Fatigue Testing Machine
Get Price Quote
1 Piece (MOQ)
gsm testing machine
Get Price Quote
Owing to our industrial expertise accumulated over time, we have established ourselves as a leading Manufacturer, Exporter & Supplier in the industry. We offer GSM Testing Machine to our esteemed customers at attractive price. GSM Round Cutter boasts striking features such as light weight, strong built and durability. GSM Balance is used for determining GSM of knitted, woven and non-woven fabrics. It is also ideal for preparation of the sample for calculating the GSM (Gram per Square) of fabric. Specifications Vgotech Gsm Round Cutter With lock system for total safety. with 4Nos Imported Blades and 2Nos. Rubber Pads Vgotech Gsm Round CutterSpecimen Area : 100 Cm2 Specimen Diameter : 113 Mm (Approx) Type Of Cut : Standard [GSM = Specimen Weight in Grams x 100] Vgotech GSM Cut & Fit Cutter Standard Model (Wheel Model ) Pad & Blades are not required. SAY No requirement of GSM Pad and Blade Pay back period 3 – 6 Months Hold Complete Grip on the Fabric with minimal efforts 3 Nos. Imported Metal cutting Wheels perfectly synchronized to get precise 100cm2 Cut & Long Life. With a smooth rotation the GSM sample will be cut. Can be used for Woven, Non Woven or Knitted fabrics, Film, Carpet, Foam Paper and Board Features : Area of Circle : Pie X Redius2 = 22/7 X 5.64 X 5.64 = 3.14 X 5.64 X 5.64 = 100cm2 GSM Balance (Electronic Weighing Balance) Model No. - EK01 Capacity - 600gm
Best Deals from Material Testing Equipment
Fatigue Testing Machine
126,400 Per Piece
1 Piece (MOQ)
Surface Roughness Tester
120 - 5,050 Per Piece 200
1 Piece(s) (MOQ)
Riffle Sample Divider
Get Price Quote
1 Piece (MOQ)
Riffle sampler divider, (Close body) We are offering a wide range of Riffle Sample Divider. Riffle sample dividers are used for the easy dividing and reduction of bulk material samples with particle sizes ranging from less than 1 mm up to a maximum of 10 mm. Our Riffle sample divider consists of a sheet metal box mounted on legs and fitted with a series of chutes or equal width which discharge the material alliteratively in opposite directions into speculate panes. This equipment is mainly used for sampling aggregates, cement, ores, refractory materials, pigments, soap, powdered coal etc. It is also used for rapid collection of true representative sample from aggregates. Slot width 12.5/13mm nos of slot 14: Rs.7500/- Slot width 15mm nos of slot 14: Rs.8500/- Slot width 20mm nos of slot 14: Rs.9500/- Slot width 25mm nos of slot 14: Rs.10500/- Slot width 50mm nos of slot 8: Rs.12500/-
Servo Hydraulic Fatigue Testing Machine
Get Price Quote
Defectovision Ir Inductive Heat Flux Thermography
Get Price Quote
1 Unit (MOQ)
Innovative testing with FOERSTER The DEFECTOVISION IR system is an addition to FOERSTER's core competence, the non-destructive testing of semi-finished metal products. All around the world, more than 6.5 million tons of steel have been tested safely and efficiently by now with our latest technology. The automatic infrared technology applied by FOERSTER provides new approaches for previously impossible testing tasks. Inductive heat flux thermography facilitates the testing of entire surfaces of hot-rolled steel billets and tubes with round, square, or rectangular cross-sections as well as rails and profiles. Flat surfaces as well as exterior and interior radiuses are tested fully and reproducibly. All but a few millimetres of the ends of the materials are also covered by the surface test. Technical Data: Test products: Round and square ferromagnetic steel billets Diameter / edge length: 50 – 300 mm Test product length: min. 4 m Max. test speed: 1.5 m/s Untested ends: type 5 mm Minimum defect depth: 0.3 mm Minimum defect length: 10 mm Your advantages at a glance: • Fully automatic testing of round and profiled steel billets, tubes, and rails • Adjustable defect thresholds for targeted depth selection • Reduces repair costs by suppressing incorrect warnings • Comprehensive electronic documentation of the test results • Integration in existing production and quality systems • Contactless and non-wearing technology • Compact design for integration in existing production lines • High throughput • Test fully covers the entire material surface • Detection of even the smallest material defects
UV Curator
20,000 - 25,000 Per Unit
1 Piece (MOQ)
Fatigue Testing Machine
400,000 - 600,000 Per Kilogram
PAPER SURFACE OIL ABSORBENCY TESTER
80,000 Per Piece
1 Piece (MOQ)
PAPER SURFACE OIL ABSORBENCY TESTER
55,000 Per Piece
1 Piece (MOQ)
Fineness of Grind Gauge
Get Price Quote
Fineness of Grind Gauge (Hegman Gauge) is a precision gauge manufactured from hardened stainless steel and has two ground channels giving scales of both microns and hegman.Grind Gauge is supplied complete with scraper blade. Hegman gauges are available in three models 0 to 25 micron, 0 to 50 micron, 0 to 100 micron. Grind Gauge Hegman Gauge Particle Size Gauge is used for the checking and controlling the production, storage, and application of dispersion products produced by milling in the paint, plastic, pigment, printing ink, paper, talcum ceramic, pharmaceutical, food, chmicals and many other industries.In operation the samples are placed into the top end of the hegman gauge and then drawn down using the scraper blade.
Tensile Material Testing Machine
Get Price Quote
We offer supreme quality Tensile Material Testing Machine characterized with precision screw and column construction and variable speed drive. The Tensile Material Testing Machine is suitable for studying mechanical behavior of various materials like metals, polymers, elastomers etc. The Tensile Material Testing Machine confirms to IS, BS & ASTM standards.
Mitutoyo Surftest Meter
Get Price Quote
5 Piece (MOQ)
Le Chatelier Mould
Get Price Quote
1 Piece(s) (MOQ)
Rubber Hardness Tester
1 Per Piece
1 Piece (MOQ)
The hardness is obtained by the difference in penetration depth of a specified dimension ball under two conditions of contact with the rubber. a) with a small initial force b) with a much large final force The differential penetration is taken at a specified time and converted to a hardness scale value. The IRHD Tester made a vertical plunger. The lower side of the plunger has an indenter. The lower shape of the indenter is ball type of specified dimension. The upper sides of the plunger have a good eclectic conductive tip. The weight of the plunger and fitting attached to it is the minor force. A big brass weight is the major force of the specified weight. A dial gauge is attached to the instrument for the measurement of the penetration depth of the indenter to the rubber. An electricity operated buzzer, for gently vibrating the apparatus to overcome the slight friction is mounted under the cover of the instrument. The tester is finished in NC based painting and bright chrome plating to give it a corrosion resistance finish. RELATED STANDARD ASTM D 1415 – 81 –Rubber property – International Hardness
DIGITAL SURFACE ROUGHNESS TESTER
111,000 Per Piece
Material Testing Equipment
Get Price Quote
We bring forth a diverse range of optimum quality Material Testing Equipment which is fabricated using high grade metals and by employing advanced technological methods. Utilized for the purpose of testing the various physical properties of different materials, our Construction Material Testing Equipment comprise of Spring Testing Machine, Pendulum Impact Tester, Izod Charpy Testing Machine, Tensile Testing Machine, Universal Testing Machine, Torsion Testing Machine for Rod or wire, Bursting Strength Tester, Hardness Tester, Flex Tester and Abrasion Tester. Aiding in quality assessment, product development as well as other research activities, our Universal Material Testing Equipment is used for testing Rubber, Plastic, Footwear, Leather, Paper and Petroleum products. We are engaged in manufacturing equipments both in standard as well as per customer’s special requirement. This has made us one of the prominent Manufacturers in our domain.
Baker Roughness Tester
Get Price Quote
1 Piece (MOQ)
Features: Ergonomic design, small size, light weight, easy to operate. The stylus drive unit can be fitted in the main unit for standard measurement, or separated from the display unit, which allows more flexible measurement in any orientation. Bluetooth capability; supports wireless connection with mobile and mini printer. Built-in lithium battery, working time over 50 hours. Power-saving features as auto sleep & auto power off. Large capacity data storage; storage of 100 items of raw data and measured profiles.
0.0
Website
Le Chatelier Mould
Get Price Quote
We are one of the well known Manufacturers and Suppliers of Le-Chatelier Mould, which has been fabricated in accordance with IS: 5514. We produce these Le-Chatelier Moulds using excellent quality raw materials to ensure durability. The Le-Chatelier Mould is used for soundness test of cement. Major Components The apparatus comprises of a small split cylinder thereby making a mould of 30mm internal dia. and 30mm high. On both side of the split cylinder, two parallel indicating arms having pointed ends that are fixed. Further, the mould is supplied with lead weight and two glass plates. A set of six molds is offered in a cardboard box with the unit.
Post Free Ad
