by ASTM. Generally the test is applicable to hot mix designs using bitumen and aggregates upto a maximum size of 25mm. In this method, the resistance to plastic deformation of cylindrical specimen of bituminous mixture is measured when the same is loaded at periphery at 5cm per min. This test procedure is used in designing and evaluating bituminous paving mixes. The test procedure is extensively used in routine test programmers for paving jobs. There are two major features of the Marshall method of designing mixes namely. a) densityvoids analysis, b) Stability-flow tests. The Marshall stability of mix is defined as a maximum load carried by a 0 compacted specimen at a standard test temperature of 60 C. The flow value is deformation the Marshall test specimen at under goes during the loading upto the maximum load, in 0.25 mm units. In this test and attempt is made to determine optimum binder content for the type of aggregate mix and traffic intensity.

• Power: 220 Volts/AC
• Capacity: 5000 kg

We manufacture Marshall Stability Test Apparatus, which is used to measure the resistance of plastic flow of paving bituminous mixture that is loaded on lateral surface. The instrument is used with hot mixture that contains asphalt with specimen molds, base plates, specimen extractor and breaking head assembly. Load transfer bar and loading unit Uniform vertical movement of 5.08cmmin Fitted with reversing and limit switch

• Country of Origin: India
• Type: Automatic
• Material: Stainless Steel
• Application: Industrial
• Color: Blue
• Voltage: 220V
• Warranty: 1 Year

For the measurement of the resistance to plastic flow of cylindrical specimens of bituminous pouring mixture loaded on the lateral surface. This is for use with hot mixture containing asphalt or tar and aggregate up to 25 mm maximum size.

• Material: Metal
• Color: Metallic, Silver
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant

Marshall Stability Test Apparatus is utilized for designing and evaluating bituminous paving mixes. The test is carried out as a routine test program for paving jobs. The test is applicable to hot mix designs that use bitumen and aggregates up to a maximum size of 25mm. Our Marshall Stability Test Apparatus consists of a motorized loading unit with two telescopic pillars and an adjustable cross head. Limit switches are also installed inside in order to control the upward or downward movement of the pillars. The two majors features of Marshall Stability Test Apparatus are density voids analysis and stability. The marshal stability of a particular mix is defined as a maximum load carried by a compacted specimen at a standard test temperature of 60oC.

• Brand Name: Subi Tek
• Application: Laboratory
• Power: 230V
• Model Number: 20004
• Place of Origin: Covai
• Blue: Blue

Marshall Stability Test Apparatus The test is applicable to hot mix designs using bitumen and aggregates upto a maximum size of 25mm. In this method, the resistance to plastic deformation of cylindrical specimen of bitumenous mixture is measured when the same is loaded at periphery at 5 cm per min. This test procedure is used in designing and evaluating bitumenous paving mixes. The test procedure is extensively used in routine test programmes for paving jobs. There are two major features of the marshall method of designing mixes namely, a) density â�� voids analysis b) Stability â�� flow tests. The marshall stability of mix is defined as a maximum load carried by a compacted specimen at a standard test temperature of 60�ºC. The flow value is deformation the marshall test specimen under goes during the loading upto the maximum load, 0.25 mm units. In this test and attempt is made to determine optimum binder content for the type of aggregate mix and traffic intensity. Taag: Marshall Stability Test Apparatus Dealer in Chennai, Marshall Stability Test Apparatus manufacture in Tamilnadu Marshall Stability Test Machine in Tamilnadu, Marshall Stability Test Machine in Chennai, Marshall Stability Test Machine in Kanchipuram, Marshall Stability Test Machine in Tiruvallur, Marshall Stability Test Machine in Cuddalore, Marshall Stability Test Machine in Villupuram, Marshall Stability Test Machine in Vellore, Marshall Stability Test Machine in Tiruvannamalai, Marshall Stability Test Machine in Salem, Marshall Stability Test Machine in Namakkal, Marshall Stability Test Machine in Dharmapuri, Marshall Stability Test Machine in Erode, Marshall Stability Test Machine in Coimbatore, Marshall Stability Test Machine in The Nilgiris, Marshall Stability Test Machine in Thanjavur, Marshall Stability Test Machine in Nagapattinam, Marshall Stability Test Machine in Tiruvarur, Marshall Stability Test Machine in Tiruchirappalli,

• Material: Steel
• Voltage: 220V
• Power: 0.25 To 5 kw
• Brand Name: Steco
• Automation: Semi-Automatic
• Capacity: 50 KN
• Phase: Single Phase
• Ring Capacity: 30 KN
• Usage: Marshall Stability Testing

We are connected with well-known transport providers to make sure the distribution of deliveries is done out without a problem and on time. We own a substantial warehouse to keep the stacked products safely until final dispatch. With the leading technologies and automated systems, we ensure that the fragile products are sternly packed and piled up systematically.   Product Code : EKE 550-1It consists of : EKE 552-1 Marshall Load Frame cap 25 KN, single speed, 50.8mm / min. 1 No. EKE 55001 Breaking Head Stability Mould, with a dial gauge EKE 072 (having 25 mm travel and 0.01 mm least count), for flow measurement 1 No. EKE 55002 Compaction Mould, Steel, cylindrical 3 Nos. EKE 55003 Base Plate 3 Nos. EKE 55004 Extension Collar 3 Nos. EKE 55005 Compaction Pedestal, Manual Operation, comprising a Steel Plate capped on a wooden post. A Mould Clamp is fitted to the top of the plate 1 No. EKE 55006 Compaction Hammer, for use with Compaction Pedestal and Mould, weight 4.5 kg with a free fall of 457 mm 2 Nos. EKE 55007 Load Transfer Bar 1 No. Essential Accessory EKE 271 Proving Ring, capacity 25 kN (2,500 kgf) EKE 55020 : Electronic Conversion Kit for Marshall Apparatus EKE 550 Marshall Apparatus with two speeds - 50.8 and 61 mm per minute is also available on request.

• capacity: 3000 kg

We have parted our infrastructure into different units and one of them is warehouse wherein we keep our product lot for meeting urgent and bulk requirements of the buyers at a time. We have advanced packaging systems available to make sure that the products are packed using the experts approved packaging stuff. We source the material from the leading vendors in the industry.

• capacity: 5 kg/1gm or 2 kg/0.1 gm

Used for the measurement of resistance to plastic flow of cylindrical specimens of bituminous paving mixtures when tested in a marshal load frame. Test specimens are produced and tested at a speed of 50.8mmmin.The maximum load(stability) and deformation(flow) of the specimen are recorded. Generally the test is applicable to hot mix designs using bitumen and aggregate of maximum size of 25mm. Widely used for designing and evaluating bituminous paving mixes. Comprising of a hard wood block with a steel plate, complete with specimen holder, semi circular base and a circular top to hold 4” dia specimen mould in place during compaction of the specimen. (Pedestal to accommodate 6” dia specimen can be supplied at extra cost), Flow meter Dial Gauge with 0.01mm graduation and 25mm travel.

We manufacture superior quality Marshall Stability Test Apparatus for the measurement of the resistance to plastic flow of cylindrical specimens of bituminous pouring mixture loaded on the lateral surface. Our Marshall Stability Test Apparatus is made of superior quality raw materials and equipment that make it highly useful in various sectors. The Apparatus is precision engineered to work with perfection. We custom manufacture Marshall Stability Test Apparatus as per the specifications of the clients. Working This is for use with hot mixture containing asphalt or tarAggregate up to 25 mm maximum size Attributes Accurate constructionCustom manufacturedEasy operational featuresOffer test results with perfection The equipment comprises of following Three specimens cylindrical mould 100 mm diametermeterThree base platesThree collars 100 mm diametermeterTwo compaction hammers, 10 lbs. Weight, with 45 cm dropOne specimen extractorOne compaction pedestal complete with specimen holderOne breaking head assembly. Complete with diameterl micrometer and bracket for flow measurementOne load transfer barOne loading unit, motorized, with travel of 50 mm/min and fitted with motor, reversing switch and limit switches to restrict the travel. Fitted with hand wheel for finer adjustment to bring the proving ring in contact with breaking head assembly, capable of application of loads up to 5000 kg. Suitable for operation from Main supply 230 volts, 50 cycles, single phase, A.C.Proving ring of 5000 kg (50 K.N.)Diameterl gauge .01 mm x 25 mm travel

The equipment consists of the following replaceable parts Marshall load frame cap. 50kn Limit switch protection for both upward and downward travel Load cell cap . 5000 kgf Displacement transducer 50 mm Two channel indicator -1 no. Breaking head stability mould -1 no. Compaction mould -3 nos. Base plate -3 nos. Extension collar-3 nos. Compaction pedestal -1 nos.

Buy precision-engineered and high in performance Magnetic Stirrer Without Hot Plate from us at market leading prices. We are one of the leading Manufacturers, Exporters and Suppliers of Marshall Stability Test Apparatus. Reckoned for its user-friendliness, smooth operation and reliability, our Marshall Stability Test Apparatus is among the best in the market. We provide it as per specifications given by customers. Our prices are reasonable and we offer discounts.  More About Marshall Stability Test Apparatus : This apparatus is used for test, which is applicable to hot mix designs using bitumen and aggregates up to a maximum size of 25 mm. In this method, the resistance to plastic deformation of cylindrical specimen of bituminous mixture is measured when the same is loaded at periphery at 5 cm per min. This test procedure is used in designing and evaluating bituminous paving mixes. The test procedure is extensively used in routine test programs for paving jobs. There are two major features of the Marshall method of designing mixes namely, a) density – voids analysis b) Stability – flow tests. The Marshall stability of mix is defined as a maximum load carried by a compacted specimen at a standard test temperature of 60ºC. The flow value is deformation the Marshall Test specimen under goes during the loading up to the maximum load, 0.25 mm units. In this test and attempt is made to determine optimum binder content for the type of aggregate mix and traffic intensity.   Loading Frame : Capacity 50 KN (5000 kgf.) motorized, with two telescopic pillars and an adjustable cross head. Limit switches are fitted inside to control upward or downward movement of the pillars. On-off reversing switch and indicator lamps are on the front side while a hand wheel to manually move the pillars is on the right. Electrically operated having constant rate of strain 50.8mm/minute Suitable for operation on 220/230 Volts Single phase A.C. Supply The apparatus consists of : Compaction Mould - Complete with Specimen mould 10.16cm I.D. x 7.6cm high with interchangeable collar and base plate duly chromium plated as per latest standard.  Sample Extractor - Used to extract sample from mould consists of a thrust plate and loading bar.  Compaction Pedestal - Consists of compaction rammer having 4.5 kg weight with a free fall of 457mm used with compaction pedestal comprises a wooden block capped with a steel plate and mould assembly  Breaking Head - Consists of upper and lower cylindrical segment of test head having inside radius of curvature 5cm.  Optional Accessories : Integral type Proving Ring capacity 3000 kgs. A dial gauge 0.01 x 25mm Universal Water Bath S.S. with false bottom and pyramid shaped lid to accommodate 3 Nos. Marshall specimen Thermometer 0 - 250oC x 1oC

We are the largest manufacturer, exporter and supplier of Marshall Stability Testing Apparatus in Kolhapur, India. This is used to measure the resistance to plastic flow of cylindrical specimens, that of bituminous paving mixture that is loaded on the lateral surface. They have a capacity of 5000kg and is suitable for operation on 220 volts Ac. They are designed as per the industry standards and norms using latest techniques. We handle large orders efficiently with an assurance of timely and safe delivery. Other Details : It will be having digital display to measure the load up to 5000 Kg/ 50 KN Facility to read in kg. and KN. It will be supplied with load cell and LVDT to measure load and flow on the same display panel. Tare system to nullify initial loadThe digital LCD display will retain the peak value until it is cleared. Digital display of Flow value at maximum load no need of separate watch on dial gauge Auto cut off of electric current to motor on attaining peak load Provision for default calibration (self calibration) Load cell can also be calibrated using standard reference Indication of rate of travel in inch/minute. Panel cut out size 92 x 188 MMS. With PC/printer interface with software fir direct printout of calculated results (at extra cost)

The test is applicable to hot mix designs using bitumen and aggregates upto a maximum size of 25mm. In this method, the resistance to plastic deformation of cylindrical specimen of bitumenous mixture is measured when the same is loaded at periphery at 5 cm per min. This test procedure is used in designing and evaluating bitumenous paving mixes. The test procedure is extensively used in routine test programmes for paving jobs. There are two major features of the marshall method of designing mixes namely, a) density – voids analysis b) Stability – flow tests. The marshall stability of mix is defined as a maximum load carried by a compacted specimen at a standard test temperature of 60ºC. The flow value is deformation the marshall test specimen under goes during the loading upto the maximum load, 0.25 mm units. In this test and attempt is made to determine optimum binder content for the type of aggregate mix and traffic intensity. Salient Features The apparatus consists of : 1) A loading unit motorized, capacity 5000kgf with two telescopic pillars and an adjustable cross head. Limit switches are fitted inside to control upward or downward movement of the pillars. On-off reversing switch and indicator lamps are on the front side while a hand wheel to manually move the pillars is on the right. The load frame has fixed speed of 5.08cm per minute. Operated on 230 Volts A.C. 2) 1 No. Compaction pedal with specimen mould holder. 3) 2 Nos. Compaction Rammers, 4.5kg weight and free fall 45.7cm. 4) 1 No. Breaking head assembly with provision to fix flowmeter. 5) 3 Nos. Specimen mould 10.16cm I.D. x 7.6cm high with base plate and extension collar. 6) 1 No. Kit for specimen extraction, consists of one each load transfer bar, steel ball, specimen extracting plate. Accessories : (a) Integral type Proving Ring capacity 3000 kgs. (b) A dial gauge 0.01 x 25mm (c) Universal Water Bath S.S. with false bottom and pyramid shaped lid to accomodates 3 Nos. marshall specimen (d) Thermometer 0 - 250ºC x 1ºC

• Material: Mild Steel
• Application: Laboratory
• Voltage: 220V
• Driven Type: Electric
• Warranty: 1yrs

• Brand Name: Quality Engineering Corporation
• Place of Origin: Roorkee
• Feature: measures the resistance of imstruments
• Usage: Used with mixture containing tar, aggregates
• Size: 25 mm

Marshall Stability Test Apparatus that we offer accurately measures the resistance of instruments against plastic flow of cylindrical specimens of bituminous pouring mixture loaded on the lateral surface. It is used with hot mixture containing asphalt or tar and aggregates up to 25 mm maximum size. We are counted among the top Manufacturers and Suppliers of Marshall Stability Test Apparatus from Uttarakhand, India.

Marshall Stability Test Apparatus complies with the ASTM:D – 1559 , which signifies its high-standards. Marshall Stability Test Apparatus is used in highway departments, contractors, engineers, testing laboratories and governmental agencies. The test is intended for the measurement of the resistance to plastic flow of cylindrical specimens of bituminous paving mixture loaded on the lateral surface, for use with hot mixture containing asphalt or tar and aggregate up to 25.4 mm maximum size. The equipment consists of the following Three specimen moulds-cylindrical 4 inches dia with base plate and collar One specimen extractor rod One compaction pedestal-complete with specimen mould holder One breaking head assembly Complete with dial gauge 0.01x25 mm for flow measurement One load transfer bar One loading unit One proving ring capacity 5000 kg fitted with dial gauge 0.002 mm with our own calibration chart. Two compaction hammer weight 4.5 kg each with 18 inches drop It is motorized with a travel of two inches/minimum. In addition, it is fitted with a motor reversing switch and limit switches to restrict the travel in either direction. It is fitted with hand wheel for final adjustment to bring the proving ring in contact with breaking head assembly capable of application of loads up to 5000 kg. Suitable for operation on ½ Hp Single Phase 230 volts 50 Hz AC supply.

• Price: Approx. Rs 72,000 / Unit(s)

Marshall Stability Apparatus which we offer are one of the highly acknowledged products known for its compactness, good strength and long life. Our product is fabricated using three mild steel moulds along with 50Kn capacity, two compaction rammers, load transfer bar, extraction plate, steel ball, etc. Apart from this, modified version with capacity 100KN is also available with us. It smoothly functions with AC mains of 220volts.   Detail : We are involved in offering an extensive range of Marshall Stability Apparatus. This Marshall Stability Apparatus comprises three mild steel mould 4 dia, 50 kN capacity electrically operated load frame with speed of 5.08cm/min, two compaction rammers 4.5 kg. weight and 457 mm fall and one each of breaking head assembly with provision to hold dial gauge, load transfer bar, compaction pedestal (manually operated) with mould holder, extraction plate and steel ball. We provide this product with 25 kN capacity proving ring with our calibration chart and dial gauge 0.01 x 25 mm travel. Modified Marshal Stability Apparatus, with 100kN capacity load frame, suitable for 6 samples Tar Viscometer After confirming each and everything from customers, we present them a personalized assortment of Tar Viscometer. Offered Tar Viscometer is extensively used for determination the viscosity of road oils and cut back bitumen. Our product comprises copper bath with cup of 10 mm or 4 mm orifice and sleeve, with lifting clip and ball. The assembly placed on suitable stand. Also, it is suitable to operate on 220 Volts AC mains.   Features : Compact design High tensile strength Long service life

• Voltage: 220/230 V
• Integral type Proving Ring capacity: 3000 kgs.
• Capacity: 50 KN
• Constant: 50.8 mm/minute
• Gauge: 0.01 x 25 mm

• Material: MS AND SS
• Driven Type: Electric
• Color: SKY BLUE
• Application: BITUMEN TESTING
• Brand Name: MITRA
• MODEL NO.: MITRA-003
• WEIGHT PRODUCT: 150 KG APPROX
• MOTOR: 1/4HP LOWKIM WITH 6MONTH WARRANTY

We are engaged in distributing Marshall Stability Test Apparatus that are widely used for measuring resistance to plastic flow of cylindrical specimen of bituminous pouring mixture loaded on the lateral surface. Offered apparatus is extensively used with a hot mixture containing tar or asphalt and average up to 25 mm maximum size. Customers can avail these apparatus from us in various specifications as per their needs and requirements.

It consists of body housing, a geared screw jack and motor drive mechanism suitable for operation on 230 V, 50Hz, Single Phase, A.C. supply.

Marshall Apparatus Consists Of: Robust construction 50KN capacity Rate of travel 50.8mm/min Safety cut-off switch It consists of body housing, a geared screw jack and motor drive mechanism suitable for operation on 230 V, 50Hz, Single Phase, A.C. supply. A. MARSHALL LOAD FRAME 1 No. B. Breaking Head Stability Mould, with a dial gauge ( having 25mm travel and 0.01mm least count), for flow measurement 1 No.C. Compaction Mould, Steel cylindrical 3 Nos.D. Base Plate 3 Nos.E. Extension Collar 3 Nos.F. Compaction Pedestal, Manual Operation, Comprising a steel plate capped on a wooden post. A Mould Clamp is fitted to the top of the plate . 1 No.G. Compaction Hammer, satisfies BS 598. The hammer has a 4535 g sliding weight with a free fall of 457 mm 2 Nos.H. Load Transfer Bar 1 No. I. Paper Discs, Non absorbent, 11 cm diameter pack of 100 No. 1 Pkt.

We provide Marshall Stability Apparatus, which stands apart among its competitors owing to its remarkable quality. Our Marshall Stability Test Apparatus endows with accurate results, which has made it a preferred pick among the customers. The Stability Apparatus, which we manufacture, is specially designed as per the ASTM-D-1559 Standards that includes all instruments necessary for providing precise results. We are recognized as one of the prominent Marshall Stability Equipment Suppliers. Features : • Ideal for determining resistance to plastic flow of cylindrical specimens of bituminous mixture • Effortless maintenance • Easy operations • Extremely efficient